Feature: Make home UniFi VPN row a collapsible card

Put the Replace config option behind an expand chevron, like Mullvad's
options, and frame the card while it's expanded.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

README.md

@@ -39,13 +39,26 @@ mkdir Projects
 git clone ssh://git@gitea.thomasleewilliams.co.uk:2222/thomas/dotfiles.git
 ```
 
-Once that is complete, run this command:
+On a fresh install, run the bootstrap script. It installs drivers (auto-detected),
+every package in `system/packages.txt`, yay, flatpaks, then links the dotfiles and
+system config below:
+```console
+~/Projects/dotfiles/bootstrap.sh            # asks about the optional SVT-AV1 + ffmpeg rebuild
+~/Projects/dotfiles/bootstrap.sh --svt-av1  # or --no-svt-av1 to skip the question
+```
+
+To only link the dotfiles, run this command:
 ```console
 stow -d ~/Projects/dotfiles/ -t ~/ dotfiles
 ```
 
 This will sync wallpapers/config files to where they are usually located
 
+System-level config (e.g. pacman options) lives in `system/` and is installed with sudo:
+```console
+~/Projects/dotfiles/system/install.sh
+```
+
 ## 📦 Programs
 
 List of programs and tools I use.

bootstrap.sh

@@ -0,0 +1,168 @@
+#!/usr/bin/env bash
+# Sets up a fresh Arch install: drivers, packages, dotfiles and system config.
+# Safe to re-run; anything already installed is skipped.
+#
+# Usage: ./bootstrap.sh [--svt-av1 | --no-svt-av1]
+#   --svt-av1     also install svt-av1-essential-git and rebuild ffmpeg against it
+#   --no-svt-av1  skip that without asking
+#   (neither)     ask
+set -euo pipefail
+
+repo="$(cd "$(dirname "$0")" && pwd)"
+list="$repo/system/packages.txt"
+
+svt_av1=ask
+for arg in "$@"; do
+    case "$arg" in
+        --svt-av1) svt_av1=yes ;;
+        --no-svt-av1) svt_av1=no ;;
+        *) echo "Unknown option: $arg" >&2; exit 1 ;;
+    esac
+done
+
+if (( EUID == 0 )); then
+    echo "Run this as your normal user, not root (it uses sudo where needed)." >&2
+    exit 1
+fi
+
+step() { printf '\n\033[1;34m==> %s\033[0m\n' "$*"; }
+
+# Prints the packages under a [section] of packages.txt, skipping comments
+packages() {
+    awk -v want="[$1]" '
+        /^\[/ { section = $1; next }
+        section == want { sub(/#.*/, ""); if (NF) print $1 }
+    ' "$list"
+}
+
+# --- System config -----------------------------------------------------------
+
+step "System config (pacman options)"
+"$repo/system/install.sh"
+
+step "Enabling multilib (needed for Steam and 32-bit drivers)"
+if ! grep -q '^\[multilib\]' /etc/pacman.conf; then
+    sudo sed -i '/^#\[multilib\]/,/^#Include/ s/^#//' /etc/pacman.conf
+fi
+sudo pacman -Syu --needed --noconfirm pciutils git base-devel
+
+# --- Hardware ----------------------------------------------------------------
+
+step "Detecting CPU and GPU"
+hw=()
+
+case "$(grep -m1 '^vendor_id' /proc/cpuinfo | awk '{print $3}')" in
+    AuthenticAMD) hw+=(amd-ucode); echo "CPU: AMD" ;;
+    GenuineIntel) hw+=(intel-ucode); echo "CPU: Intel" ;;
+    *) echo "CPU: unknown vendor, skipping microcode" ;;
+esac
+
+# Vendor column of every display controller, e.g. "NVIDIA Corporation"
+gpus="$(lspci -mm | awk -F'"' '$2 ~ /VGA|3D|Display/ { print $4 }')"
+if grep -q NVIDIA <<<"$gpus"; then
+    echo "GPU: NVIDIA"
+    # nvidia-open only ships modules for the stock `linux` kernel; any other
+    # kernel needs the DKMS build. Supports Turing (GTX 16xx / RTX 20xx) and newer.
+    if pacman -Qq linux-lts linux-zen linux-hardened >/dev/null 2>&1; then
+        hw+=(nvidia-open-dkms linux-headers)
+    else
+        hw+=(nvidia-open)
+    fi
+    hw+=(nvidia-utils lib32-nvidia-utils libva-nvidia-driver)
+fi
+if grep -q 'Advanced Micro Devices' <<<"$gpus"; then
+    echo "GPU: AMD"
+    hw+=(mesa lib32-mesa vulkan-radeon lib32-vulkan-radeon)
+fi
+if grep -q 'Intel Corporation' <<<"$gpus"; then
+    echo "GPU: Intel"
+    hw+=(mesa lib32-mesa vulkan-intel lib32-vulkan-intel intel-media-driver)
+fi
+
+# Installed before the main list so Steam's 32-bit Vulkan dependency is
+# already satisfied by the right driver
+if (( ${#hw[@]} )); then
+    sudo pacman -S --needed --noconfirm "${hw[@]}"
+fi
+
+# --- Packages ----------------------------------------------------------------
+
+step "Official repo packages"
+mapfile -t pkgs < <(packages pacman)
+sudo pacman -S --needed --noconfirm "${pkgs[@]}"
+
+step "yay (AUR helper)"
+if ! command -v yay >/dev/null; then
+    build="$(mktemp -d)"
+    git clone https://aur.archlinux.org/yay-bin.git "$build/yay-bin"
+    (cd "$build/yay-bin" && makepkg -si --noconfirm)
+    rm -rf "$build"
+else
+    echo "already installed"
+fi
+
+step "AUR packages"
+mapfile -t pkgs < <(packages aur)
+yay -S --needed --noconfirm "${pkgs[@]}"
+
+step "Flatpak apps"
+sudo flatpak remote-add --if-not-exists flathub https://dl.flathub.org/repo/flathub.flatpakrepo
+mapfile -t pkgs < <(packages flatpak)
+sudo flatpak install -y --noninteractive flathub "${pkgs[@]}"
+
+step "Apps from official install scripts"
+mkdir -p "$HOME/.local/bin"
+for app in $(packages installer); do
+    if command -v "$app" >/dev/null || [[ -x "$HOME/.local/bin/$app" ]]; then
+        echo "$app: already installed"
+        continue
+    fi
+    case "$app" in
+        claude) curl -fsSL https://claude.ai/install.sh | bash ;;
+        oh-my-posh) curl -fsSL https://ohmyposh.dev/install.sh | bash -s -- -d "$HOME/.local/bin" ;;
+        *) echo "$app: no install recipe in bootstrap.sh, skipping" >&2 ;;
+    esac
+done
+
+# --- Optional: SVT-AV1 essential + ffmpeg rebuild ----------------------------
+
+if [[ $svt_av1 == ask ]]; then
+    read -rp $'\nInstall svt-av1-essential-git and rebuild ffmpeg against it? (slow) [y/N] ' reply
+    [[ $reply == [yY]* ]] && svt_av1=yes || svt_av1=no
+fi
+if [[ $svt_av1 == yes ]]; then
+    step "svt-av1-essential-git"
+    # Interactive on purpose: pacman asks to replace the conflicting svt-av1,
+    # and --noconfirm would answer no
+    yay -S --needed svt-av1-essential-git
+    step "Rebuilding ffmpeg against svt-av1-essential-git"
+    "$repo/system/rebuild-ffmpeg.sh"
+fi
+
+# --- Services ----------------------------------------------------------------
+
+step "Enabling services"
+# Not started now: sddm would take over the screen mid-script. They come up on reboot.
+mapfile -t units < <(packages services)
+sudo systemctl enable "${units[@]}"
+
+# --- Dotfiles ----------------------------------------------------------------
+
+step "Linking dotfiles with stow"
+# Create real parent dirs first, otherwise stow symlinks the whole directory
+# (e.g. ~/.config) into the repo and every app's files end up in git
+mkdir -p "$HOME/.config" "$HOME/.local/bin" "$HOME/.local/share" "$HOME/Pictures"
+# Sunshine keeps credentials and logs beside its config; those must stay out of git
+mkdir -p "$HOME/.config/sunshine"
+mkdir -p -m 700 "$HOME/.ssh"
+if ! stow -d "$repo" -t "$HOME" --restow dotfiles; then
+    echo "stow hit conflicts (listed above). Move those files aside, then run:" >&2
+    echo "  stow -d \"$repo\" -t \"\$HOME\" dotfiles" >&2
+fi
+
+if [[ "$(getent passwd "$USER" | cut -d: -f7)" != */zsh ]]; then
+    step "Setting zsh as login shell"
+    chsh -s /usr/bin/zsh
+fi
+
+step "Done — reboot to load drivers and start Hyprland"

dotfiles/.config/environment.d/ssh-agent.conf

@@ -0,0 +1 @@
+SSH_AUTH_SOCK=${HOME}/.bitwarden-ssh-agent.sock

dotfiles/.config/foot/foot.ini

@@ -47,3 +47,11 @@ regular4=53BDFA  # blue
 regular5=FAE994  # magenta
 regular6=99faf2  # cyan
 regular7=C7C7C7  # white
+
+[key-bindings]
+clipboard-copy=Control+c XF86Copy
+clipboard-paste=Control+Shift+v XF86Paste
+
+[text-bindings]
+# Ctrl+C now copies, so send the interrupt signal (^C) from Ctrl+Shift+C instead
+\x03=Control+Shift+c

dotfiles/.config/gtk-3.0/bookmarks

@@ -3,5 +3,6 @@ file:///home/thomas/Documents
 file:///home/thomas/Downloads
 file:///home/thomas/Pictures
 file:///home/thomas/Music
+file:///home/thomas/Videos
 smb://192.168.1.84/media/
 smb://192.168.1.85/music/

dotfiles/.config/hypr/UserConfigs/ENVariables.conf

@@ -51,10 +51,10 @@ env = ELECTRON_OZONE_PLATFORM_HINT,auto # auto selects Wayland if possible, X11
 # This is from Hyprland Wiki. Below will be activated nvidia gpu detected
 # See hyprland wiki https://wiki.hyprland.org/Nvidia/#environment-variables
 
-#env = LIBVA_DRIVER_NAME,nvidia
-#env = __GLX_VENDOR_LIBRARY_NAME,nvidia
-#env = NVD_BACKEND,direct
-#env = GSK_RENDERER,ngl
+env = LIBVA_DRIVER_NAME,nvidia
+env = __GLX_VENDOR_LIBRARY_NAME,nvidia
+env = NVD_BACKEND,direct
+env = GSK_RENDERER,ngl
 
 # additional ENV's for nvidia. Caution, activate with care
 #env = GBM_BACKEND,nvidia-drm
@@ -87,3 +87,6 @@ env = ELECTRON_OZONE_PLATFORM_HINT,auto # auto selects Wayland if possible, X11
 # env = HYPRLAND_NO_RT,1 # Disables realtime priority setting by Hyprland.
 # env = HYPRLAND_NO_SD_NOTIFY,1 # If systemd, disables the 'sd_notify' calls.
 # env = HYPRLAND_NO_SD_VARS,1 # Disables management of variables in systemd and dbus activation environments.
+
+# Bitwarden SSH agent (so GUI apps like VS Code see it, not just shells)
+env = SSH_AUTH_SOCK,/home/thomas/.bitwarden-ssh-agent.sock

dotfiles/.config/hypr/UserConfigs/UserDecorations.conf

@@ -21,7 +21,7 @@ decoration {
   rounding = 10
          
   active_opacity = 1.0
-  inactive_opacity = 0.9
+  inactive_opacity = 1.0
   fullscreen_opacity = 1.0
 
   dim_inactive = true

dotfiles/.config/hypr/UserConfigs/monitors.conf

@@ -8,5 +8,5 @@
 # <<<<< TUI AUTO START
 monitor=desc:LG Electronics LG ULTRAWIDE 0x0002E68A,2560x1080@60.00000,1920x-740,1.00000000,transform,3,vrr,0
 monitor=desc:HP Inc. HP 524pf VNG447017D,1920x1080@100.00000,-1920x0,1.00000000,transform,0,vrr,0
-monitor=desc:Acer Technologies VG240Y S 0x126191DE,1920x1080@165.00301,0x0,1.00000000,transform,0,vrr,1,bitdepth,10,cm,wide
+monitor=desc:Acer Technologies VG240Y S 0x126191DE,1920x1080@165.00301,0x0,1.00000000,transform,0,vrr,0,bitdepth,10,cm,wide
 # <<<<< TUI AUTO END

dotfiles/.config/hypr/appearance/decorations.lua

@@ -24,7 +24,7 @@ hl.config({
         rounding = 10,
 
         active_opacity     = 1.0,
-        inactive_opacity    = 0.9,
+        inactive_opacity    = 1.0,
         fullscreen_opacity  = 1.0,
 
         dim_inactive = true,

dotfiles/.config/hypr/core/env.lua

@@ -49,10 +49,10 @@ hl.env("ELECTRON_OZONE_PLATFORM_HINT", "auto") -- auto selects Wayland if possib
 -- This is from the Hyprland wiki. Uncomment below if an nvidia GPU is detected.
 -- See hyprland wiki https://wiki.hyprland.org/Nvidia/#environment-variables
 
--- hl.env("LIBVA_DRIVER_NAME", "nvidia")
--- hl.env("__GLX_VENDOR_LIBRARY_NAME", "nvidia")
--- hl.env("NVD_BACKEND", "direct")
--- hl.env("GSK_RENDERER", "ngl")
+hl.env("LIBVA_DRIVER_NAME", "nvidia")
+hl.env("__GLX_VENDOR_LIBRARY_NAME", "nvidia")
+hl.env("NVD_BACKEND", "direct")
+hl.env("GSK_RENDERER", "ngl")
 
 -- additional ENV's for nvidia. Caution, activate with care
 -- hl.env("GBM_BACKEND", "nvidia-drm")
@@ -85,3 +85,6 @@ hl.env("ELECTRON_OZONE_PLATFORM_HINT", "auto") -- auto selects Wayland if possib
 -- hl.env("HYPRLAND_NO_RT", "1") -- Disables realtime priority setting by Hyprland.
 -- hl.env("HYPRLAND_NO_SD_NOTIFY", "1") -- If systemd, disables the 'sd_notify' calls.
 -- hl.env("HYPRLAND_NO_SD_VARS", "1") -- Disables management of variables in systemd and dbus activation environments.
+
+-- Bitwarden SSH agent (so GUI apps like VS Code see it, not just shells)
+hl.env("SSH_AUTH_SOCK", os.getenv("HOME") .. "/.bitwarden-ssh-agent.sock")

dotfiles/.config/hypr/core/hyprmod.lua

@@ -5,6 +5,11 @@
 -- whatever it last wrote. If you reinstall HyprMod, prefer letting its own "Migrate to Lua…"
 -- wizard take over managing this file instead of hand-editing it going forward.
 
+-- vrr forced off globally: the per-monitor vrr = 0 flag below does NOT override this when
+-- misc.vrr is 1 (tested live on Hyprland 0.56.2 — DP-2 stayed vrr:true until this global
+-- was changed). DP-2 (Acer VG240Y S) flickers under VRR when idle in fullscreen (mouse
+-- stationary -> no repaint damage -> frame delivery stalls near the panel's VRR floor).
