thomas/dotfiles
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Fix: Disabled VRR to stop flickering on Acer monitor

Browse Source 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
Thomas Williams
2026-10-09 16:53:56 +01:00
parent 84828e58bc
commit 72db6ca784
4 changed files with 16 additions and 6 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
dotfiles/.config/hypr/UserConfigs/monitors.conf
View File

@@ -8,5 +8,5 @@
# <<<<< TUI AUTO START
monitor=desc:LG Electronics LG ULTRAWIDE 0x0002E68A,2560x1080@60.00000,1920x-740,1.00000000,transform,3,vrr,0
monitor=desc:HP Inc. HP 524pf VNG447017D,1920x1080@100.00000,-1920x0,1.00000000,transform,0,vrr,0
monitor=desc:Acer Technologies VG240Y S 0x126191DE,1920x1080@165.00301,0x0,1.00000000,transform,0,vrr,1,bitdepth,10,cm,wide
monitor=desc:Acer Technologies VG240Y S 0x126191DE,1920x1080@165.00301,0x0,1.00000000,transform,0,vrr,0,bitdepth,10,cm,wide
# <<<<< TUI AUTO END

9
dotfiles/.config/hypr/core/hyprmod.lua
View File

@@ -5,6 +5,11 @@
-- whatever it last wrote. If you reinstall HyprMod, prefer letting its own "Migrate to Lua…"
-- wizard take over managing this file instead of hand-editing it going forward.
-- vrr forced off globally: the per-monitor vrr = 0 flag below does NOT override this when
-- misc.vrr is 1 (tested live on Hyprland 0.56.2 — DP-2 stayed vrr:true until this global
-- was changed). DP-2 (Acer VG240Y S) flickers under VRR when idle in fullscreen (mouse
-- stationary -> no repaint damage -> frame delivery stalls near the panel's VRR floor).
-- The other two monitors don't negotiate VRR at all, so this has no effect on them.
hl.config({
general = {
allow_tearing = true,
@@ -13,12 +18,12 @@ hl.config({
},
},
misc = {
vrr = 1,
vrr = 0,
},
})
-- Monitors
hl.monitor({ output = "DP-2", mode = "1920x1080@165.00Hz", position = "0x0", scale = 1, bitdepth = 10, cm = "wide" })
hl.monitor({ output = "DP-2", mode = "1920x1080@165.00Hz", position = "0x0", scale = 1, bitdepth = 10, cm = "wide", vrr = 0 })
-- Keybinds
-- (unbind = SUPER SHIFT, Print / unbind = SUPER, up from the source .conf have no Lua equivalent needed —

9
dotfiles/.config/hypr/hyprland-gui.conf
View File

@@ -2,10 +2,15 @@
general:allow_tearing = 1
general:snap:enabled = 0
misc:vrr = 1
# vrr forced off globally: the per-monitor vrr,0 flag below does NOT override this when
# misc:vrr is 1 (tested live on Hyprland 0.56.2 — DP-2 stayed vrr:true until this global
# was changed). DP-2 (Acer VG240Y S) flickers under VRR when idle in fullscreen (mouse
# stationary -> no repaint damage -> frame delivery stalls near the panel's VRR floor).
# The other two monitors don't negotiate VRR at all, so this has no effect on them.
misc:vrr = 0
# Monitors
monitor = DP-2, 1920x1080@165.00Hz, 0x0, 1, bitdepth, 10, cm, wide
monitor = DP-2, 1920x1080@165.00Hz, 0x0, 1, bitdepth, 10, cm, wide, vrr, 0
# Keybinds
unbind = SUPER SHIFT, Print

2
dotfiles/.config/hypr/layout/monitors.lua
View File

@@ -10,6 +10,6 @@
-- <<<<< TUI AUTO START
hl.monitor({ output = "desc:LG Electronics LG ULTRAWIDE 0x0002E68A", mode = "2560x1080@60.00000", position = "1920x-740", scale = 1.00000000, transform = 3, vrr = 0 })
hl.monitor({ output = "desc:HP Inc. HP 524pf VNG447017D", mode = "1920x1080@100.00000", position = "-1920x0", scale = 1.00000000, transform = 0, vrr = 0 })
hl.monitor({ output = "desc:Acer Technologies VG240Y S 0x126191DE", mode = "1920x1080@165.00301", position = "0x0", scale = 1.00000000, transform = 0, vrr = 1, bitdepth = 10, cm = "wide" })
hl.monitor({ output = "desc:Acer Technologies VG240Y S 0x126191DE", mode = "1920x1080@165.00301", position = "0x0", scale = 1.00000000, transform = 0, vrr = 0, bitdepth = 10, cm = "wide" })
hl.monitor({ output = "HEADLESS-1", mode = "1728x1080@60.00000", position = "4480x0", scale = 1.00000000, transform = 0, vrr = 0 })
-- <<<<< TUI AUTO END