Feature: cl alias now runs fastfetch after clear

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

dotfiles/.config/environment.d/ssh-agent.conf

@@ -0,0 +1 @@
+SSH_AUTH_SOCK=${HOME}/.bitwarden-ssh-agent.sock

dotfiles/.config/gtk-3.0/bookmarks

@@ -3,5 +3,6 @@ file:///home/thomas/Documents
 file:///home/thomas/Downloads
 file:///home/thomas/Pictures
 file:///home/thomas/Music
+file:///home/thomas/Videos
 smb://192.168.1.84/media/
 smb://192.168.1.85/music/

dotfiles/.config/hypr/UserConfigs/ENVariables.conf

@@ -51,10 +51,10 @@ env = ELECTRON_OZONE_PLATFORM_HINT,auto # auto selects Wayland if possible, X11
 # This is from Hyprland Wiki. Below will be activated nvidia gpu detected
 # See hyprland wiki https://wiki.hyprland.org/Nvidia/#environment-variables
 
-#env = LIBVA_DRIVER_NAME,nvidia
-#env = __GLX_VENDOR_LIBRARY_NAME,nvidia
-#env = NVD_BACKEND,direct
-#env = GSK_RENDERER,ngl
+env = LIBVA_DRIVER_NAME,nvidia
+env = __GLX_VENDOR_LIBRARY_NAME,nvidia
+env = NVD_BACKEND,direct
+env = GSK_RENDERER,ngl
 
 # additional ENV's for nvidia. Caution, activate with care
 #env = GBM_BACKEND,nvidia-drm
@@ -87,3 +87,6 @@ env = ELECTRON_OZONE_PLATFORM_HINT,auto # auto selects Wayland if possible, X11
 # env = HYPRLAND_NO_RT,1 # Disables realtime priority setting by Hyprland.
 # env = HYPRLAND_NO_SD_NOTIFY,1 # If systemd, disables the 'sd_notify' calls.
 # env = HYPRLAND_NO_SD_VARS,1 # Disables management of variables in systemd and dbus activation environments.
+
+# Bitwarden SSH agent (so GUI apps like VS Code see it, not just shells)
+env = SSH_AUTH_SOCK,/home/thomas/.bitwarden-ssh-agent.sock

dotfiles/.config/hypr/UserConfigs/monitors.conf

@@ -8,5 +8,5 @@
 # <<<<< TUI AUTO START
 monitor=desc:LG Electronics LG ULTRAWIDE 0x0002E68A,2560x1080@60.00000,1920x-740,1.00000000,transform,3,vrr,0
 monitor=desc:HP Inc. HP 524pf VNG447017D,1920x1080@100.00000,-1920x0,1.00000000,transform,0,vrr,0
-monitor=desc:Acer Technologies VG240Y S 0x126191DE,1920x1080@165.00301,0x0,1.00000000,transform,0,vrr,1,bitdepth,10,cm,wide
+monitor=desc:Acer Technologies VG240Y S 0x126191DE,1920x1080@165.00301,0x0,1.00000000,transform,0,vrr,0,bitdepth,10,cm,wide
 # <<<<< TUI AUTO END

dotfiles/.config/hypr/core/env.lua

@@ -49,10 +49,10 @@ hl.env("ELECTRON_OZONE_PLATFORM_HINT", "auto") -- auto selects Wayland if possib
 -- This is from the Hyprland wiki. Uncomment below if an nvidia GPU is detected.
 -- See hyprland wiki https://wiki.hyprland.org/Nvidia/#environment-variables
 
--- hl.env("LIBVA_DRIVER_NAME", "nvidia")
--- hl.env("__GLX_VENDOR_LIBRARY_NAME", "nvidia")
--- hl.env("NVD_BACKEND", "direct")
--- hl.env("GSK_RENDERER", "ngl")
+hl.env("LIBVA_DRIVER_NAME", "nvidia")
+hl.env("__GLX_VENDOR_LIBRARY_NAME", "nvidia")
+hl.env("NVD_BACKEND", "direct")
+hl.env("GSK_RENDERER", "ngl")
 
 -- additional ENV's for nvidia. Caution, activate with care
 -- hl.env("GBM_BACKEND", "nvidia-drm")
@@ -85,3 +85,6 @@ hl.env("ELECTRON_OZONE_PLATFORM_HINT", "auto") -- auto selects Wayland if possib
 -- hl.env("HYPRLAND_NO_RT", "1") -- Disables realtime priority setting by Hyprland.
 -- hl.env("HYPRLAND_NO_SD_NOTIFY", "1") -- If systemd, disables the 'sd_notify' calls.
 -- hl.env("HYPRLAND_NO_SD_VARS", "1") -- Disables management of variables in systemd and dbus activation environments.
+
+-- Bitwarden SSH agent (so GUI apps like VS Code see it, not just shells)
+hl.env("SSH_AUTH_SOCK", os.getenv("HOME") .. "/.bitwarden-ssh-agent.sock")

dotfiles/.config/hypr/core/hyprmod.lua

@@ -5,6 +5,11 @@
 -- whatever it last wrote. If you reinstall HyprMod, prefer letting its own "Migrate to Lua…"
 -- wizard take over managing this file instead of hand-editing it going forward.
 