+-- The other two monitors don't negotiate VRR at all, so this has no effect on them.
 hl.config({
     general = {
         allow_tearing = true,
@@ -13,17 +18,19 @@ hl.config({
         },
     },
     misc = {
-        vrr = 1,
+        vrr = 0,
     },
 })
 
 -- Monitors
-hl.monitor({ output = "DP-2", mode = "1920x1080@165.00Hz", position = "0x0", scale = 1, bitdepth = 10, cm = "wide" })
+hl.monitor({ output = "DP-2", mode = "1920x1080@165.00Hz", position = "0x0", scale = 1, bitdepth = 10, cm = "wide", vrr = 0 })
 
 -- Keybinds
 -- (unbind = SUPER SHIFT, Print / unbind = SUPER, up from the source .conf have no Lua equivalent needed —
 -- we just don't define a conflicting bind elsewhere; SUPER + up -> movefocus u below is otherwise identical
 -- to the one already in keybinds.lua, kept here too for parity with the original file)
-hl.bind("SUPER + Print", hl.dsp.exec_cmd("hyprshot -o " .. os.getenv("HOME") .. "/Pictures/Screenshots-Linux -m region"))
+hl.bind("SUPER + Print", hl.dsp.exec_cmd([[sh -c 'if command -v hyprshot >/dev/null; then hyprshot -o "$HOME/Pictures/Screenshots-Linux" -m region; else grim -g "$(slurp)" "$HOME/Pictures/Screenshots-Linux/$(date +%Y-%m-%d_%H-%M-%S).png" && notify-send "Screenshot saved"; fi']])) -- drag an area (hyprshot if installed, else grim/slurp)
+hl.bind("SUPER + SHIFT + S", hl.dsp.exec_cmd([[sh -c 'grim -g "$(slurp)" "$HOME/Pictures/Screenshots-Linux/$(date +%Y-%m-%d_%H-%M-%S).png" && notify-send "Screenshot saved"']])) -- region; Surface keyboard has no Print key
+hl.bind("SUPER + F6", hl.dsp.exec_cmd([[sh -c 'grim "$HOME/Pictures/Screenshots-Linux/$(date +%Y-%m-%d_%H-%M-%S).png" && notify-send "Screenshot saved"']])) -- full screen
 hl.bind("SUPER + up", hl.dsp.focus({ direction = "u" }))
-hl.bind("SUPER + SHIFT + Print", hl.dsp.exec_cmd("hyprshot -o " .. os.getenv("HOME") .. "/Pictures/Screenshots-Linux -m window"))
+hl.bind("SUPER + SHIFT + Print", hl.dsp.exec_cmd([[sh -c 'if command -v hyprshot >/dev/null; then hyprshot -o "$HOME/Pictures/Screenshots-Linux" -m window; else grim "$HOME/Pictures/Screenshots-Linux/$(date +%Y-%m-%d_%H-%M-%S).png" && notify-send "Screenshot saved"; fi']])) -- window (hyprshot) or full screen (fallback)

dotfiles/.config/hypr/core/startup.lua

@@ -13,9 +13,11 @@ hl.on("hyprland.start", function()
     -- Startup
     hl.exec_cmd("dbus-update-activation-environment --systemd WAYLAND_DISPLAY XDG_CURRENT_DESKTOP")
     hl.exec_cmd("systemctl --user import-environment WAYLAND_DISPLAY XDG_CURRENT_DESKTOP")
+    -- restart portals once the env is imported, otherwise screen sharing breaks
+    hl.exec_cmd("sleep 1 && systemctl --user restart xdg-desktop-portal-hyprland && systemctl --user restart xdg-desktop-portal")
 
-    -- Sunshine
-    hl.exec_cmd("sleep 1 && hyprctl output create headless")
+    -- Sunshine (virtual monitor only on desktop; skipped on laptops, detected by a system battery)
+    hl.exec_cmd("sleep 1 && ! ls -d /sys/class/power_supply/BAT* >/dev/null 2>&1 && hyprctl output create headless")
 
     -- Polkit (Polkit Gnome / KDE)
     hl.exec_cmd(scriptsDir .. "/Polkit.sh")
@@ -34,10 +36,11 @@ hl.on("hyprland.start", function()
     hl.exec_cmd("wl-paste --type image --watch cliphist store")
 
     -- Starting hypridle to start hyprlock
-    -- hl.exec_cmd("hypridle")
+    -- Sunshine streams hold an idle inhibitor (scripts/SunshineIdle.sh) so this never locks mid-stream
+    hl.exec_cmd("hypridle")
 
     -- Sunshine for streaming media
-    h1.exec_cmd("sunshine")
+    hl.exec_cmd("sunshine")
 
     -- Float + center the Bitwarden extension pop-out (window rules can't catch it — see the script)
     hl.exec_cmd(scriptsDir .. "/FloatBitwardenPopup.sh")
@@ -49,6 +52,7 @@ hl.on("hyprland.start", function()
     hl.exec_cmd("sleep 3 && vesktop")
     hl.dispatch(hl.dsp.focus({ workspace = 1 }))
     hl.exec_cmd("bitwarden-desktop --ozone-platform-hint=auto --silent")
+    hl.exec_cmd("seafile-applet")
 
     -- Here are a list of features available but disabled by default
     -- hl.exec_cmd("awww-daemon --format xrgb && awww img " .. os.getenv("HOME") .. "/Pictures/wallpapers/mecha-nostalgia.png") -- persistent wallpaper

dotfiles/.config/hypr/hyprland-gui.conf

@@ -2,10 +2,15 @@
 
 general:allow_tearing = 1
 general:snap:enabled = 0
-misc:vrr = 1
+# vrr forced off globally: the per-monitor vrr,0 flag below does NOT override this when
+# misc:vrr is 1 (tested live on Hyprland 0.56.2 — DP-2 stayed vrr:true until this global
+# was changed). DP-2 (Acer VG240Y S) flickers under VRR when idle in fullscreen (mouse
+# stationary -> no repaint damage -> frame delivery stalls near the panel's VRR floor).
+# The other two monitors don't negotiate VRR at all, so this has no effect on them.
+misc:vrr = 0
 
 # Monitors
-monitor = DP-2, 1920x1080@165.00Hz, 0x0, 1, bitdepth, 10, cm, wide
+monitor = DP-2, 1920x1080@165.00Hz, 0x0, 1, bitdepth, 10, cm, wide, vrr, 0
 
 # Keybinds
 unbind = SUPER SHIFT, Print

dotfiles/.config/hypr/input/keybinds.lua

@@ -116,23 +116,22 @@ hl.bind(mainMod .. " + SHIFT + tab", hl.dsp.focus({ workspace = "m-1" }))
 hl.bind(mainMod .. " + U",         hl.dsp.workspace.toggle_special("nyx"))
 hl.bind(mainMod .. " + SHIFT + U", hl.dsp.window.move({ workspace = "special:nyx" }))
 
--- The following mappings use key codes to better support various keyboard layouts
--- 1 is code:10, 2 is code:11, etc
+-- Number-row keys (the Lua bind parser does not accept the code:NN keycode syntax)
 -- Switch workspaces with mainMod + [0-9]
-for i, code in ipairs({ 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 }) do
-    hl.bind(mainMod .. " + code:" .. code, hl.dsp.focus({ workspace = i })) -- code:10 = key 1 ... code:19 = key 0
+for i, key in ipairs({ "1", "2", "3", "4", "5", "6", "7", "8", "9", "0" }) do
+    hl.bind(mainMod .. " + " .. key, hl.dsp.focus({ workspace = i }))
 end
 
 -- Move active window and follow to workspace mainMod + SHIFT + [0-9]
-for i, code in ipairs({ 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 }) do
-    hl.bind(mainMod .. " + SHIFT + code:" .. code, hl.dsp.window.move({ workspace = i, follow = true }))
+for i, key in ipairs({ "1", "2", "3", "4", "5", "6", "7", "8", "9", "0" }) do
+    hl.bind(mainMod .. " + SHIFT + " .. key, hl.dsp.window.move({ workspace = i, follow = true }))
 end
 hl.bind(mainMod .. " + SHIFT + bracketleft",  hl.dsp.window.move({ workspace = -1, follow = true })) -- brackets [
 hl.bind(mainMod .. " + SHIFT + bracketright", hl.dsp.window.move({ workspace = 1,  follow = true })) -- brackets ]
 
 -- Move active window to a workspace silently mainMod + CTRL + [0-9]
-for i, code in ipairs({ 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 }) do
-    hl.bind(mainMod .. " + CTRL + code:" .. code, hl.dsp.window.move({ workspace = i, follow = false }))
+for i, key in ipairs({ "1", "2", "3", "4", "5", "6", "7", "8", "9", "0" }) do
+    hl.bind(mainMod .. " + CTRL + " .. key, hl.dsp.window.move({ workspace = i, follow = false }))
 end
 hl.bind(mainMod .. " + CTRL + bracketleft",  hl.dsp.window.move({ workspace = -1, follow = false })) -- brackets [
 hl.bind(mainMod .. " + CTRL + bracketright", hl.dsp.window.move({ workspace = 1,  follow = false })) -- brackets ]

dotfiles/.config/hypr/layout/monitors.lua

@@ -10,6 +10,6 @@
 -- <<<<< TUI AUTO START
 hl.monitor({ output = "desc:LG Electronics LG ULTRAWIDE 0x0002E68A", mode = "2560x1080@60.00000", position = "1920x-740", scale = 1.00000000, transform = 3, vrr = 0 })
 hl.monitor({ output = "desc:HP Inc. HP 524pf VNG447017D",           mode = "1920x1080@100.00000", position = "-1920x0",   scale = 1.00000000, transform = 0, vrr = 0 })
-hl.monitor({ output = "desc:Acer Technologies VG240Y S 0x126191DE", mode = "1920x1080@165.00301", position = "0x0",       scale = 1.00000000, transform = 0, vrr = 1, bitdepth = 10, cm = "wide" })
+hl.monitor({ output = "desc:Acer Technologies VG240Y S 0x126191DE", mode = "1920x1080@165.00301", position = "0x0",       scale = 1.00000000, transform = 0, vrr = 0, bitdepth = 10, cm = "wide" })
 hl.monitor({ output = "HEADLESS-1", mode = "1728x1080@60.00000", position = "4480x0", scale = 1.00000000, transform = 0, vrr = 0 })
 -- <<<<< TUI AUTO END

dotfiles/.config/hypr/layout/windowrules.lua

@@ -137,8 +137,8 @@ hl.window_rule({ workspace = "3", match = { class = "^([Vv]esktop|[Dd]iscord|[Ss
 hl.window_rule({ size = "20% 20%", match = { class = "^([Pp]lexamp)" } })
 
 -- FLOAT
-hl.window_rule({ name = "windowrule-75", float = true, opacity = "0.9 0.7", size = "monitor_w*0.7 monitor_h*0.7", match = { tag = "wallpaper*" } })
-hl.window_rule({ name = "windowrule-76", float = true, opacity = "0.8 0.7", size = "monitor_w*0.7 monitor_h*0.7", match = { tag = "settings*" } })
+hl.window_rule({ name = "windowrule-75", float = true, opacity = "0.9 0.9", size = "monitor_w*0.7 monitor_h*0.7", match = { tag = "wallpaper*" } })
+hl.window_rule({ name = "windowrule-76", float = true, opacity = "0.8 0.8", size = "monitor_w*0.7 monitor_h*0.7", match = { tag = "settings*" } })
 hl.window_rule({ name = "windowrule-77", float = true, match = { tag = "viewer*" } })
 hl.window_rule({ name = "windowrule-78", float = true, match = { class = "([Zz]oom|onedriver|onedriver-launcher)$" } })
 hl.window_rule({ name = "windowrule-79", float = true, match = { class = "(org.gnome.Calculator)", title = "(Calculator)" } })
@@ -162,17 +162,17 @@ hl.window_rule({ name = "windowrule-92", float = true, center = true, size = "mo
 -- END of float popups and dialogue #######
 
 -- OPACITY
--- hl.window_rule({ opacity = "0.9 0.7", match = { tag = "browser*" } })
--- hl.window_rule({ opacity = "0.9 0.8", match = { tag = "projects*" } })
--- hl.window_rule({ opacity = "0.94 0.86", match = { tag = "im*" } })
--- hl.window_rule({ opacity = "0.94 0.86", match = { tag = "multimedia*" } })
--- hl.window_rule({ opacity = "0.9 0.8", match = { tag = "file-manager*" } })
-hl.window_rule({ name = "windowrule-93", opacity = "0.8 0.7", match = { tag = "terminal*" } })
--- hl.window_rule({ opacity = "0.82 0.75", match = { tag = "viewer*" } })
-hl.window_rule({ name = "windowrule-94", opacity = "0.8 0.7", match = { class = "^(gedit|org.gnome.TextEditor|mousepad)$" } })
-hl.window_rule({ name = "windowrule-95", opacity = "0.9 0.8", match = { class = "^(deluge)$" } })
-hl.window_rule({ name = "windowrule-96", opacity = "0.9 0.8", match = { class = "^(seahorse)$" } }) -- gnome-keyring gui
--- hl.window_rule({ opacity = "0.95 0.75", match = { title = "^(Picture-in-Picture)$" } })
+-- hl.window_rule({ opacity = "0.9 0.9", match = { tag = "browser*" } })
+-- hl.window_rule({ opacity = "0.9 0.9", match = { tag = "projects*" } })
+-- hl.window_rule({ opacity = "0.94 0.94", match = { tag = "im*" } })
+-- hl.window_rule({ opacity = "0.94 0.94", match = { tag = "multimedia*" } })
+-- hl.window_rule({ opacity = "0.9 0.9", match = { tag = "file-manager*" } })
+hl.window_rule({ name = "windowrule-93", opacity = "0.8 0.8", match = { tag = "terminal*" } })
+-- hl.window_rule({ opacity = "0.82 0.82", match = { tag = "viewer*" } })
+hl.window_rule({ name = "windowrule-94", opacity = "0.8 0.8", match = { class = "^(gedit|org.gnome.TextEditor|mousepad)$" } })
+hl.window_rule({ name = "windowrule-95", opacity = "0.9 0.9", match = { class = "^(deluge)$" } })
+hl.window_rule({ name = "windowrule-96", opacity = "0.9 0.9", match = { class = "^(seahorse)$" } }) -- gnome-keyring gui
+-- hl.window_rule({ opacity = "0.95 0.95", match = { title = "^(Picture-in-Picture)$" } })
 
 -- SIZE
 -- hl.window_rule({ size = "25% 25%", match = { title = "^(Firefox)$" } })

dotfiles/.config/hypr/scripts/MediaCtrl.sh

@@ -4,6 +4,11 @@
 
 music_icon="$HOME/.config/swaync/icons/music.png"
 
+# Use the app's own icon for known players
+case "$(playerctl metadata --format '{{playerName}}' 2>/dev/null)" in
+    Plexamp) music_icon="com.plexamp.Plexamp" ;;
+esac
+
 # Play the next track
 play_next() {
     playerctl next

dotfiles/.config/hypr/scripts/SunshineIdle.sh

@@ -0,0 +1,29 @@
+#!/bin/bash
+# Keeps hypridle from locking the screen while Sunshine is streaming.
+# Hooked up as Sunshine's global_prep_cmd, so it runs for every app:
+#   start -> hold a systemd idle inhibitor (hypridle respects these) and
+#            unlock hyprlock if the session was already locked
+#   stop  -> release the inhibitor so normal idle locking resumes
+
+pidfile="${XDG_RUNTIME_DIR:-/tmp}/sunshine-idle-inhibit.pid"
+
+case "$1" in
+    start)
+        if ! { [ -f "$pidfile" ] && kill -0 "$(cat "$pidfile")" 2>/dev/null; }; then
+            setsid systemd-inhibit --what=idle --who=Sunshine --why="Streaming" \
+                sleep infinity >/dev/null 2>&1 &
+            echo $! > "$pidfile"
+        fi
+        # SIGUSR1 tells hyprlock to unlock
+        pkill -USR1 -x hyprlock
+        ;;
+    stop)
+        [ -f "$pidfile" ] && kill "$(cat "$pidfile")" 2>/dev/null
+        rm -f "$pidfile"
+        ;;
+    *)
+        echo "Usage: $0 start|stop" >&2
+        exit 1
+        ;;
+esac
+exit 0

dotfiles/.config/hypr/scripts/Volume.sh

@@ -1,143 +1,37 @@
 #!/bin/bash
-# HyprFlux — https://github.com/ahmad9059/HyprFlux
-# Scripts for volume controls for audio and mic 
+# Volume controls for audio and mic via wpctl (PipeWire).
+# Quickshell's VolumeOsd watches PipeWire directly, so no notifications here.
 
-iDIR="$HOME/.config/swaync/icons"
-sDIR="$HOME/.config/hypr/scripts"
+SINK="@DEFAULT_AUDIO_SINK@"
+SOURCE="@DEFAULT_AUDIO_SOURCE@"
+STEP="5%"
 
-# Get Volume
+# Print volume as an integer percent, or "Muted"
 get_volume() {
-    volume=$(pamixer --get-volume)
-    if [[ "$volume" -eq "0" ]]; then
+    local out
+    out=$(wpctl get-volume "$1")
+    if [[ "$out" == *MUTED* ]]; then
         echo "Muted"
     else
-        echo "$volume %"
+        awk '{ printf "%d %%\n", $2 * 100 + 0.5 }' <<< "$out"
     fi
 }
 
-# Get icons
-get_icon() {
-    current=$(get_volume)
-    if [[ "$current" == "Muted" ]]; then
-        echo "$iDIR/volume-mute.png"
-    elif [[ "${current%\%}" -le 30 ]]; then
-        echo "$iDIR/volume-low.png"
-    elif [[ "${current%\%}" -le 60 ]]; then
-        echo "$iDIR/volume-mid.png"
-    else
-        echo "$iDIR/volume-high.png"
-    fi
+is_muted() {
+    [[ "$(wpctl get-volume "$1")" == *MUTED* ]]
 }
 
-# Notify
-notify_user() {
-    if [[ "$(get_volume)" == "Muted" ]]; then
-        notify-send -e -h string:x-canonical-private-synchronous:volume_notif -h boolean:SWAYNC_BYPASS_DND:true -u low -i "$(get_icon)" " Volume:" " Muted"
-    else
-        notify-send -e -h int:value:"$(get_volume | sed 's/%//')" -h string:x-canonical-private-synchronous:volume_notif -h boolean:SWAYNC_BYPASS_DND:true -u low -i "$(get_icon)" " Volume Level:" " $(get_volume)" &&
-        "$sDIR/Sounds.sh" --volume
-    fi
-}
+# Raising/lowering while muted unmutes first, matching the old behaviour
+inc() { is_muted "$1" && wpctl set-mute "$1" 0 || wpctl set-volume -l 1.0 "$1" "$STEP+"; }
+dec() { is_muted "$1" && wpctl set-mute "$1" 0 || wpctl set-volume "$1" "$STEP-"; }
 
-# Increase Volume
-inc_volume() {
-    if [ "$(pamixer --get-mute)" == "true" ]; then
-        toggle_mute
-    else
-        pamixer -i 5 --allow-boost --set-limit 150 && notify_user
-    fi
-}
-
-# Decrease Volume
-dec_volume() {
-    if [ "$(pamixer --get-mute)" == "true" ]; then
-        toggle_mute
-    else
-        pamixer -d 5 && notify_user
-    fi
-}
-
-# Toggle Mute
-toggle_mute() {
-	if [ "$(pamixer --get-mute)" == "false" ]; then
-		pamixer -m && notify-send -e -u low -h boolean:SWAYNC_BYPASS_DND:true -i "$iDIR/volume-mute.png" " Mute"
-	elif [ "$(pamixer --get-mute)" == "true" ]; then
-		pamixer -u && notify-send -e -u low -h boolean:SWAYNC_BYPASS_DND:true -i "$(get_icon)" " Volume:" " Switched ON"
-	fi
-}
-
-# Toggle Mic
-toggle_mic() {
-	if [ "$(pamixer --default-source --get-mute)" == "false" ]; then
-		pamixer --default-source -m && notify-send -e -u low -h boolean:SWAYNC_BYPASS_DND:true -i "$iDIR/microphone-mute.png" " Microphone:" " Switched OFF"
-	elif [ "$(pamixer --default-source --get-mute)" == "true" ]; then
-		pamixer -u --default-source u && notify-send -e -u low -h boolean:SWAYNC_BYPASS_DND:true -i "$iDIR/microphone.png" " Microphone:" " Switched ON"
-	fi
-}
-# Get Mic Icon
-get_mic_icon() {
-    current=$(pamixer --default-source --get-volume)
-    if [[ "$current" -eq "0" ]]; then
-        echo "$iDIR/microphone-mute.png"
-    else
-        echo "$iDIR/microphone.png"
-    fi
-}
-
-# Get Microphone Volume
-get_mic_volume() {
-    volume=$(pamixer --default-source --get-volume)
-    if [[ "$volume" -eq "0" ]]; then
-        echo "Muted"
-    else
-        echo "$volume %"
-    fi
-}
-
-# Notify for Microphone
-notify_mic_user() {
-    volume=$(get_mic_volume)
-    icon=$(get_mic_icon)
-    notify-send -e -h int:value:"$volume" -h "string:x-canonical-private-synchronous:volume_notif" -h boolean:SWAYNC_BYPASS_DND:true -u low -i "$icon"  " Mic Level:" " $volume"
-}
-
-# Increase MIC Volume
-inc_mic_volume() {
-    if [ "$(pamixer --default-source --get-mute)" == "true" ]; then
-        toggle_mic
-    else
-        pamixer --default-source -i 5 && notify_mic_user
-    fi
-}
-
-# Decrease MIC Volume
-dec_mic_volume() {
-    if [ "$(pamixer --default-source --get-mute)" == "true" ]; then
-        toggle-mic
-    else
-        pamixer --default-source -d 5 && notify_mic_user
-    fi
-}
-
-# Execute accordingly
-if [[ "$1" == "--get" ]]; then
-	get_volume
-elif [[ "$1" == "--inc" ]]; then
-	inc_volume
-elif [[ "$1" == "--dec" ]]; then
-	dec_volume
-elif [[ "$1" == "--toggle" ]]; then
-	toggle_mute
-elif [[ "$1" == "--toggle-mic" ]]; then
-	toggle_mic
-elif [[ "$1" == "--get-icon" ]]; then
-	get_icon
-elif [[ "$1" == "--get-mic-icon" ]]; then
-	get_mic_icon
-elif [[ "$1" == "--mic-inc" ]]; then
-	inc_mic_volume
-elif [[ "$1" == "--mic-dec" ]]; then
-	dec_mic_volume
-else
-	get_volume
-fi
+case "$1" in
+    --inc)        inc "$SINK" ;;
+    --dec)        dec "$SINK" ;;
+    --toggle)     wpctl set-mute "$SINK" toggle ;;
+    --toggle-mic) wpctl set-mute "$SOURCE" toggle ;;
+    --mic-inc)    inc "$SOURCE" ;;
+    --mic-dec)    dec "$SOURCE" ;;
+    --get-mic)    get_volume "$SOURCE" ;;
+    *)            get_volume "$SINK" ;;
+esac

dotfiles/.config/orbit/theme.toml

@@ -1,5 +0,0 @@
-accent_primary = "#007acc"
-accent_secondary = "#06b6d4"
-background = "#1e1e1e"
-foreground = "#d4d4d8"
-opacity = 0.91

dotfiles/.config/quickshell/config/VpnExclusivity.qml

@@ -1,16 +1,17 @@
 pragma Singleton
 import QtQuick
 
-// Tailscale, Mullvad, and ProtonVPN all fight over the default route/DNS if
-// more than one is active at once (see VpnIndicator.qml's header comment) —
-// only one of the three should ever actually be connected. This singleton
-// is the shared signal between the two widget files: VpnIndicator.qml
-// writes Mullvad/ProtonVPN's live connection state here as it polls them;
-// TailscaleIndicator.qml reads it to back off (`tailscale down`) rather
-// than stay up alongside either one, and to refuse turning Tailscale back
-// on while one is still connected.
+// Tailscale, Mullvad, ProtonVPN, and the home UniFi WireGuard tunnel all
+// fight over the default route/DNS if more than one is active at once (see
+// VpnIndicator.qml's header comment) — only one should ever actually be
+// connected. This singleton is the shared signal between the two widget
+// files: VpnIndicator.qml writes each tunnel's live connection state here
+// as it polls them; TailscaleIndicator.qml reads it to back off (`tailscale
+// down`) rather than stay up alongside one, and to refuse turning Tailscale
+// back on while one is still connected.
 QtObject {
     property bool mullvadConnected: false
     property bool protonConnected: false
-    readonly property bool commercialVpnActive: mullvadConnected || protonConnected
+    property bool homeWgConnected: false
+    readonly property bool commercialVpnActive: mullvadConnected || protonConnected || homeWgConnected
 }

dotfiles/.config/quickshell/modules/bar/NetworkIndicator.qml

@@ -222,6 +222,82 @@ Item {
         root.passwordSsid = ""
     }
 
+    // --- Captive portal ---------------------------------------------------
+    // NetworkManager tells "portal" (a walled-garden sign-in page sits
+    // between us and the real internet) apart from "full" connectivity only
+    // via an active probe — nmcli's cached CONNECTIVITY field just reflects
+    // NM's own internal check, which runs every few minutes and is far too
+    // slow to catch a portal right after joining a network. So this forces a
+    // fresh probe itself, same shell-out approach as the stats below, and
+    // runs it whenever we're connected — not gated to panel.visible like
+    // those — since the whole point is noticing this before the popup is
+    // ever opened.
+    //
+    // "limited" is treated the same as "portal", not just "full" vs.
+    // everything-else: NM only reports "portal" when the probe request
+    // actually comes back *different* (redirected/rewritten) from what it
+    // expected. Plenty of real captive portals instead black-hole every
+    // request that isn't to their own login domain, so the probe just times
+    // out — which is also why this is slow to resolve — and NM reports
+    // "limited" (it got a route/gateway, but the internet check itself
+    // never landed) rather than "portal". From the user's side both look
+    // identical: connected, but no real internet.
+    property string connectivityState: "unknown"
+    readonly property bool connectivityRestricted: root.connectivityState === "portal" || root.connectivityState === "limited"
+
+    // A plain, unencrypted HTTP page whose only job is to be interceptable
+    // by a captive portal's redirect. An https:// URL mostly just gets
+    // silently blocked instead of redirected, which looks identical to the
+    // portal not existing at all.
+    readonly property string captivePortalCheckUrl: "http://neverssl.com/"
+
+    // Auto-opened once per network join (mirrors TailscaleIndicator's
+    // openAuthUrl/_authUrlOpened) so flapping connectivity on the same
+    // network doesn't keep popping a new browser tab — the manual "Open"
+    // button in the panel banner below still works regardless.
+    property bool _portalAutoOpened: false
+    property bool _wasConnected: false
+    onConnectedDeviceChanged: {
+        const isConnected = root.connectedDevice !== null
+        if (isConnected && !root._wasConnected) {
+            root._portalAutoOpened = false
+            root.connectivityState = "unknown"
+        }
+        root._wasConnected = isConnected
+    }
+
+    onConnectivityRestrictedChanged: {
+        if (root.connectivityRestricted && !root._portalAutoOpened)
+            root.openCaptivePortal()
+    }
+
+    function openCaptivePortal() {
+        root._portalAutoOpened = true
+        Qt.openUrlExternally(root.captivePortalCheckUrl)
+    }
+
+    Process {
+        id: connectivityProc
+        command: ["nmcli", "networking", "connectivity", "check"]
+        stdout: StdioCollector {
+            id: connectivityCollector
+            onStreamFinished: root.connectivityState = connectivityCollector.text.trim()
+        }
+    }
+
+    Timer {
+        id: connectivityTimer
+        // Poll quickly while things are still unresolved (fresh join, or an
+        // active portal we're waiting to clear) and back off once
+        // connectivity is confirmed full, rather than shelling out every
+        // few seconds forever for no reason.
+        interval: root.connectivityState === "full" ? 20000 : 3000
+        repeat: true
+        triggeredOnStart: true
+        running: root.connectedDevice !== null
+        onTriggered: if (!connectivityProc.running) connectivityProc.running = true
+    }
+
     // --- Live stats --------------------------------------------------
     // None of this comes from Quickshell's Networking API — it only knows
     // about devices/networks, not throughput, ping, or routing. So this
@@ -595,6 +671,34 @@ Item {
         }
     }
 
+    // Small warning badge over the icon's corner when the connection looks
+    // restricted (a captive portal, confirmed or just suspected — see
+    // connectivityRestricted above) — same treatment as TailscaleIndicator's
+    // login-needed badge, so "this needs your attention" reads the same way
+    // across indicators.
+    Rectangle {
+        visible: root.connectivityRestricted
+        width: Math.max(7, label.font.pixelSize * 0.42)
+        height: width
+        radius: width / 2
+        color: Colors.urgent
+        border.color: Colors.surface
+        border.width: 1
+        anchors.right: label.right
+        anchors.bottom: label.bottom
+        anchors.rightMargin: -1
+        anchors.bottomMargin: -1
+
+        Text {
+            anchors.centerIn: parent
+            text: "!"
+            color: Colors.surface
+            font.family: Appearance.fontFamily
+            font.pixelSize: Math.max(6, parent.height * 0.75)
+            font.bold: true
+        }
+    }
+
     MouseArea {
         anchors.fill: parent
         cursorShape: Qt.PointingHandCursor
@@ -890,6 +994,88 @@ Item {
 
                 }
 
+                // Captive portal banner — shown when the connectivity probe
+                // above finds either a confirmed sign-in page or a
+                // "limited" result standing between this network and the
+                // real internet (see connectivityRestricted). openCaptivePortal()
+                // already fired once automatically when this was first
+                // detected; this stays up as a manual retry in case that tab
+                // got closed.
+                Rectangle {
+                    width: parent.width
+                    visible: root.connectivityRestricted
+                    radius: 0
+                    color: Qt.rgba(Colors.urgent.r, Colors.urgent.g, Colors.urgent.b, 0.18)
+                    border.color: Colors.urgent
+                    border.width: 1
+                    implicitHeight: portalBannerRow.implicitHeight + 12
+
+                    RowLayout {
+                        id: portalBannerRow
+                        anchors.fill: parent
+                        anchors.margins: 6
+                        spacing: 8
+
+                        Text {
+                            text: "lock_open"
+                            font.family: Appearance.iconFontFamilyRounded
+                            font.variableAxes: Appearance.iconFontAxes
+                            font.pixelSize: 16
+                            color: Colors.urgent
+                        }
+
+                        ColumnLayout {
+                            Layout.fillWidth: true
+                            spacing: 0
+
+                            Text {
+                                Layout.fillWidth: true
+                                text: root.connectivityState === "portal" ? "Sign-in required" : "No internet access"
+                                elide: Text.ElideRight
+                                font.family: Appearance.fontFamily
+                                font.pixelSize: Appearance.fontSize
+                                font.bold: true
+                                color: Colors.foreground
+                            }
+                            Text {
+                                Layout.fillWidth: true
+                                text: root.connectivityState === "portal"
+                                    ? "This network needs a web sign-in first"
+                                    : "This network may need a web sign-in first"
+                                elide: Text.ElideRight
+                                font.family: Appearance.fontFamily
+                                font.pixelSize: Appearance.fontSizeSmall
+                                color: Colors.muted
+                            }
+                        }
+
+                        Rectangle {
+                            implicitWidth: openPortalText.implicitWidth + 16
+                            implicitHeight: 24
+                            radius: 0
+                            color: openPortalMouse.containsMouse ? Colors.urgent : "transparent"
+                            border.color: Colors.urgent
+                            border.width: 1
+
+                            Text {
+                                id: openPortalText
+                                anchors.centerIn: parent
+                                text: "Open"
+                                font.family: Appearance.fontFamily
+                                font.pixelSize: Appearance.fontSizeSmall
+                                color: openPortalMouse.containsMouse ? Colors.primaryText : Colors.urgent
+                            }
+                            MouseArea {
+                                id: openPortalMouse
+                                anchors.fill: parent
+                                hoverEnabled: true
+                                cursorShape: Qt.PointingHandCursor
+                                onClicked: root.openCaptivePortal()
+                            }
+                        }
+                    }
+                }
+
                 // Live stats — ping/loss/throughput/IP/gateway for whichever
                 // device is currently connected.
                 GridLayout {

dotfiles/.config/quickshell/modules/bar/PinnedTray.qml

@@ -20,12 +20,19 @@ RowLayout {
             launch: ["bitwarden"],
             secondary: ["pkill", "bitwarden"]
         },
+        {
+            name: "Seafile",
+            icon: "seafile",
+            binary: "seafile-applet",
+            launch: ["seafile-applet"],
+            secondary: ["pkill", "seafile-applet"]
+        },
         {
             name: "Sunshine",
             icon: Qt.resolvedUrl("../../assets/sunshine.svg"),
             binary: "sunshine",
             launch: ["systemctl", "--user", "start", "app-dev.lizardbyte.app.Sunshine.service"],
-            secondary: ["xdg-open", "https://xol.twhomelab.local:47990"],
+            secondary: ["xdg-open", "https://xol.twhomelab.tailnet:47990"],
         },
     ]
 

dotfiles/.config/quickshell/modules/bar/SystemUpdate.qml

@@ -4,22 +4,12 @@ import Quickshell
 import Quickshell.Hyprland
 import "../../config"
 
-// Package update indicator — replaces the old waybar custom/updater module
-// (see .config/waybar/config and its scripts/update-distro.sh). The actual
-// polling/state lives in the SystemUpdates singleton (config/), shared
-// across every monitor's bar; this is just the icon + panel UI. Clicking
-// opens a panel showing the pending count with a button that runs the
-// actual update in a terminal (scripts/update-system.sh, ported from the
-// same waybar script, distro-detection and all).
 Item {
     id: root
-    implicitWidth: row.implicitWidth + 2
+    implicitWidth: row.implicitWidth + 6
     implicitHeight: Appearance.barHeight
 
-    // The bar's own PanelWindow — same barWindow-anchoring convention as
-    // every other popup-having module here (Volume.qml, PowerButton.qml,
-    // etc.), so the panel opens in a fixed spot rather than following this
-    // icon's exact position in its RowLayout.
+    
     required property var barWindow
 
     RowLayout {
@@ -29,17 +19,10 @@ Item {
 
         Text {
             id: label
-            // Nerd Font glyph (package-variant) normally, matching the old
-            // waybar custom/updater module's icon — not a Material Symbols
-            // ligature name like the rest of this bar, so it needs the Nerd
-            // Font instead of iconFontFamilyRounded. While a check is running
-            // (the periodic poll or a right-click-triggered refresh) this
-            // swaps to the same spinner glyph/animation as
-            // BluetoothIndicator.qml's scan spinner.
             font.family: SystemUpdates.checking ? Appearance.iconFontFamilyRounded : Appearance.fontFamily
             font.variableAxes: Appearance.iconFontAxes
             font.pixelSize: SystemUpdates.checking ? 15 : 22
-            color: SystemUpdates.updateCount > 0 ? Colors.primary : Colors.foreground
+            color: Colors.foreground
             text: SystemUpdates.checking ? "progress_activity" : "󰏖"
 
             RotationAnimation on rotation {
@@ -48,9 +31,6 @@ Item {
                 from: 0
                 to: 360
                 duration: 900
-                // Otherwise the icon is left tilted at whatever angle the
-                // spin stopped on once checking finishes and it swaps back
-                // to the static glyph.
                 onRunningChanged: if (!running) label.rotation = 0
             }
         }
@@ -81,9 +61,6 @@ Item {
         id: panel
         visible: false
         color: "transparent"
-        // Same contentWidth/contentPadding split as the other panels
-        // (Volume.qml, PowerButton.qml, etc.) rather than a single magic
-        // implicitWidth.
         readonly property int contentWidth: 200
         readonly property int contentPadding: 16
         implicitWidth: contentWidth + contentPadding * 2
@@ -91,11 +68,6 @@ Item {
 
         anchor {
             window: root.barWindow
-            // Unlike anchor.item, anchor.window doesn't default rect to the
-            // window's own bounds — set it explicitly so edges/gravity below
-            // resolve against the full bar. Bottom alone (no Left/Right)
-            // anchors to the bar's bottom-center, which lines up with this
-            // icon since it sits in the bar's centered RowLayout.
             rect.x: 0
             rect.y: 0
             rect.width: root.barWindow.width
@@ -159,10 +131,6 @@ Item {
                     }
                 }
 
-                // Same selectable-row shape as this project's other panel
-                // actions (e.g. PowerButton.qml's menu entries): radius 0,
-                // fixed-width icon column, fillWidth label, offset hover
-                // halo rather than one drawn on the row's own edge.