+-- vrr forced off globally: the per-monitor vrr = 0 flag below does NOT override this when
+-- misc.vrr is 1 (tested live on Hyprland 0.56.2 — DP-2 stayed vrr:true until this global
+-- was changed). DP-2 (Acer VG240Y S) flickers under VRR when idle in fullscreen (mouse
+-- stationary -> no repaint damage -> frame delivery stalls near the panel's VRR floor).
+-- The other two monitors don't negotiate VRR at all, so this has no effect on them.
 hl.config({
     general = {
         allow_tearing = true,
@@ -13,12 +18,12 @@ hl.config({
         },
     },
     misc = {
-        vrr = 1,
+        vrr = 0,
     },
 })
 
 -- Monitors
-hl.monitor({ output = "DP-2", mode = "1920x1080@165.00Hz", position = "0x0", scale = 1, bitdepth = 10, cm = "wide" })
+hl.monitor({ output = "DP-2", mode = "1920x1080@165.00Hz", position = "0x0", scale = 1, bitdepth = 10, cm = "wide", vrr = 0 })
 
 -- Keybinds
 -- (unbind = SUPER SHIFT, Print / unbind = SUPER, up from the source .conf have no Lua equivalent needed —

dotfiles/.config/hypr/hyprland-gui.conf

@@ -2,10 +2,15 @@
 
 general:allow_tearing = 1
 general:snap:enabled = 0
-misc:vrr = 1
+# vrr forced off globally: the per-monitor vrr,0 flag below does NOT override this when
+# misc:vrr is 1 (tested live on Hyprland 0.56.2 — DP-2 stayed vrr:true until this global
+# was changed). DP-2 (Acer VG240Y S) flickers under VRR when idle in fullscreen (mouse
+# stationary -> no repaint damage -> frame delivery stalls near the panel's VRR floor).
+# The other two monitors don't negotiate VRR at all, so this has no effect on them.
+misc:vrr = 0
 
 # Monitors
-monitor = DP-2, 1920x1080@165.00Hz, 0x0, 1, bitdepth, 10, cm, wide
+monitor = DP-2, 1920x1080@165.00Hz, 0x0, 1, bitdepth, 10, cm, wide, vrr, 0
 
 # Keybinds
 unbind = SUPER SHIFT, Print

dotfiles/.config/hypr/layout/monitors.lua

@@ -10,6 +10,6 @@
 -- <<<<< TUI AUTO START
 hl.monitor({ output = "desc:LG Electronics LG ULTRAWIDE 0x0002E68A", mode = "2560x1080@60.00000", position = "1920x-740", scale = 1.00000000, transform = 3, vrr = 0 })
 hl.monitor({ output = "desc:HP Inc. HP 524pf VNG447017D",           mode = "1920x1080@100.00000", position = "-1920x0",   scale = 1.00000000, transform = 0, vrr = 0 })
-hl.monitor({ output = "desc:Acer Technologies VG240Y S 0x126191DE", mode = "1920x1080@165.00301", position = "0x0",       scale = 1.00000000, transform = 0, vrr = 1, bitdepth = 10, cm = "wide" })
+hl.monitor({ output = "desc:Acer Technologies VG240Y S 0x126191DE", mode = "1920x1080@165.00301", position = "0x0",       scale = 1.00000000, transform = 0, vrr = 0, bitdepth = 10, cm = "wide" })
 hl.monitor({ output = "HEADLESS-1", mode = "1728x1080@60.00000", position = "4480x0", scale = 1.00000000, transform = 0, vrr = 0 })
 -- <<<<< TUI AUTO END

dotfiles/.config/quickshell/modules/bar/SystemUpdate.qml

@@ -22,7 +22,7 @@ Item {
             font.family: SystemUpdates.checking ? Appearance.iconFontFamilyRounded : Appearance.fontFamily
             font.variableAxes: Appearance.iconFontAxes
             font.pixelSize: SystemUpdates.checking ? 15 : 22
-            color: SystemUpdates.updateCount > 0 ? Colors.primary : Colors.foreground
+            color: Colors.foreground
             text: SystemUpdates.checking ? "progress_activity" : "󰏖"
 
             RotationAnimation on rotation {

dotfiles/.zshrc

@@ -23,7 +23,7 @@ source $ZSH/oh-my-zsh.sh
 
 # My alias
 
-alias cl='clear'
+alias cl='clear && fastfetch'
 alias zed='zeditor'
 alias ssh-gavin='ssh thoams@192.168.1.83'
 alias ssh-raspberry-pi='ssh thoams@192.168.1.86'