                 Rectangle {
                     id: updateBtn
                     width: parent.width

dotfiles/.config/quickshell/modules/bar/TailscaleIndicator.qml

@@ -54,7 +54,7 @@ Item {
 
     // Set when the VPN-exclusivity guard (below) forces Tailscale down —
     // as opposed to you turning it off yourself — so it knows to bring
-    // Tailscale back up automatically once Mullvad/ProtonVPN disconnect,
+    // Tailscale back up automatically once the other VPN disconnects,
     // without overriding a deliberate manual "off".
     property bool _forcedDownByVpn: false
 
@@ -204,7 +204,7 @@ Item {
             return
         }
         if (VpnExclusivity.commercialVpnActive) {
-            root.actionStatus = "Disconnect Mullvad/ProtonVPN first"
+            root.actionStatus = "Disconnect the active VPN first"
             actionStatusTimer.restart()
             return
         }

dotfiles/.config/quickshell/modules/bar/Volume.qml

@@ -137,15 +137,25 @@ Item {
     MouseArea {
         anchors.fill: parent
         cursorShape: Qt.PointingHandCursor
+        // Scroll distance is accumulated rather than stepping per event:
+        // a mouse wheel sends one 120-unit event per notch, but a touchpad
+        // sends a stream of tiny events, which at a fixed step per event
+        // made touchpad scrolling far too fast. One notch's worth (120) of
+        // scrolling = one volume step, regardless of input device.
+        property real wheelAccum: 0
+        readonly property real volumeStep: 0.05
+        readonly property real unitsPerStep: 120
         onClicked: {
             panel.visible = !panel.visible
             grab.active = panel.visible
         }
         onWheel: (wheel) => {
             if (!root.sink || !root.sink.audio) return
-            const step = 0.05
-            const delta = wheel.angleDelta.y > 0 ? step : -step
-            root.sink.audio.volume = Math.max(0, Math.min(1, root.sink.audio.volume + delta))
+            wheelAccum += wheel.angleDelta.y
+            const steps = Math.trunc(wheelAccum / unitsPerStep)
+            if (steps === 0) return
+            wheelAccum -= steps * unitsPerStep
+            root.sink.audio.volume = Math.max(0, Math.min(1, root.sink.audio.volume + steps * volumeStep))
         }
     }
 

dotfiles/.config/quickshell/modules/bar/VpnIndicator.qml

@@ -18,6 +18,11 @@ import "../../config"
 //   - ProtonVPN: official `protonvpn` CLI (proton-vpn-cli package), plain-
 //     text status only — parsed defensively since its exact wording isn't
 //     guaranteed across versions.
+//   - Home (UniFi): the UniFi gateway's built-in WireGuard server, driven
+//     through a NetworkManager profile via `nmcli` (no sudo needed). The
+//     row's "Add config" button imports the client .conf UniFi generates
+//     (via scripts/ImportUnifiWireguard.sh --pick), which names the profile
+//     to match homeWgConnection below.
 Item {
     id: root
     implicitWidth: label.implicitWidth + 4
@@ -39,9 +44,17 @@ Item {
     property string protonState: "disconnected"
     property string protonDetail: ""
 
-    readonly property bool anyConnected: mullvadState === "connected" || protonState === "connected"
+    // NetworkManager profile name for the home UniFi WireGuard tunnel.
+    // "Installed" here means the profile exists — `nmcli connection show`
+    // exits non-zero for an unknown name.
+    property string homeWgConnection: "unifi-home"
+    property bool homeWgInstalled: true
+    property string homeWgState: "disconnected"
+    property string homeWgDetail: ""
 
-    // Set while switching from one provider to the other: holds which one
+    readonly property bool anyConnected: mullvadState === "connected" || protonState === "connected" || homeWgState === "connected"
+
+    // Set while switching from one provider to another: holds which one
     // to connect once the current one has finished disconnecting.
     property string pendingConnect: ""
 
@@ -51,6 +64,11 @@ Item {
     // show up hanging under the other's row.
     property string mullvadActionStatus: ""
     property string protonActionStatus: ""
+    property string homeWgActionStatus: ""
+    property bool homeWgImporting: homeWgImportProc.running
+    // Whether Home's options (Replace config) are expanded — kept across
+    // panel opens, like mullvadOptionsOpen.
+    property bool homeWgOptionsOpen: false
 
     // --- Mullvad advanced options (auto-connect, relay location, multihop) --
     // ProtonVPN's CLI is plain-text-only and far less predictable across
@@ -114,6 +132,20 @@ Item {
         VpnExclusivity.protonConnected = root.protonState === "connected"
     }
 
+    // `nmcli -g GENERAL.STATE,IP4.ADDRESS connection show <name>` prints
+    // nothing for an inactive profile, otherwise "activated"/"activating"/
+    // "deactivating" followed by the tunnel address(es).
+    function applyHomeWgStatus(text) {
+        const lines = String(text || "").trim().split("\n").map(function(l) { return l.trim() }).filter(Boolean)
+        const raw = (lines[0] || "").toLowerCase()
+        root.homeWgState = raw === "activated" ? "connected"
+            : raw === "activating" ? "connecting"
+            : raw === "deactivating" ? "disconnecting"
+            : "disconnected"
+        root.homeWgDetail = root.homeWgState === "connected" && lines[1] ? lines[1].split(" | ")[0] : ""
+        VpnExclusivity.homeWgConnected = root.homeWgState === "connected"
+    }
+
     function applyMullvadAutoConnect(text) {
         const m = String(text || "").match(/autoconnect:\s*(on|off)/i)
         root.mullvadAutoConnect = !!m && m[1].toLowerCase() === "on"
@@ -225,33 +257,61 @@ Item {
         }
     }
 
+    function refreshHomeWg() {
+        if (!homeWgStatusProc.running) homeWgStatusProc.running = true
+    }
+
     function refresh() {
         root.refreshMullvad()
         root.refreshProton()
+        root.refreshHomeWg()
+    }
+
+    // Disconnects every provider other than `keep` that isn't already
+    // down; returns whether it had to, so the caller can defer its own
+    // connect to root.resumePendingConnect() instead of racing it.
+    function stopOthers(keep) {
+        let stopping = false
+        if (keep !== "mullvad" && root.mullvadState !== "disconnected") { root.disconnectMullvad(); stopping = true }
+        if (keep !== "protonvpn" && root.protonState !== "disconnected") { root.disconnectProton(); stopping = true }
+        if (keep !== "homewg" && root.homeWgState !== "disconnected") { root.disconnectHomeWg(); stopping = true }
+        return stopping
+    }
+
+    // Called from each disconnect's onExited. The provider that just went
+    // down is marked disconnected optimistically before this runs — its
+    // status poll is async, and without that the pending connect would see
+    // it still "connected" and try to disconnect it all over again.
+    function resumePendingConnect() {
+        const next = root.pendingConnect
+        root.pendingConnect = ""
+        if (next === "mullvad") root.connectMullvad()
+        else if (next === "protonvpn") root.connectProton()
+        else if (next === "homewg") root.connectHomeWg()
     }
 
     function connectMullvad() {
         if (mullvadConnectProc.running || mullvadDisconnectProc.running) return
-        if (root.protonState !== "disconnected") {
-            root.pendingConnect = "mullvad"
-            root.disconnectProton()
-            return
-        }
+        if (root.stopOthers("mullvad")) { root.pendingConnect = "mullvad"; return }
         root.pendingConnect = ""
         mullvadConnectProc.running = true
     }
 
     function connectProton() {
         if (protonConnectProc.running || protonDisconnectProc.running) return
-        if (root.mullvadState !== "disconnected") {
-            root.pendingConnect = "protonvpn"
-            root.disconnectMullvad()
-            return
-        }
+        if (root.stopOthers("protonvpn")) { root.pendingConnect = "protonvpn"; return }
         root.pendingConnect = ""
         protonConnectProc.running = true
     }
 
+    function connectHomeWg() {
+        if (homeWgConnectProc.running || homeWgDisconnectProc.running) return
+        if (root.stopOthers("homewg")) { root.pendingConnect = "homewg"; return }
+        root.pendingConnect = ""
+        root.homeWgState = "connecting"
+        homeWgConnectProc.running = true
+    }
+
     function disconnectMullvad() {
         if (mullvadDisconnectProc.running) return
         mullvadDisconnectProc.running = true
@@ -262,6 +322,12 @@ Item {
         protonDisconnectProc.running = true
     }
 
+    function disconnectHomeWg() {
+        if (homeWgDisconnectProc.running) return
+        root.homeWgState = "disconnecting"
+        homeWgDisconnectProc.running = true
+    }
+
     function toggleMullvad() {
         if (mullvadConnectProc.running || mullvadDisconnectProc.running) return
         if (root.mullvadState === "connected") root.disconnectMullvad()
@@ -274,7 +340,23 @@ Item {
         else root.connectProton()
     }
 
-    // Tailscale fights Mullvad/ProtonVPN for the default route/DNS, so fire
+    // Opens a file chooser for the UniFi client .conf and imports it as
+    // homeWgConnection, replacing any existing profile. The chooser takes
+    // focus, which clears the focus grab and closes the panel — so the
+    // import reopens it when done to show the result.
+    function importHomeWgConfig() {
+        if (homeWgImportProc.running || root.homeWgState !== "disconnected") return
+        root.homeWgActionStatus = ""
+        homeWgImportProc.running = true
+    }
+
+    function toggleHomeWg() {
+        if (homeWgConnectProc.running || homeWgDisconnectProc.running) return
+        if (root.homeWgState === "connected") root.disconnectHomeWg()
+        else root.connectHomeWg()
+    }
+
+    // Tailscale fights Mullvad/ProtonVPN/home WireGuard for the default route/DNS, so fire
     // this right after either one finishes connecting — a harmless no-op
     // if Tailscale was already down. TailscaleIndicator.qml also backs
     // itself off reactively (via VpnExclusivity) as a backstop, but doing
@@ -336,10 +418,11 @@ Item {
             if (exitCode !== 0) {
                 root.mullvadActionStatus = root.shortLine(mullvadDisconnectErr.text || "Disconnect failed")
                 mullvadActionStatusTimer.restart()
+            } else {
+                root.mullvadState = "disconnected"
             }
             root.refreshMullvad()
-            if (root.pendingConnect === "mullvad") { root.pendingConnect = ""; root.connectMullvad() }
-            else if (root.pendingConnect === "protonvpn") { root.pendingConnect = ""; root.connectProton() }
+            root.resumePendingConnect()
         }
     }
 
@@ -471,10 +554,11 @@ Item {
             if (exitCode !== 0) {
                 root.protonActionStatus = root.shortLine(protonDisconnectErr.text || "Disconnect failed")
                 protonActionStatusTimer.restart()
+            } else {
+                root.protonState = "disconnected"
             }
             root.refreshProton()
-            if (root.pendingConnect === "mullvad") { root.pendingConnect = ""; root.connectMullvad() }
-            else if (root.pendingConnect === "protonvpn") { root.pendingConnect = ""; root.connectProton() }
+            root.resumePendingConnect()
         }
     }
 
@@ -485,6 +569,75 @@ Item {
         onTriggered: if (protonStatusProc.running) protonStatusProc.running = false
     }
 
+    // --- Home WireGuard (UniFi, via NetworkManager) ------------------------
+
+    Process {
+        id: homeWgStatusProc
+        command: ["nmcli", "-g", "GENERAL.STATE,IP4.ADDRESS", "connection", "show", root.homeWgConnection]
+        stdout: StdioCollector {
+            id: homeWgStatusCollector
+            onStreamFinished: root.applyHomeWgStatus(homeWgStatusCollector.text)
+        }
+        onExited: (exitCode, exitStatus) => {
+            root.homeWgInstalled = exitCode === 0
+            if (!root.homeWgInstalled) root.applyHomeWgStatus("")
+        }
+    }
+
+    // `connection up` blocks until NetworkManager reports the profile
+    // activated (or gives up), so its exit code is the real result. Note
+    // WireGuard "activated" only means the interface is configured — the
+    // handshake itself happens lazily on first traffic.
+    Process {
+        id: homeWgConnectProc
+        command: ["nmcli", "connection", "up", root.homeWgConnection]
+        stdout: StdioCollector {}
+        stderr: StdioCollector { id: homeWgConnectErr }
+        onExited: (exitCode, exitStatus) => {
+            if (exitCode !== 0) {
+                root.homeWgActionStatus = root.shortLine(homeWgConnectErr.text || "Connect failed")
+                homeWgActionStatusTimer.restart()
+            } else if (!tailscaleDownProc.running) {
+                tailscaleDownProc.running = true
+            }
+            root.refreshHomeWg()
+        }
+    }
+
+    Process {
+        id: homeWgDisconnectProc
+        command: ["nmcli", "connection", "down", root.homeWgConnection]
+        stdout: StdioCollector {}
+        stderr: StdioCollector { id: homeWgDisconnectErr }
+        onExited: (exitCode, exitStatus) => {
+            if (exitCode !== 0) {
+                root.homeWgActionStatus = root.shortLine(homeWgDisconnectErr.text || "Disconnect failed")
+                homeWgActionStatusTimer.restart()
+            } else {
+                root.homeWgState = "disconnected"
+            }
+            root.refreshHomeWg()
+            root.resumePendingConnect()
+        }
+    }
+
+    Process {
+        id: homeWgImportProc
+        command: ["bash", Quickshell.shellPath("scripts/ImportUnifiWireguard.sh"),
+            "--pick", root.homeWgConnection, "--replace"]
+        stdout: StdioCollector {}
+        stderr: StdioCollector { id: homeWgImportErr }
+        onExited: (exitCode, exitStatus) => {
+            // 3 = chooser cancelled — nothing to report.
+            if (exitCode === 0) root.homeWgActionStatus = "Config imported"
+            else if (exitCode !== 3) root.homeWgActionStatus = root.shortLine(homeWgImportErr.text || "Import failed")
+            if (root.homeWgActionStatus !== "") homeWgActionStatusTimer.restart()
+            root.refreshHomeWg()
+            panel.visible = true
+            grab.active = true
+        }
+    }
+
     // --- Shared timers -----------------------------------------------------
 
     Timer {
@@ -510,6 +663,13 @@ Item {
         onTriggered: root.protonActionStatus = ""
     }
 
+    Timer {
+        id: homeWgActionStatusTimer
+        interval: 4000
+        repeat: false
+        onTriggered: root.homeWgActionStatus = ""
+    }
+
     // --- Bar icon ------------------------------------------------------------
 
     // A fixed, wallpaper-independent green rather than Colors.primary — the
@@ -615,6 +775,7 @@ Item {
         property string detailText: ""
         property string state: "disconnected"
         property bool installed: true
+        property string missingText: "Not installed"
         // When true, shows a chevron that expands a provider-specific
         // options section below this row (used for Mullvad's advanced
         // options; ProtonVPN's row leaves this false).
@@ -664,7 +825,7 @@ Item {
                 }
                 Text {
                     Layout.fillWidth: true
-                    text: !provRow.installed ? "Not installed"
+                    text: !provRow.installed ? provRow.missingText
                         : provRow.state === "connecting" ? "Connecting…"
                         : provRow.state === "disconnecting" ? "Disconnecting…"
                         : provRow.state === "connected" ? (provRow.detailText || "Connected")
@@ -848,7 +1009,124 @@ Item {
 
                 Column {
                     width: parent.width
-                    spacing: 2
+                    // Room for the cards' outlines (drawn 3px outside them)
+                    // so two expanded ones don't touch.
+                    spacing: 8
+
+                    // Same collapsible card as Mullvad below — framed only
+                    // while its options (Replace config) are expanded.
+                    Item {
+                        readonly property bool _framed: root.homeWgOptionsOpen && root.homeWgInstalled
+                        width: parent.width
+                        implicitHeight: homeWgSectionColumn.implicitHeight
+                        Behavior on implicitHeight {
+                            NumberAnimation { duration: Appearance.animationDuration; easing.type: Easing.OutCubic }
+                        }
+
+                        // Outline offset outside the content rather than drawn on
+                        // its own edge — same as Volume.qml's DeviceRow hover —
+                        // so the row doesn't shift when the options open.
+                        Rectangle {
+                            anchors.fill: parent
+                            anchors.margins: -3
+                            radius: 0
+                            color: "transparent"
+                            border.color: Colors.foreground
+                            border.width: parent._framed ? 1 : 0
+                        }
+
+                        // Clipped separately so the outline above isn't.
+                        Item {
+                            anchors.fill: parent
+                            clip: true
+
+                            Column {
+                                id: homeWgSectionColumn
+                                anchors.left: parent.left
+                                anchors.right: parent.right
+                                anchors.top: parent.top
+                                spacing: 8
+
+                                ProviderRow {
+                                    label: "Home (UniFi)"
+                                    subIcon: "home"
+                                    state: root.homeWgState
+                                    detailText: root.homeWgDetail
+                                    installed: root.homeWgInstalled
+                                    missingText: "Not set up"
+                                    expandable: root.homeWgInstalled
+                                    expanded: root.homeWgOptionsOpen
+                                    onToggle: root.toggleHomeWg()
+                                    onExpandToggle: root.homeWgOptionsOpen = !root.homeWgOptionsOpen
+                                }
+
+                                StatusLine { message: root.homeWgActionStatus }
+
+                                // Imports (or replaces) the UniFi client .conf through a
+                                // file chooser. Shown outright until a profile exists
+                                // (so first-time setup isn't hidden behind the
+                                // chevron), then only inside the expanded options.
+                                // Hidden while connected — replacing deletes the
+                                // profile, which would drop the tunnel.
+                                Item {
+                                    width: parent.width
+                                    implicitHeight: importRow.implicitHeight + 8
+                                    visible: root.homeWgState === "disconnected"
+                                        && (!root.homeWgInstalled || root.homeWgOptionsOpen)
+
+                                    Row {
+                                        id: importRow
+                                        anchors.left: parent.left
+                                        anchors.leftMargin: 34
+                                        anchors.verticalCenter: parent.verticalCenter
+                                        spacing: 4
+                                        opacity: root.homeWgImporting ? 0.5 : 1
+
+                                        Text {
+                                            anchors.verticalCenter: parent.verticalCenter
+                                            text: root.homeWgInstalled ? "sync" : "upload_file"
+                                            font.family: Appearance.iconFontFamilyRounded
+                                            font.variableAxes: Appearance.iconFontAxes
+                                            font.pixelSize: 13
+                                            color: importMouse.containsMouse ? Colors.foreground : Colors.primary
+                                        }
+                                        Text {
+                                            anchors.verticalCenter: parent.verticalCenter
+                                            text: root.homeWgImporting ? "Choosing file…"
+                                                : root.homeWgInstalled ? "Replace config" : "Add config"
+                                            font.family: Appearance.fontFamily
+                                            font.pixelSize: Appearance.fontSizeSmall
+                                            font.underline: importMouse.containsMouse
+                                            color: importMouse.containsMouse ? Colors.foreground : Colors.primary
+                                        }
+                                    }
+
+                                    MouseArea {
+                                        id: importMouse
+                                        anchors.fill: importRow
+                                        anchors.margins: -4
+                                        enabled: !root.homeWgImporting
+                                        hoverEnabled: true
+                                        cursorShape: Qt.PointingHandCursor
+                                        onClicked: root.importHomeWgConfig()
+                                    }
+                                }
+
+                                Text {
+                                    x: 34
+                                    width: parent.width - x
+                                    visible: root.homeWgOptionsOpen && root.homeWgInstalled
+                                        && root.homeWgState !== "disconnected"
+                                    text: "Disconnect to replace config"
+                                bottomPadding: 6
+                                    font.family: Appearance.fontFamily
+                                    font.pixelSize: Appearance.fontSizeSmall
+                                    color: Colors.muted
+                                    wrapMode: Text.WordWrap
+                                }
+                            }
+                        }
+                    }
 
                     // Mullvad's connect row and its advanced options share a
                     // single bordered card — the border wraps the whole
@@ -856,14 +1134,11 @@ Item {
                     // grows to include the options/picker as they open,
                     // rather than the options having a separate box of
                     // their own below an unbordered connect row.
-                    Rectangle {
+                    // Only outlined while the options are expanded.
+                    Item {
+                        readonly property bool _framed: root.mullvadOptionsOpen && root.mullvadInstalled
                         width: parent.width
-                        radius: 0
-                        color: Colors.background
-                        border.color: Colors.muted
-                        border.width: 1
-                        implicitHeight: mullvadSectionColumn.implicitHeight + 16
-                        clip: true
+                        implicitHeight: mullvadSectionColumn.implicitHeight
                         // Without this, the card snapped to its new size
                         // instantly while the popup around it was still
                         // animating open, so the border visibly lagged
@@ -873,171 +1148,188 @@ Item {
                             NumberAnimation { duration: Appearance.animationDuration; easing.type: Easing.OutCubic }
                         }
 
-                        Column {
-                            id: mullvadSectionColumn
-                            anchors.left: parent.left
-                            anchors.right: parent.right
-                            anchors.top: parent.top
-                            anchors.margins: 8
-                            spacing: 8
+                        // Outline offset outside the content rather than drawn on
+                        // its own edge — same as Volume.qml's DeviceRow hover —
+                        // so the row doesn't shift when the options open.
+                        Rectangle {
+                            anchors.fill: parent
+                            anchors.margins: -3
+                            radius: 0
+                            color: "transparent"
+                            border.color: Colors.foreground
+                            border.width: parent._framed ? 1 : 0
+                        }
 
-                            ProviderRow {
-                                label: "Mullvad"
-                                subIcon: "gpp_good"
-                                state: root.mullvadState
-                                detailText: root.mullvadDetail
-                                installed: root.mullvadInstalled
-                                expandable: root.mullvadInstalled
-                                expanded: root.mullvadOptionsOpen
-                                onToggle: root.toggleMullvad()
-                                onExpandToggle: root.openMullvadOptions()
-                            }
+                        // Clipped separately so the outline above isn't.
+                        Item {
+                            anchors.fill: parent
+                            clip: true
 
-                            StatusLine { message: root.mullvadActionStatus }
-
-                            // Advanced options — auto-connect, exit/entry
-                            // relay location, multihop.
                             Column {
-                                id: mullvadOptionsColumn
-                                width: parent.width
-                                visible: root.mullvadOptionsOpen && root.mullvadInstalled
+                                id: mullvadSectionColumn
+                                anchors.left: parent.left
+                                anchors.right: parent.right
+                                anchors.top: parent.top
                                 spacing: 8
 
-                            RowLayout {
-                                width: parent.width
-                                Text {
-                                    Layout.fillWidth: true
-                                    text: "Auto-connect"
-                                    font.family: Appearance.fontFamily
-                                    font.pixelSize: Appearance.fontSizeSmall
-                                    color: Colors.foreground
+                                ProviderRow {
+                                    label: "Mullvad"
+                                    subIcon: "gpp_good"
+                                    state: root.mullvadState
+                                    detailText: root.mullvadDetail
+                                    installed: root.mullvadInstalled
+                                    expandable: root.mullvadInstalled
+                                    expanded: root.mullvadOptionsOpen
+                                    onToggle: root.toggleMullvad()
+                                    onExpandToggle: root.openMullvadOptions()
                                 }
-                                ToggleSwitch {
-                                    checked: root.mullvadAutoConnect
-                                    busy: mullvadAutoConnectSetProc.running
-                                    onToggled: root.setMullvadAutoConnect(!root.mullvadAutoConnect)
-                                }
-                            }
 
-                            RowLayout {
-                                width: parent.width
-                                Text {
-                                    Layout.fillWidth: true
-                                    text: "Multihop"
-                                    font.family: Appearance.fontFamily
-                                    font.pixelSize: Appearance.fontSizeSmall
-                                    color: Colors.foreground
-                                }
-                                ToggleSwitch {
-                                    checked: root.mullvadMultihop
-                                    busy: mullvadRelaySetProc.running
-                                    onToggled: root.setMullvadMultihop(!root.mullvadMultihop)
-                                }
-                            }
+                                StatusLine { message: root.mullvadActionStatus }
 
-                            LocationField {
-                                fieldLabel: root.mullvadMultihop ? "Exit" : "Location"
-                                valueText: root.mullvadLocationLabel
-                                open: root.mullvadPickerTarget === "exit"
-                                onClicked: root.openMullvadPicker("exit")
-                            }
-
-                            LocationField {
-                                visible: root.mullvadMultihop
-                                fieldLabel: "Entry"
-                                valueText: root.mullvadEntryLabel
-                                open: root.mullvadPickerTarget === "entry"
-                                onClicked: root.openMullvadPicker("entry")
-                            }
-
-                            // Shared country picker for whichever LocationField
-                            // was last clicked — filter box plus a capped,
-                            // scrollable list ("Any" always pinned first).
-                            Column {
-                                width: parent.width
-                                visible: root.mullvadPickerTarget !== ""
-                                spacing: 6
-
-                                Rectangle {
+                                // Advanced options — auto-connect, exit/entry
+                                // relay location, multihop.
+                                Column {
+                                    id: mullvadOptionsColumn
                                     width: parent.width
-                                    implicitHeight: 24
-                                    radius: 0
-                                    color: Colors.surface
-                                    border.color: Colors.muted
-                                    border.width: 1
+                                    visible: root.mullvadOptionsOpen && root.mullvadInstalled
+                                    spacing: 8
 
+                                RowLayout {
+                                    width: parent.width
                                     Text {
-                                        anchors.fill: parent
-                                        anchors.margins: 6
-                                        visible: mullvadFilterInput.text.length === 0
-                                        text: "Search country…"
+                                        Layout.fillWidth: true
+                                        text: "Auto-connect"
                                         font.family: Appearance.fontFamily
                                         font.pixelSize: Appearance.fontSizeSmall
-                                        color: Colors.muted
-                                    }
-
-                                    TextInput {
-                                        id: mullvadFilterInput
-                                        anchors.fill: parent
-                                        anchors.margins: 6
                                         color: Colors.foreground
-                                        font.family: Appearance.fontFamily
-                                        font.pixelSize: Appearance.fontSizeSmall
-                                        clip: true
-                                        focus: root.mullvadPickerTarget !== ""
-                                        text: root.mullvadPickerFilter
-                                        onTextChanged: root.mullvadPickerFilter = text
+                                    }
+                                    ToggleSwitch {
+                                        checked: root.mullvadAutoConnect
+                                        busy: mullvadAutoConnectSetProc.running
+                                        onToggled: root.setMullvadAutoConnect(!root.mullvadAutoConnect)
                                     }
                                 }
 
-                                Flickable {
-                                    id: mullvadPickerFlick
+                                RowLayout {
                                     width: parent.width
-                                    height: Math.min(mullvadPickerColumn.implicitHeight, 150)
-                                    contentWidth: width
-                                    contentHeight: mullvadPickerColumn.implicitHeight
-                                    clip: true
-                                    boundsBehavior: Flickable.StopAtBounds
+                                    Text {
+                                        Layout.fillWidth: true
+                                        text: "Multihop"
+                                        font.family: Appearance.fontFamily
+                                        font.pixelSize: Appearance.fontSizeSmall
+                                        color: Colors.foreground
+                                    }
+                                    ToggleSwitch {
+                                        checked: root.mullvadMultihop
+                                        busy: mullvadRelaySetProc.running
+                                        onToggled: root.setMullvadMultihop(!root.mullvadMultihop)
+                                    }
+                                }
 
-                                    Column {
-                                        id: mullvadPickerColumn
-                                        width: mullvadPickerFlick.width
-                                        spacing: 1
+                                LocationField {
+                                    fieldLabel: root.mullvadMultihop ? "Exit" : "Location"
+                                    valueText: root.mullvadLocationLabel
+                                    open: root.mullvadPickerTarget === "exit"
+                                    onClicked: root.openMullvadPicker("exit")
+                                }
 
-                                        Repeater {
-                                            model: [{ name: "Any", code: "any" }].concat(root.mullvadFilteredCountries)
-                                            Rectangle {
-                                                required property var modelData
-                                                width: parent.width
-                                                implicitHeight: 22
-                                                radius: 0
-                                                color: countryMouse.containsMouse ? Colors.primary : "transparent"
+                                LocationField {
+                                    visible: root.mullvadMultihop
+                                    fieldLabel: "Entry"
+                                    valueText: root.mullvadEntryLabel
+                                    open: root.mullvadPickerTarget === "entry"
+                                    onClicked: root.openMullvadPicker("entry")
+                                }
 
-                                                Text {
-                                                    anchors.left: parent.left
-                                                    anchors.right: parent.right
-                                                    anchors.verticalCenter: parent.verticalCenter
-                                                    anchors.leftMargin: 4
-                                                    anchors.rightMargin: 4
-                                                    elide: Text.ElideRight
-                                                    text: modelData.name
-                                                    font.family: Appearance.fontFamily
-                                                    font.pixelSize: Appearance.fontSizeSmall
-                                                    color: countryMouse.containsMouse ? Colors.primaryText : Colors.foreground
-                                                }
+                                // Shared country picker for whichever LocationField
+                                // was last clicked — filter box plus a capped,
+                                // scrollable list ("Any" always pinned first).
+                                Column {
+                                    width: parent.width
+                                    visible: root.mullvadPickerTarget !== ""
+                                    spacing: 6
 
-                                                MouseArea {
-                                                    id: countryMouse
-                                                    anchors.fill: parent
-                                                    hoverEnabled: true
-                                                    cursorShape: Qt.PointingHandCursor
-                                                    onClicked: root.pickMullvadLocation(modelData.code)
+                                    Rectangle {
+                                        width: parent.width
+                                        implicitHeight: 24
+                                        radius: 0
+                                        color: Colors.surface
+                                        border.color: Colors.muted
+                                        border.width: 1
+
+                                        Text {
+                                            anchors.fill: parent
+                                            anchors.margins: 6
+                                            visible: mullvadFilterInput.text.length === 0
+                                            text: "Search country…"
+                                            font.family: Appearance.fontFamily
+                                            font.pixelSize: Appearance.fontSizeSmall
+                                            color: Colors.muted
+                                        }
+
+                                        TextInput {
+                                            id: mullvadFilterInput
+                                            anchors.fill: parent
+                                            anchors.margins: 6
+                                            color: Colors.foreground
+                                            font.family: Appearance.fontFamily
+                                            font.pixelSize: Appearance.fontSizeSmall
+                                            clip: true
+                                            focus: root.mullvadPickerTarget !== ""
+                                            text: root.mullvadPickerFilter
+                                            onTextChanged: root.mullvadPickerFilter = text
+                                        }
+                                    }
+
+                                    Flickable {
+                                        id: mullvadPickerFlick
+                                        width: parent.width
+                                        height: Math.min(mullvadPickerColumn.implicitHeight, 150)
+                                        contentWidth: width
+                                        contentHeight: mullvadPickerColumn.implicitHeight
+                                        clip: true
+                                        boundsBehavior: Flickable.StopAtBounds
+
+                                        Column {
+                                            id: mullvadPickerColumn
+                                            width: mullvadPickerFlick.width
+                                            spacing: 1
+
+                                            Repeater {
+                                                model: [{ name: "Any", code: "any" }].concat(root.mullvadFilteredCountries)
+                                                Rectangle {
+                                                    required property var modelData
+                                                    width: parent.width
+                                                    implicitHeight: 22
+                                                    radius: 0
+                                                    color: countryMouse.containsMouse ? Colors.primary : "transparent"
+
+                                                    Text {
+                                                        anchors.left: parent.left
+                                                        anchors.right: parent.right
+                                                        anchors.verticalCenter: parent.verticalCenter
+                                                        anchors.leftMargin: 4
+                                                        anchors.rightMargin: 4
+                                                        elide: Text.ElideRight
+                                                        text: modelData.name
+                                                        font.family: Appearance.fontFamily
+                                                        font.pixelSize: Appearance.fontSizeSmall
+                                                        color: countryMouse.containsMouse ? Colors.primaryText : Colors.foreground
+                                                    }
+
+                                                    MouseArea {
+                                                        id: countryMouse
+                                                        anchors.fill: parent
+                                                        hoverEnabled: true
+                                                        cursorShape: Qt.PointingHandCursor
+                                                        onClicked: root.pickMullvadLocation(modelData.code)
+                                                    }
                                                 }
                                             }
                                         }
                                     }
                                 }
-                            }
+                                }
                             }
                         }
                     }
@@ -1056,7 +1348,7 @@ Item {
 
                 Text {
                     width: parent.width
-                    text: "Connecting one disconnects the other — only one VPN tunnel at a time."
+                    text: "Connecting one disconnects the others — only one VPN tunnel at a time."
                     font.family: Appearance.fontFamily
                     font.pixelSize: Appearance.fontSizeSmall
                     color: Colors.muted

dotfiles/.config/quickshell/modules/bar/Workspaces.qml

@@ -37,7 +37,8 @@ RowLayout {
             MouseArea {
                 anchors.fill: parent
                 cursorShape: Qt.PointingHandCursor
-                onClicked: Hyprland.dispatch("workspace " + modelData.name)
+                // Hyprland's Lua config expects Lua syntax from dispatch
+                onClicked: Hyprland.dispatch("hl.dsp.focus({ workspace = " + JSON.stringify(modelData.id > 0 ? modelData.id : modelData.name) + " })")
             }
         }
     }

dotfiles/.config/quickshell/modules/osd/VolumeOsd.qml

@@ -11,16 +11,13 @@ PanelWindow {
     color: "transparent"
     exclusiveZone: 0
 
-    // Top-right, just under the bar — same fixed distance from the bar and
-    // screen edge (Appearance.spacing) that every popup opened from the bar
-    // itself uses, so this lines up with them instead of floating
-    // bottom-center.
-    anchors { top: true; right: true }
-    margins.top: Appearance.spacing
-    margins.right: Appearance.spacing
+    // Bottom-center: anchoring only the bottom edge lets the layer shell
+    // center it horizontally.
+    anchors { bottom: true }
+    margins.bottom: Appearance.spacing * 4
 
-    implicitWidth: 272
-    implicitHeight: 54
+    implicitWidth: 300
+    implicitHeight: 60
 
     WlrLayershell.layer: WlrLayer.Overlay
     WlrLayershell.namespace: "quickshell:osd"
@@ -49,13 +46,13 @@ PanelWindow {
 
         RowLayout {
             anchors.fill: parent
-            anchors.margins: 14
-            spacing: 12
+            anchors.margins: 15
+            spacing: 13
 
             Text {
                 font.family: Appearance.iconFontFamilyRounded
                 font.variableAxes: Appearance.iconFontAxes
-                font.pixelSize: 18
+                font.pixelSize: 21
                 color: Colors.foreground
                 text: {
                     const audio = osd.sink ? osd.sink.audio : null
@@ -67,7 +64,7 @@ PanelWindow {
             Item {
                 id: slider
                 Layout.fillWidth: true
-                implicitHeight: 16
+                implicitHeight: 18
 
                 readonly property real value: osd.sink && osd.sink.audio ? osd.sink.audio.volume : 0
                 readonly property bool enabled: !!osd.sink
@@ -76,7 +73,7 @@ PanelWindow {
                     id: track
                     anchors.verticalCenter: parent.verticalCenter
                     width: parent.width
-                    height: 4
+                    height: 5
                     radius: 0
                     color: Colors.muted
                     opacity: 0.35
@@ -85,15 +82,15 @@ PanelWindow {
                     anchors.verticalCenter: parent.verticalCenter
                     anchors.left: parent.left
                     width: track.width * Math.max(0, Math.min(1, slider.value))
-                    height: 4
+                    height: 5
                     radius: 0
                     color: Colors.primary
                     opacity: slider.enabled ? 1 : 0.4
                 }
                 Rectangle {
-                    width: 12
-                    height: 12
-                    radius: 6
+                    width: 14
+                    height: 14
+                    radius: 7
                     color: Colors.primary
                     opacity: slider.enabled ? 1 : 0.4
                     anchors.verticalCenter: parent.verticalCenter
@@ -113,10 +110,10 @@ PanelWindow {
             }
 
             Text {
-                Layout.preferredWidth: 32
+                Layout.preferredWidth: 38
                 horizontalAlignment: Text.AlignRight
                 font.family: Appearance.fontFamily
-                font.pixelSize: Appearance.fontSizeSmall
+                font.pixelSize: 13
                 color: Colors.muted
                 text: Math.round(slider.value * 100) + "%"
             }

dotfiles/.config/quickshell/scripts/CheckQuickshellSetup.sh

@@ -159,6 +159,21 @@ if [ $have_mullvad -eq 0 ] && [ $have_proton -eq 0 ]; then
     warn "neither Mullvad nor ProtonVPN CLI is installed — VpnIndicator.qml will show both as 'Not installed'"
 fi
 
+# Keep in sync with homeWgConnection in VpnIndicator.qml.
+if nmcli -g connection.type connection show unifi-home >/dev/null 2>&1; then
+    pass "NetworkManager profile 'unifi-home' exists — used by VpnIndicator.qml (Home/UniFi row)"
+else
+    warn "no NetworkManager profile 'unifi-home' — import one from the VPN panel's 'Add config' button (optional)"
+fi
+
+# The 'Add config' button's file chooser (scripts/PickFile.py) talks to
+# xdg-desktop-portal over D-Bus via PyGObject.
+if python3 -c "from gi.repository import Gio" >/dev/null 2>&1; then
+    pass "PyGObject available — used by PickFile.py (VPN 'Add config' file chooser)"
+else
+    warn "PyGObject (python-gobject) missing — the VPN panel's 'Add config' button can't open a file chooser"
+fi
+
 # --- 4. VPN daemons + functional status (Mullvad/ProtonVPN/Tailscale) -------
 # The exclusivity logic (VpnExclusivity.qml backing off Tailscale when a
 # commercial VPN connects) is pure QML and ships with the dotfiles — it

dotfiles/.config/quickshell/scripts/ImportUnifiWireguard.sh

@@ -0,0 +1,84 @@
+#!/bin/bash
+# Imports a UniFi WireGuard VPN Server client config into NetworkManager
+# under the profile name VpnIndicator.qml expects (homeWgConnection,
+# "unifi-home" by default), so the bar's VPN panel can toggle it.
+#
+# Get the .conf from UniFi Network: Settings → VPN → VPN Server → your
+# WireGuard server → Add Client → Download.
+#
+# Usage: ./ImportUnifiWireguard.sh <client.conf> [profile-name] [--replace]
+#        ./ImportUnifiWireguard.sh --pick [profile-name] [--replace]
+#
+# --pick opens a file chooser (PickFile.py) instead of taking a path — this
+# is what the VPN panel's "Add config" button runs. Exits 3 if cancelled.
+#
+# NetworkManager names both the profile and the interface after the file's
+# basename, so the config is copied to <profile-name>.conf first (interface
+# names max out at 15 chars). The private key ends up in a root-only file
+# under /etc/NetworkManager/system-connections — delete the downloaded
+# .conf afterwards.
+
+set -euo pipefail
+
+replace=0
+pick=0
+args=()
+for a in "$@"; do
+    case "$a" in
+        --replace) replace=1 ;;
+        --pick) pick=1 ;;
+        -h|--help) sed -n '2,19p' "$0" | sed 's/^# \{0,1\}//'; exit 0 ;;
+        *) args+=("$a") ;;
+    esac
+done
+
+if [ $pick -eq 1 ]; then
+    conf=""
+    name="${args[0]:-unifi-home}"
+    rc=0
+    conf=$("$(dirname "$0")/PickFile.py" "Select UniFi WireGuard config" "*.conf") || rc=$?
+    if [ $rc -eq 1 ]; then echo "Cancelled" >&2; exit 3; fi
+    if [ $rc -ne 0 ]; then echo "Couldn't open a file chooser" >&2; exit 1; fi
+else
+    conf="${args[0]:-}"
+    name="${args[1]:-unifi-home}"
+fi
+
+if [ -z "$conf" ] || [ ! -f "$conf" ]; then
+    echo "Usage: $0 <client.conf> [profile-name] [--replace]" >&2
+    exit 1
+fi
+if ! [[ "$name" =~ ^[A-Za-z0-9_-]{1,15}$ ]]; then
+    echo "Profile name must be 1-15 chars of [A-Za-z0-9_-] (it doubles as the interface name)" >&2
+    exit 1
+fi
+
+if nmcli -g connection.id connection show "$name" >/dev/null 2>&1; then
+    if [ $replace -eq 1 ]; then
+        nmcli connection delete "$name" >/dev/null
+    else
+        echo "A NetworkManager profile named '$name' already exists — rerun with --replace to overwrite it" >&2
+        exit 1
+    fi
+fi
+
+tmpdir=$(mktemp -d)
+trap 'rm -rf "$tmpdir"' EXIT
+install -m 600 "$conf" "$tmpdir/$name.conf"
+
+if ! grep -qi '^\[Interface\]' "$tmpdir/$name.conf" || ! grep -qi '^\[Peer\]' "$tmpdir/$name.conf"; then
+    echo "$(basename "$conf") doesn't look like a WireGuard config" >&2
+    exit 1
+fi
+
+nmcli connection import type wireguard file "$tmpdir/$name.conf"
+# Only ever brought up deliberately from the bar — never on boot or on
+# joining a network, where it'd silently fight Tailscale/Mullvad/ProtonVPN.
+nmcli connection modify "$name" connection.autoconnect no
+# Import itself defaults to autoconnect=yes, so NetworkManager may already
+# have started bringing it up in the moment before the modify above.
+nmcli connection down "$name" >/dev/null 2>&1 || true
+
+echo
+echo "Imported as '$name'. Toggle it from the VPN panel, or: nmcli connection up $name"
+echo "You can now delete $conf"

dotfiles/.config/quickshell/scripts/PickFile.py

@@ -0,0 +1,74 @@
+#!/usr/bin/env python3
+# Opens the xdg-desktop-portal file chooser and prints the picked file's
+# path. Quickshell has no usable file dialog of its own (QtQuick.Dialogs'
+# fallback renders inside the calling window, i.e. the tiny bar popup), and
+# no zenity/kdialog is installed — the portal goes through
+# xdg-desktop-portal-gtk, which is.
+#
+# Usage: PickFile.py [title] [glob ...]
+# Exits 0 and prints the path on a pick, 1 on cancel, 2 on error.
+
+import os
+import sys
+from urllib.parse import unquote, urlparse
+
+from gi.repository import Gio, GLib
+
+title = sys.argv[1] if len(sys.argv) > 1 else "Open File"
+globs = sys.argv[2:]
+
+try:
+    bus = Gio.bus_get_sync(Gio.BusType.SESSION, None)
+except GLib.Error as e:
+    print(f"No session bus: {e.message}", file=sys.stderr)
+    sys.exit(2)
+
+# The portal answers on a Request object whose path is derived from our
+# unique bus name and handle_token, so subscribe to it before calling —
+# otherwise a fast response could arrive before we're listening.
+token = f"quickshell_{os.getpid()}"
+sender = bus.get_unique_name().lstrip(":").replace(".", "_")
+handle = f"/org/freedesktop/portal/desktop/request/{sender}/{token}"
+
+loop = GLib.MainLoop()
+result = {"code": 2, "uris": []}
+
+
+def on_response(_conn, _sender, _path, _iface, _signal, params):
+    code, results = params.unpack()
+    result["code"] = code
+    result["uris"] = results.get("uris", [])
+    loop.quit()
+
+
+bus.signal_subscribe("org.freedesktop.portal.Desktop", "org.freedesktop.portal.Request",
+                     "Response", handle, None, Gio.DBusSignalFlags.NONE, on_response)
+
+options = {
+    "handle_token": GLib.Variant("s", token),
+    "modal": GLib.Variant("b", True),
+}
+filters = []
+if globs:
+    filters.append((", ".join(globs), [(0, g) for g in globs]))
+filters.append(("All files", [(0, "*")]))
+options["filters"] = GLib.Variant("a(sa(us))", filters)
+downloads = os.path.expanduser("~/Downloads")
+if os.path.isdir(downloads):
+    options["current_folder"] = GLib.Variant("ay", downloads.encode() + b"\0")
+
+try:
+    bus.call_sync("org.freedesktop.portal.Desktop", "/org/freedesktop/portal/desktop",
+                  "org.freedesktop.portal.FileChooser", "OpenFile",
+                  GLib.Variant("(ssa{sv})", ("", title, options)),
+                  GLib.VariantType("(o)"), Gio.DBusCallFlags.NONE, -1, None)
+except GLib.Error as e:
+    print(f"File chooser portal unavailable: {e.message}", file=sys.stderr)
+    sys.exit(2)
+
+loop.run()
+
+# Response codes: 0 = picked, 1 = cancelled, 2 = other failure.
+if result["code"] != 0 or not result["uris"]:
+    sys.exit(1 if result["code"] == 1 else 2)
+print(unquote(urlparse(result["uris"][0]).path))

dotfiles/.config/quickshell/scripts/sync-dotfiles.sh

@@ -0,0 +1,50 @@
+#!/bin/bash
+# Run by update-system.sh inside the update terminal, before the system
+# update — pulls the dotfiles repo and re-stows it so both machines pick up
+# config changes on every update.
+#
+# Never fails the update: a pull that can't fast-forward (local commits or
+# uncommitted changes in the way) or a stow conflict just prints a warning
+# and leaves things as they were, then the system update carries on.
+
+DOTFILES="$HOME/Projects/dotfiles"
+
+warn() { printf '\033[1;33m%s\033[0m\n' "$*"; }
+info() { printf '\033[1;36m%s\033[0m\n' "$*"; }
+
+if [ ! -d "$DOTFILES/.git" ]; then
+  warn "Dotfiles repo not found at $DOTFILES — skipping."
+  exit 0
+fi
+
+info "Pulling dotfiles..."
+# Fetch and merge separately so the warning says which one went wrong — the
+# remote is SSH via Bitwarden's agent, so a failed fetch is almost always
+# Bitwarden being closed or locked.
+if ! git -C "$DOTFILES" fetch; then
+  warn "Couldn't reach the dotfiles remote — is Bitwarden open and unlocked? Skipping stow."
+  echo
+  exit 0
+fi
+# --ff-only so a diverged branch never produces a surprise merge commit;
+# sort that out by hand instead.
+if ! git -C "$DOTFILES" merge --ff-only; then
+  warn "Couldn't fast-forward dotfiles (local changes or diverged branch) — skipping stow."
+  echo
+  exit 0
+fi
+
+if ! command -v stow &> /dev/null; then
+  warn "stow not installed — skipping."
+  exit 0
+fi
+
+info "Applying dotfiles with stow..."
+# -R restows: drops links for files removed from the repo and adds new ones.
+if stow -R -d "$DOTFILES" -t "$HOME" dotfiles; then
+  info "Dotfiles applied."
+else
+  warn "stow hit a conflict — nothing was changed. Fix it and re-run:"
+  warn "  stow -R -d $DOTFILES -t ~ dotfiles"
+fi
+echo

dotfiles/.config/quickshell/scripts/update-system.sh

@@ -58,5 +58,9 @@ fi
 # any output/errors with it.
 WAIT_PROMPT="echo; read -p 'Update finished — press Enter to close...'"
 
-foot -T update bash -c "$BANNER; $CMD; $WAIT_PROMPT"
+# Pull + re-stow the dotfiles first, so config changes from the other machine
+# land alongside the package update.
+SYNC="$(printf '%q' "$(dirname "$0")/sync-dotfiles.sh")"
+
+foot -T update bash -c "$BANNER; $SYNC; $CMD; $WAIT_PROMPT"
 notify-send -i "$iDIR/profile-pic.jpg" -u low "$LABEL" 'has been updated.'

dotfiles/.config/sunshine/.gitignore

@@ -0,0 +1,5 @@
+# Machine-local Sunshine state lives next to the stowed config; never commit it
+credentials/
+*.log
+*.log.*
+sunshine_state.json

dotfiles/.config/sunshine/apps.json

@@ -0,0 +1,47 @@
+{
+  "env": {
+    "PATH": "$(PATH):$(HOME)/.local/bin"
+  },
+  "apps": [
+    {
+      "name": "Desktop",
+      "image-path": "desktop.png"
+    },
+    {
+      "name": "Low Res Desktop",
+      "image-path": "desktop.png",
+      "prep-cmd": [
+        {
+          "do": "xrandr --output HDMI-1 --mode 1920x1080",
+          "undo": "xrandr --output HDMI-1 --mode 1920x1200"
+        }
+      ]
+    },
+    {
+      "name": "Steam Big Picture",
+      "detached": [
+        "setsid steam steam://open/bigpicture"
+      ],
+      "prep-cmd": [
+        {
+          "do": "/home/thomas/.config/sunshine/scripts/steam-bigpicture-prep.sh",
+          "undo": "setsid steam steam://close/bigpicture"
+        }
+      ],
+      "image-path": "steam.png"
+    },
+    {
+      "name": "Steam Big Picture (TV)",
+      "detached": [
+        "setsid steam steam://open/bigpicture"
+      ],
+      "prep-cmd": [
+        {
+          "do": "/home/thomas/.config/sunshine/scripts/steam-bigpicture-tv-prep.sh",
+          "undo": "/home/thomas/.config/sunshine/scripts/steam-bigpicture-tv-undo.sh"
+        }
+      ],
+      "image-path": "steam.png"
+    }
+  ]
+}

dotfiles/.config/sunshine/scripts/steam-bigpicture-prep.sh

@@ -0,0 +1,17 @@
+#!/bin/sh
+# Run before Sunshine launches Steam Big Picture: focus the headless virtual
+# monitor and park the cursor on it, so Big Picture (which spawns on whatever
+# monitor currently has focus/the mouse) opens there instead of wherever the
+# mouse happened to be.
+set -e
+hyprctl dispatch 'hl.dsp.focus({monitor = "HEADLESS-1"})'
+hyprctl dispatch 'hl.dsp.cursor.move({x = 5344, y = 540})'
+
+# Sunshine only flips the system default audio sink to sink-sunshine-stereo
+# after the streaming session/client handshake completes (~500ms after this
+# script runs and Steam is spawned) — see sunshine.log timestamps. If Steam's
+# own audio (SDL) initializes in that window, it binds to whatever was
+# default at the time (the real HDMI output) and never re-homes even after
+# Sunshine's swap. Set it here first so it's already correct before Steam
+# ever launches; Sunshine's own (redundant) swap right after is harmless.
+pactl set-default-sink sink-sunshine-stereo || true

dotfiles/.config/sunshine/scripts/steam-bigpicture-tv-prep.sh

@@ -0,0 +1,18 @@
+#!/bin/sh
+# Run before Sunshine launches Steam Big Picture for the 4K TV target.
+# Switches the headless virtual monitor from its default 1728x1080@60
+# (used for the Steam Deck target) up to 3840x2160@60, then focuses it
+# and parks the cursor there so Big Picture opens on it. Reverted by
+# steam-bigpicture-tv-undo.sh once the stream ends.
+set -e
+# NOTE: this Hyprland build uses the Lua config layer, which rejects the
+# usual `hyprctl keyword monitor ...` syntax ("keyword can't work with
+# non-legacy parsers. Use eval.") — hl.monitor() via `hyprctl eval` is the
+# runtime equivalent of the hl.monitor() call in layout/monitors.lua.
+hyprctl eval 'hl.monitor({ output = "HEADLESS-1", mode = "3840x2160@60.00000", position = "4480x0", scale = 1.00000000, transform = 0, vrr = 0 })'
+hyprctl dispatch 'hl.dsp.focus({monitor = "HEADLESS-1"})'
+hyprctl dispatch 'hl.dsp.cursor.move({x = 6400, y = 1080})'
+
+# See steam-bigpicture-prep.sh for why this runs here instead of relying on
+# Sunshine's own post-handshake audio-sink swap.
+pactl set-default-sink sink-sunshine-stereo || true

dotfiles/.config/sunshine/scripts/steam-bigpicture-tv-undo.sh

@@ -0,0 +1,6 @@
+#!/bin/sh
+# Undo for steam-bigpicture-tv-prep.sh: close Big Picture and restore
+# HEADLESS-1 to its default mode (the one the Steam Deck target expects).
+set -e
+setsid steam steam://close/bigpicture
+hyprctl eval 'hl.monitor({ output = "HEADLESS-1", mode = "1728x1080@60.00000", position = "4480x0", scale = 1.00000000, transform = 0, vrr = 0 })'

dotfiles/.config/sunshine/sunshine.conf

@@ -0,0 +1,5 @@
+audio_sink = sink-sunshine-stereo
+csrf_allowed_origins = https://xol.twhomelab.local:47990
+nvenc_preset = 4
+output_name = HEADLESS-1
+global_prep_cmd = [{"do":"/home/thomas/.config/hypr/scripts/SunshineIdle.sh start","undo":"/home/thomas/.config/hypr/scripts/SunshineIdle.sh stop"}]

dotfiles/.config/waybar/config

@@ -13,7 +13,7 @@
         "tooltip-format": "{ipaddr} via {gwaddr}",
         "tooltip-format-disconnected": "Disconnected",
         "max-length": 50,
-        "on-click": "orbit toggle top-right",
+        "on-click": "nm-connection-editor",
         "on-click-right": "kitty -e nmtui",
         "format-icons": {
             "wifi": ["󰤯", "󰤟", "󰤢", "󰤥", "󰤨"],

dotfiles/.local/bin/Plex

@@ -0,0 +1,18 @@
+#!/bin/sh
+# Wrapper for the plex-desktop package's /usr/bin/Plex (-> /opt/plex-desktop/Plex.sh).
+#
+# QT_QUICK_CONTROLS_STYLE=org.hyprland.style is set globally in
+# hypr/core/env.lua for other Qt/QML apps' theming (hyprland-qt-support), but
+# Plex Desktop bundles its own private Qt/QML runtime that doesn't ship that
+# style plugin — inheriting the var makes it fail to load its UI and exit
+# immediately with "module \"org.hyprland.style\" is not installed" (see
+# ~/.local/share/plex/Logs/Plex.log). This dir is first on $PATH, so it
+# shadows /usr/bin/Plex for both a terminal launch and the .desktop entry
+# (Exec=Plex is PATH-resolved) without touching the global env var.
+# QT_QPA_PLATFORM: hypr env sets "wayland;xcb"; under Wayland the bundled
+# QtWebEngine never runs the web client and the window stays blank.
+unset QT_QUICK_CONTROLS_STYLE
+export QT_QPA_PLATFORM=xcb
+# Unset in the session; without it the X11 cursor in Plex is huge.
+export XCURSOR_SIZE=24
+exec /opt/plex-desktop/Plex.sh "$@"

dotfiles/.local/share/applications/tv.plex.PlexDesktop.desktop

@@ -0,0 +1,31 @@
+# User override of /usr/share/applications/tv.plex.PlexDesktop.desktop
+# (~/.local/share/applications takes XDG precedence over /usr/share for the
+# same filename, so this is picked up by app launchers instead automatically
+# — no association/mimeapps changes needed).
+#
+# QT_QPA_PLATFORM=xcb is kept from upstream: hypr env sets "wayland;xcb", and
+# under Wayland the bundled QtWebEngine never runs the web client (blank
+# window, no [Web] lines in Plex.log). XCURSOR_SIZE=24 is also kept from
+# upstream: it is unset in the session, so the X11 cursor comes out huge.
+#
+# Change from upstream: Exec unsets QT_QUICK_CONTROLS_STYLE and calls
+# the package's Plex.sh directly, bypassing $PATH entirely. Plex Desktop
+# bundles its own private Qt/QML runtime that doesn't ship the
+# "org.hyprland.style" QQC2 style hypr/core/env.lua sets globally for other
+# apps' theming — inheriting it makes Plex fail to load its UI and exit
+# immediately with "module \"org.hyprland.style\" is not installed" (see
+# ~/.local/share/plex/Logs/Plex.log). Going straight to the fixed install
+# path (rather than relying on the .local/bin/Plex wrapper shadowing
+# /usr/bin/Plex on $PATH) means this keeps working even if $PATH order ever
+# changes.
+[Desktop Entry]
+Type=Application
+Name=Plex
+Comment=Plex client for desktop computers
+Exec=env -u QT_QUICK_CONTROLS_STYLE QT_QPA_PLATFORM=xcb XCURSOR_SIZE=24 /opt/plex-desktop/Plex.sh
+Icon=tv.plex.PlexDesktop
+Terminal=false
+Categories=AudioVideo;Player;X-Media;
+X-Flatpak=tv.plex.PlexDesktop
+StartupWMClass=Plex
+Name[en_US]=Plex

dotfiles/.ssh/config

@@ -0,0 +1,18 @@
+Host gavin.twhomelab.local
+  HostName gavin.twhomelab.local
+  User thoams
+
+Host 192.168.1.87
+  HostName 192.168.1.87
+  User thoams
+  ForwardAgent yes
+
+Host 192.168.1.83
+  HostName 192.168.1.83
+  User thoams
+  ForwardAgent yes
+
+Host 192.168.1.86
+  HostName 192.168.1.86
+  User thoams
+  ForwardAgent yes

dotfiles/.zshrc

@@ -23,7 +23,7 @@ source $ZSH/oh-my-zsh.sh
 
 # My alias
 
-alias cl='clear'
+alias cl='clear && fastfetch'
 alias zed='zeditor'
 alias ssh-gavin='ssh thoams@192.168.1.83'
 alias ssh-raspberry-pi='ssh thoams@192.168.1.86'
@@ -51,3 +51,4 @@ export ZED_ALLOW_EMULATED_GPU=1
 fastfetch
 
 eval "$(oh-my-posh init zsh --config $HOME/.config/ohmyposh/zen.toml)"
+export PATH="$HOME/.local/share/turritopsis/flutter-sdk/bin:$PATH"

system/install.sh

@@ -0,0 +1,11 @@
+#!/usr/bin/env bash
+# Installs system-level config that stow can't manage (needs root).
+set -euo pipefail
+
+repo="$(cd "$(dirname "$0")" && pwd)"
+
+# pacman: shared [options] snippet
+sudo install -m644 "$repo/pacman/options.conf" /etc/pacman.d/options.conf
+if ! grep -q '^Include = /etc/pacman.d/options.conf' /etc/pacman.conf; then
+    sudo sed -i '/^\[options\]/a Include = /etc/pacman.d/options.conf' /etc/pacman.conf
+fi

system/packages-review.txt

@@ -0,0 +1,176 @@
+# ============================================================================
+# New-install package review — generated from this machine on 2026-10-11
+#
+# HOW TO REVIEW
+#   - Keep a line          -> it gets installed
+#   - Delete the line, or put a "#" at the start -> it gets skipped
+#   - Everything after "#" on a line is just a description for you
+#
+# Notes I flagged (look for "!!" below):
+#   - Hardware-specific packages (CPU microcode, NVIDIA driver) only make
+#     sense on matching hardware — the script can auto-detect these instead.
+#   - Some packages are leftovers from other setups (e.g. XFCE, waybar,
+#     orbit-wifi which you removed in commit 88484f8).
+# ============================================================================
+
+## ---------------- Official repos (pacman) ----------------
+adw-gtk-theme                      # Unofficial GTK 3 port of the libadwaita theme
+amd-ucode                          # Microcode update image for AMD CPUs  !! AMD CPU only — auto-detect?
+awww                               # An Answer to your Wayland Wallpaper Woes
+baobab                             # A graphical directory tree analyzer
+base                               # Minimal package set to define a basic Arch Linux installation
+base-devel                         # Basic tools to build Arch Linux packages
+blueman                            # GTK+ Bluetooth Manager
+bluez                              # Daemons for the bluetooth protocol stack
+bluez-utils                        # Development and debugging utilities for the bluetooth protocol stack
+btop                               # A monitor of system resources, bpytop ported to C++
+dolphin                            # KDE File Manager
+dunst                              # Customizable and lightweight notification-daemon  !! you use swaync for notifications
+efibootmgr                         # Linux user-space application to modify the EFI Boot Manager
+fastfetch                          # A feature-rich and performance oriented neofetch like system information tool
+ffmpeg                             # Complete solution to record, convert and stream audio and video
+filezilla                          # Fast and reliable FTP, FTPS and SFTP client
+firefox                            # Fast, Private & Safe Web Browser
+flatpak                            # Linux application sandboxing and distribution framework (formerly xdg-app)
+foot                               # Fast, lightweight, and minimalistic Wayland terminal emulator
+fzf                                # Command-line fuzzy finder
+galculator                         # GTK based scientific calculator
+#garcon                            # Freedesktop.org compliant menu library  !! XFCE desktop leftover?
+gdu                                # Fast disk usage analyzer
+git                                # the fast distributed version control system
+gnome-calendar                     # Simple and beautiful calendar application designed to perfectly fit the GNOME desktop
+gnome-disk-utility                 # Disk Management Utility for GNOME
+gnome-font-viewer                  # A font viewer utility for GNOME
+gnome-keyring                      # Stores passwords and encryption keys
+gnome-text-editor                  # A simple text editor for the GNOME desktop
+grim                               # Screenshot utility for Wayland
+gst-plugin-pipewire                # Multimedia graph framework - pipewire plugin
+gvfs                               # Virtual filesystem implementation for GIO
+gvfs-smb                           # Virtual filesystem implementation for GIO - SMB/CIFS backend (Windows file sharing)
+htop                               # Interactive process viewer
+hypridle                           # hyprland’s idle daemon  !! commented out in startup.lua
+hyprland                           # a highly customizable dynamic tiling Wayland compositor
+hyprlock                           # hyprland’s GPU-accelerated screen locking utility  !! hypridle is commented out in startup.lua
+hyprshot                           # Hyprland screenshot utility
+imv                                # Image viewer for Wayland and X11
+jq                                 # Command-line JSON processor
+kitty                              # A modern, hackable, featureful, OpenGL-based terminal emulator  !! you use foot as terminal (kitty config not in dotfiles)
+libgsf                             # Extensible I/O abstraction library for dealing with structured file formats
+libmatroska                        # Matroska library
+libpulse                           # A featureful, general-purpose sound server (client library)
+libva-nvidia-driver                # VA-API implementation that uses NVDEC as a backend  !! NVIDIA GPU only — auto-detect?
+linux                              # The Linux kernel and modules
+linux-firmware                     # Firmware files for Linux - Default set
+mkinitcpio                         # Modular initramfs image creation utility
+mkvtoolnix-cli                     # Set of tools to create, edit and inspect Matroska files
+mpv                                # a free, open source, and cross-platform media player
+mullvad-vpn-daemon                 # Mullvad VPN client (daemon and CLI)
+nano                               # Pico editor clone with enhancements
+network-manager-applet             # Applet for managing network connections
+networkmanager                     # Network connection manager and user applications
+noto-fonts                         # Google Noto TTF fonts
+noto-fonts-cjk                     # Google Noto CJK fonts
+noto-fonts-emoji                   # Google Noto Color Emoji font
+noto-fonts-extra                   # Google Noto TTF fonts - additional variants
+npm                                # JavaScript package manager
+nss-mdns                           # glibc plugin providing host name resolution via mDNS
+nvidia-open                        # NVIDIA open kernel modules  !! NVIDIA GPU only — auto-detect?
+pacman-contrib                     # Contributed scripts and tools for pacman systems
+pam-u2f                            # Universal 2nd Factor (U2F) PAM authentication module from Yubico
+papirus-icon-theme                 # Papirus icon theme
+pipewire                           # Low-latency audio/video router and processor
+pipewire-alsa                      # Low-latency audio/video router and processor - ALSA configuration
+pipewire-jack                      # Low-latency audio/video router and processor - JACK replacement
+pipewire-pulse                     # Low-latency audio/video router and processor - PulseAudio replacement
+pnpm                               # Fast, disk space efficient package manager
+polkit-kde-agent                   # Daemon providing a polkit authentication UI for KDE
+postgresql                         # Sophisticated object-relational DBMS
+postgresql-libs                    # Sophisticated object-relational DBMS - Client binaries and libraries
+proton-vpn-cli                     # Official ProtonVPN CLI Linux app
+qt5-wayland                        # Provides APIs for Wayland
+qt6-quickeffectmaker               # Qt Quick Effect Maker (QQEM) for creating and editing custom shader effects
+qt6-wayland                        # Provides APIs for Wayland
+rofi                               # A window switcher, application launcher and dmenu replacement
+sddm                               # QML based X11 and Wayland display manager
+slurp                              # Select a region in a Wayland compositor
+smartmontools                      # Control and monitor S.M.A.R.T. enabled ATA and SCSI Hard Drives
+steam                              # Valve's digital software delivery system
+stow                               # Manage installation of multiple softwares in the same directory tree
+sudo                               # Give certain users the ability to run some commands as root
+swaync                             # A simple GTK based notification daemon for Sway
+tailscale                          # A mesh VPN that makes it easy to connect your devices, wherever they are.
+thunar                             # Modern, fast and easy-to-use file manager for Xfce
+thunar-archive-plugin              # Adds archive operations to the Thunar file context menus
+thunar-media-tags-plugin           # Adds special features for media files to the Thunar File Manager
+thunar-shares-plugin               # Thunar plugin to quickly share a folder using Samba without requiring root access
+thunar-volman                      # Automatic management of removable drives and media for Thunar
+ttf-dejavu                         # Font family based on the Bitstream Vera Fonts with a wider range of characters
+ttf-iosevka-nerd                   # Patched font Iosevka from nerd fonts library
+ttf-jetbrains-mono                 # Typeface for developers, by JetBrains
+ttf-jetbrains-mono-nerd            # Patched font JetBrains Mono from nerd fonts library
+ttf-liberation                     # Font family which aims at metric compatibility with Arial, Times New Roman, and Courier New
+ttf-material-icons                 # Material Design icons by Google (deprecated classic Material Icons static style)
+ttf-material-symbols-variable      # Material Design icons by Google (Material Symbols - 4 axis variable)
+ttf-noto-nerd                      # Patched font Noto from nerd fonts library
+tumbler                            # Thumbnail service implementing the thumbnail management D-Bus specification
+uv                                 # An extremely fast Python package installer and resolver written in Rust
+uwsm                               # A standalone Wayland session manager
+vim                                # Vi Improved, a highly configurable, improved version of the vi text editor
+#waybar                             # Highly customizable Wayland bar for Sway and Wlroots based compositors  !! you've switched to quickshell (waybar is commented out in startup.lua)
+webp-pixbuf-loader                 # WebM GDK Pixbuf Loader library
+wget                               # Network utility to retrieve files from the web
+wireplumber                        # Session / policy manager implementation for PipeWire
+wofi                               # launcher for wlroots-based wayland compositors  !! you also have rofi — need both?
+wpa_supplicant                     # A utility providing key negotiation for WPA wireless networks
+xarchiver                          # GTK frontend to various command line archivers
+xdg-desktop-portal-hyprland        # xdg-desktop-portal backend for hyprland
+xdg-utils                          # Command line tools that assist applications with a variety of desktop integration tasks
+xfce4-appfinder                    # Application launcher and finder  !! XFCE desktop leftover?
+xfce4-panel                        # Panel for the Xfce desktop environment  !! XFCE desktop leftover?
+xfce4-power-manager                # Power Manager for Xfce  !! XFCE desktop leftover?
+xfce4-session                      # Xfce's session manager  !! XFCE desktop leftover?
+xfce4-settings                     # Xfce's Configuration System  !! XFCE desktop leftover?
+xfce4-terminal                     # A modern terminal emulator primarily for the Xfce desktop environment  !! XFCE desktop leftover?
+xfdesktop                          # Xfce's desktop manager  !! XFCE desktop leftover?
+xfwm4                              # Xfce's window manager  !! XFCE desktop leftover?
+zram-generator                     # Systemd unit generator for zram devices
+zsh                                # A very advanced and programmable command interpreter (shell) for UNIX
+
+## ---------------- AUR (installed via yay) ----------------
+bitwarden-bin                      # A secure and free password manager for all of your devices.
+caelestia-shell                    # The desktop shell for the Caelestia dotfiles  !! alternative quickshell config, not used by your shell.qml
+flutter-bin                        # Cross platform widget toolkit for Dart (monolithic)
+google-chrome                      # The popular web browser by Google (Stable Channel)
+hyprmod                            # Native GTK4/libadwaita settings app for Hyprland
+jellyfin-desktop-debug             # Detached debugging symbols for jellyfin-desktop  !! debug symbols, not needed
+minecraft-launcher                 # Official Minecraft Launcher
+orbit-wifi                         # A WiFi/Bluetooth manager for Wayland with glassmorphism UI  !! removed from your config in commit 88484f8
+plex-desktop                       # Plex desktop client for linux
+plexamp-bin                        # Modern music client for Plex.(Prebuilt version.Use system-wide electron)
+puddletag                          # An audio tag editor for GNU/Linux
+pwvucontrol                        # Pipewire volume control for GNOME
+python-pywal                       # Generate and change colorschemes on the fly
+raw-thumbnailer                    # A lightweight and fast raw image thumbnailer that can be used by file managers.
+seafile-client                     # GUI client for synchronizing your local files with seafile server
+sunshine                           # Self-hosted game stream host for Moonlight
+svt-av1-essential-git              # A no-nonsense SVT-AV1 encoder fork with sensible defaults and Quality of Life improvements  !! -git build, check if still needed
+ttf-icomoon-feather                # Icomoon feather font
+tumbler-extra-thumbnailers         # Customized thumbnailers for Tumbler
+turritopsis                        # Desktop Jellyfin client with mpv playback
+vesktop                            # A standalone Electron-based Discord app with Vencord & improved Linux support
+visual-studio-code-bin             # Visual Studio Code (vscode)
+waypaper                           # GUI wallpaper setter for Wayland and Xorg window managers. It works as a frontend for popular wallpaper backends like swaybg, swww, wallutils, hyprpaper and feh.
+yay                                # Yet another yogurt. Pacman wrapper and AUR helper written in go.  !! bootstrapped by the script itself anyway
+yay-debug                          # Detached debugging symbols for yay  !! debug symbols, not needed
+zen-browser-bin                    # Official package for Zen, a privacy-focused, feature packed Firefox-based web browser
+
+## ---------------- Flatpak (Flathub) ----------------
+com.makemkv.MakeMKV                # MakeMKV
+org.jellyfin.JellyfinDesktop       # Jellyfin Desktop
+
+## ---------------- Manually installed binaries (~/.local/bin) ----------------
+## These aren't from a package manager; I'd install them via their official installers.
+claude                             # Claude Code CLI (official install script)
+oh-my-posh                         # Prompt theme engine (official install script; your theme is already in dotfiles)
+ffmpeg                             # Static ffmpeg build — !! duplicate, ffmpeg is also installed via pacman above
+python3.13                         # Standalone Python 3.13 — !! probably not needed, uv can provide Python

system/packages.txt

@@ -0,0 +1,197 @@
+# ============================================================================
+# Packages installed by bootstrap.sh on a new machine.
+#
+#   - One package per line; anything after "#" is a description.
+#   - Lines starting with "#" are skipped (left here for reference).
+#   - [section] lines tell bootstrap.sh which installer to use;
+#     [services] lists systemd units to enable.
+#
+# Not listed here (bootstrap.sh handles them itself):
+#   - CPU microcode and GPU drivers: auto-detected from the hardware
+#   - yay: bootstrapped from the AUR before the [aur] section
+#   - svt-av1-essential-git: optional, also rebuilds ffmpeg against it
+# ============================================================================
+
+[pacman]
+adw-gtk-theme                      # Unofficial GTK 3 port of the libadwaita theme
+# amd-ucode                          # Microcode update image for AMD CPUs  -- auto-detected by bootstrap.sh
+awww                               # An Answer to your Wayland Wallpaper Woes
+baobab                             # A graphical directory tree analyzer
+base                               # Minimal package set to define a basic Arch Linux installation
+base-devel                         # Basic tools to build Arch Linux packages
+blueman                            # GTK+ Bluetooth Manager
+bluez                              # Daemons for the bluetooth protocol stack
+bluez-utils                        # Development and debugging utilities for the bluetooth protocol stack
+btop                               # A monitor of system resources, bpytop ported to C++
+dolphin                            # KDE File Manager
+# dunst                              # Customizable and lightweight notification-daemon  !! you use swaync for notifications
+efibootmgr                         # Linux user-space application to modify the EFI Boot Manager
+fastfetch                          # A feature-rich and performance oriented neofetch like system information tool
+ffmpeg                             # Complete solution to record, convert and stream audio and video
+filezilla                          # Fast and reliable FTP, FTPS and SFTP client
+firefox                            # Fast, Private & Safe Web Browser
+flatpak                            # Linux application sandboxing and distribution framework (formerly xdg-app)
+foot                               # Fast, lightweight, and minimalistic Wayland terminal emulator
+fzf                                # Command-line fuzzy finder
+galculator                         # GTK based scientific calculator
+# garcon                            # Freedesktop.org compliant menu library  !! XFCE desktop leftover?
+gdu                                # Fast disk usage analyzer
+git                                # the fast distributed version control system
+gnome-calendar                     # Simple and beautiful calendar application designed to perfectly fit the GNOME desktop
+gnome-disk-utility                 # Disk Management Utility for GNOME
+gnome-font-viewer                  # A font viewer utility for GNOME
+gnome-keyring                      # Stores passwords and encryption keys
+gnome-text-editor                  # A simple text editor for the GNOME desktop
+grim                               # Screenshot utility for Wayland
+gst-plugin-pipewire                # Multimedia graph framework - pipewire plugin
+gvfs                               # Virtual filesystem implementation for GIO
+gvfs-smb                           # Virtual filesystem implementation for GIO - SMB/CIFS backend (Windows file sharing)
+htop                               # Interactive process viewer
+hypridle                           # hyprland’s idle daemon
+hyprland                           # a highly customizable dynamic tiling Wayland compositor
+hyprlock                           # hyprland’s GPU-accelerated screen locking utility
+hyprshot                           # Hyprland screenshot utility
+imv                                # Image viewer for Wayland and X11
+jq                                 # Command-line JSON processor
+# kitty                              # A modern, hackable, featureful, OpenGL-based terminal emulator  !! you use foot as terminal (kitty config not in dotfiles)
+libgsf                             # Extensible I/O abstraction library for dealing with structured file formats
+libmatroska                        # Matroska library
+libpulse                           # A featureful, general-purpose sound server (client library)
+# libva-nvidia-driver                # VA-API implementation that uses NVDEC as a backend  -- auto-detected by bootstrap.sh
+linux                              # The Linux kernel and modules
+linux-firmware                     # Firmware files for Linux - Default set
+mkinitcpio                         # Modular initramfs image creation utility
+mkvtoolnix-cli                     # Set of tools to create, edit and inspect Matroska files
+mpv                                # a free, open source, and cross-platform media player
+mullvad-vpn-daemon                 # Mullvad VPN client (daemon and CLI)
+nano                               # Pico editor clone with enhancements
+network-manager-applet             # Applet for managing network connections
+networkmanager                     # Network connection manager and user applications
+noto-fonts                         # Google Noto TTF fonts
+noto-fonts-cjk                     # Google Noto CJK fonts
+noto-fonts-emoji                   # Google Noto Color Emoji font
+noto-fonts-extra                   # Google Noto TTF fonts - additional variants
+npm                                # JavaScript package manager
+nss-mdns                           # glibc plugin providing host name resolution via mDNS
+# nvidia-open                        # NVIDIA open kernel modules  -- auto-detected by bootstrap.sh
+pacman-contrib                     # Contributed scripts and tools for pacman systems
+pam-u2f                            # Universal 2nd Factor (U2F) PAM authentication module from Yubico
+papirus-icon-theme                 # Papirus icon theme
+pipewire                           # Low-latency audio/video router and processor
+pipewire-alsa                      # Low-latency audio/video router and processor - ALSA configuration
+pipewire-jack                      # Low-latency audio/video router and processor - JACK replacement
+pipewire-pulse                     # Low-latency audio/video router and processor - PulseAudio replacement
+pnpm                               # Fast, disk space efficient package manager
+polkit-kde-agent                   # Daemon providing a polkit authentication UI for KDE
+postgresql                         # Sophisticated object-relational DBMS
+postgresql-libs                    # Sophisticated object-relational DBMS - Client binaries and libraries
+proton-vpn-cli                     # Official ProtonVPN CLI Linux app
+qt5-wayland                        # Provides APIs for Wayland
+qt6-quickeffectmaker               # Qt Quick Effect Maker (QQEM) for creating and editing custom shader effects
+qt6-wayland                        # Provides APIs for Wayland
+rofi                               # A window switcher, application launcher and dmenu replacement
+sddm                               # QML based X11 and Wayland display manager
+slurp                              # Select a region in a Wayland compositor
+smartmontools                      # Control and monitor S.M.A.R.T. enabled ATA and SCSI Hard Drives
+steam                              # Valve's digital software delivery system
+stow                               # Manage installation of multiple softwares in the same directory tree
+sudo                               # Give certain users the ability to run some commands as root
+swaync                             # A simple GTK based notification daemon for Sway
+tailscale                          # A mesh VPN that makes it easy to connect your devices, wherever they are.
+thunar                             # Modern, fast and easy-to-use file manager for Xfce
+thunar-archive-plugin              # Adds archive operations to the Thunar file context menus
+thunar-media-tags-plugin           # Adds special features for media files to the Thunar File Manager
+thunar-shares-plugin               # Thunar plugin to quickly share a folder using Samba without requiring root access
+thunar-volman                      # Automatic management of removable drives and media for Thunar
+ttf-dejavu                         # Font family based on the Bitstream Vera Fonts with a wider range of characters
+ttf-iosevka-nerd                   # Patched font Iosevka from nerd fonts library
+ttf-jetbrains-mono                 # Typeface for developers, by JetBrains
+ttf-jetbrains-mono-nerd            # Patched font JetBrains Mono from nerd fonts library
+ttf-liberation                     # Font family which aims at metric compatibility with Arial, Times New Roman, and Courier New
+ttf-material-icons                 # Material Design icons by Google (deprecated classic Material Icons static style)
+ttf-material-symbols-variable      # Material Design icons by Google (Material Symbols - 4 axis variable)
+ttf-noto-nerd                      # Patched font Noto from nerd fonts library
+tumbler                            # Thumbnail service implementing the thumbnail management D-Bus specification
+uv                                 # An extremely fast Python package installer and resolver written in Rust
+uwsm                               # A standalone Wayland session manager
+vim                                # Vi Improved, a highly configurable, improved version of the vi text editor
+# waybar                             # Highly customizable Wayland bar for Sway and Wlroots based compositors  !! you've switched to quickshell (waybar is commented out in startup.lua)
+webp-pixbuf-loader                 # WebM GDK Pixbuf Loader library
+wget                               # Network utility to retrieve files from the web
+wireplumber                        # Session / policy manager implementation for PipeWire
+# wofi                               # launcher for wlroots-based wayland compositors  !! you also have rofi — need both?
+wpa_supplicant                     # A utility providing key negotiation for WPA wireless networks
+xarchiver                          # GTK frontend to various command line archivers
+xdg-desktop-portal-hyprland        # xdg-desktop-portal backend for hyprland
+xdg-utils                          # Command line tools that assist applications with a variety of desktop integration tasks
+# xfce4-appfinder                    # Application launcher and finder  !! XFCE desktop leftover?
+# xfce4-panel                        # Panel for the Xfce desktop environment  !! XFCE desktop leftover?
+# xfce4-power-manager                # Power Manager for Xfce  !! XFCE desktop leftover?
+# xfce4-session                      # Xfce's session manager  !! XFCE desktop leftover?
+# xfce4-settings                     # Xfce's Configuration System  !! XFCE desktop leftover?
+# xfce4-terminal                     # A modern terminal emulator primarily for the Xfce desktop environment  !! XFCE desktop leftover?
+# xfdesktop                          # Xfce's desktop manager  !! XFCE desktop leftover?
+# xfwm4                              # Xfce's window manager  !! XFCE desktop leftover?
+zram-generator                     # Systemd unit generator for zram devices
+zsh                                # A very advanced and programmable command interpreter (shell) for UNIX
+
+# Used by the dotfiles, previously only pulled in by caelestia-shell / waybar
+brightnessctl                      # Backlight control (quickshell, hypr keybinds)
+cliphist                           # Clipboard history (wl-paste watcher in startup.lua)
+playerctl                          # Media key control
+power-profiles-daemon              # Power profiles (quickshell battery widget)
+wl-clipboard                       # wl-copy / wl-paste
+openssh                            # SSH client/server (sshd service, git over ssh)
+avahi                              # mDNS daemon (avahi-daemon service, used by nss-mdns)
+
+[aur]
+bitwarden-bin                      # A secure and free password manager for all of your devices.
+# caelestia-shell                    # The desktop shell for the Caelestia dotfiles  !! alternative quickshell config, not used by your shell.qml
+flutter-bin                        # Cross platform widget toolkit for Dart (monolithic)
+google-chrome                      # The popular web browser by Google (Stable Channel)
+hyprmod                            # Native GTK4/libadwaita settings app for Hyprland
+# jellyfin-desktop-debug             # Detached debugging symbols for jellyfin-desktop  !! debug symbols, not needed
+minecraft-launcher                 # Official Minecraft Launcher
+# orbit-wifi                         # A WiFi/Bluetooth manager for Wayland with glassmorphism UI  !! removed from your config in commit 88484f8
+plex-desktop                       # Plex desktop client for linux
+plexamp-bin                        # Modern music client for Plex.(Prebuilt version.Use system-wide electron)
+puddletag                          # An audio tag editor for GNU/Linux
+quickshell-git                     # The shell your bar/OSD run on (previously a caelestia-shell dependency)
+pwvucontrol                        # Pipewire volume control for GNOME
+python-pywal                       # Generate and change colorschemes on the fly
+raw-thumbnailer                    # A lightweight and fast raw image thumbnailer that can be used by file managers.
+seafile-client                     # GUI client for synchronizing your local files with seafile server
+sunshine                           # Self-hosted game stream host for Moonlight
+# svt-av1-essential-git              # A no-nonsense SVT-AV1 encoder fork with sensible defaults and Quality of Life improvements  -- optional step in bootstrap.sh (rebuilds ffmpeg)
+ttf-icomoon-feather                # Icomoon feather font
+tumbler-extra-thumbnailers         # Customized thumbnailers for Tumbler
+turritopsis                        # Desktop Jellyfin client with mpv playback
+vesktop                            # A standalone Electron-based Discord app with Vencord & improved Linux support
+visual-studio-code-bin             # Visual Studio Code (vscode)
+waypaper                           # GUI wallpaper setter for Wayland and Xorg window managers. It works as a frontend for popular wallpaper backends like swaybg, swww, wallutils, hyprpaper and feh.
+# yay                                # Yet another yogurt. Pacman wrapper and AUR helper written in go.  !! bootstrapped by the script itself anyway
+# yay-debug                          # Detached debugging symbols for yay  !! debug symbols, not needed
+zen-browser-bin                    # Official package for Zen, a privacy-focused, feature packed Firefox-based web browser
+
+[flatpak]
+com.makemkv.MakeMKV                # MakeMKV
+org.jellyfin.JellyfinDesktop       # Jellyfin Desktop
+
+[installer]  # official install scripts, see bootstrap.sh
+claude                             # Claude Code CLI (official install script)
+oh-my-posh                         # Prompt theme engine (official install script; your theme is already in dotfiles)
+# ffmpeg                             # Static ffmpeg build — !! duplicate, ffmpeg is also installed via pacman above
+# python3.13                         # Standalone Python 3.13 — !! probably not needed, uv can provide Python
+
+[services]  # enabled with systemctl, start on next boot
+NetworkManager.service             # Networking
+bluetooth.service                  # Bluetooth
+sddm.service                       # Login screen
+sshd.service                       # SSH server
+avahi-daemon.service               # mDNS / .local hostnames
+systemd-resolved.service           # DNS resolver (used by the VPNs)
+systemd-timesyncd.service          # Clock sync
+fstrim.timer                       # Weekly SSD trim
+tailscaled.service                 # Tailscale
+mullvad-daemon.service             # Mullvad VPN
+proton.VPN.service                 # Proton VPN

system/pacman/options.conf

@@ -0,0 +1,5 @@
+# Shared pacman [options], included from /etc/pacman.conf.
+# Installed to /etc/pacman.d/options.conf by system/install.sh.
+Color
+#ILoveCandy
+#VerbosePkgLists

system/rebuild-ffmpeg.sh

@@ -0,0 +1,27 @@
+#!/usr/bin/env bash
+# Rebuilds Arch's ffmpeg package from source so it links against the installed
+# svt-av1-essential-git instead of the repo svt-av1 it was built with.
+#
+# Re-run this after a `pacman -Syu` that updates ffmpeg, otherwise the repo
+# build replaces this one.
+set -euo pipefail
+
+if ! pacman -Qq svt-av1-essential-git >/dev/null 2>&1; then
+    echo "svt-av1-essential-git is not installed; nothing to rebuild against." >&2
+    exit 1
+fi
+
+build="$(mktemp -d)"
+trap 'rm -rf "$build"' EXIT
+
+git clone --depth 1 https://gitlab.archlinux.org/archlinux/packaging/packages/ffmpeg.git "$build/ffmpeg"
+cd "$build/ffmpeg"
+
+# The PKGBUILD verifies a signed ffmpeg tag; makepkg won't fetch the keys itself
+mapfile -t keys < <(source ./PKGBUILD && printf '%s\n' "${validpgpkeys[@]}")
+if (( ${#keys[@]} )); then
+    gpg --keyserver hkps://keyserver.ubuntu.com --recv-keys "${keys[@]}"
+fi
+
+# No --needed: the version matches what's installed, we want it replaced anyway
+makepkg --syncdeps --install --cleanbuild --noconfirm