Merge branch 'features/adding_quickshell' of ssh://gitea.thomasleewilliams.co.uk:2222/thomas/dotfiles into features/adding_quickshell

Reviewed-on: #5

README.md

@@ -26,6 +26,26 @@ My dotfiles, a constantly evolving set of configurations which I arguably spend
 too much time tweaking, but they make the command line feel like home, so here
 we are.
 
+## 🖥️ Installation
+
+In order to apply these dotfiles, you must have the SSH Key stored in your password manager, 
+then connect the SSH-Agent to your shell. Once that is done, you will need the application 
+**Stow** in order to keep it synced.
+
+After this, you will need to git clone the repo in the Projects directory
+
+```console
+mkdir Projects
+git clone ssh://git@gitea.thomasleewilliams.co.uk:2222/thomas/dotfiles.git
+```
+
+Once that is complete, run this command:
+```console
+stow -d ~/Projects/dotfiles/ -t ~/ dotfiles
+```
+
+This will sync wallpapers/config files to where they are usually located
+
 ## 📦 Programs
 
 List of programs and tools I use.
@@ -39,7 +59,7 @@ List of programs and tools I use.
 |📁 File Manager    | [thunar](https://wiki.archlinux.org/title/Thunar)     |
 |📝 Editor          | [vs code](https://github.com/microsoft/vscode) / [neovim (changing to soon)](https://github.com/neovim/neovim)    |
 |🌐 Browser         | [zen](https://github.com/zen-browser/desktop) / [firefox](https://github.com/topics/firefox-browser) / [startpage](https://blog-bucket-personal.s3.eu-west-2.amazonaws.com/Screenshot_02-May_08-44-23_6614.png) |
-|📊 Bar             | [waybar](https://github.com/Alexays/Waybar)      |
+|📊 Bar             | [waybar](https://github.com/Alexays/Waybar) / [quickshell](https://quickshell.org/)     | 
 |🚀 Launcher        | [rofi](https://github.com/davatorium/rofi)          |
 |🔒 Lockscreen      | [hyprlock](https://github.com/hyprwm/hyprlock)  |
 |🚪 Login Menu      | [sddm](https://github.com/sddm/sddm)          |

dotfiles/.config/gtk-3.0/bookmarks

@@ -1,3 +1,4 @@
+file:///home/thomas/Projects
 file:///home/thomas/Documents
 file:///home/thomas/Downloads
 file:///home/thomas/Pictures

dotfiles/.config/hypr/appearance/animations.lua

@@ -0,0 +1,34 @@
+-- HyprFlux — https://github.com/ahmad9059/HyprFlux
+-- Ported from UserConfigs/UserAnimations.conf (the active preset)
+--
+-- The 14 alternative presets from animations/*.conf were also ported, flat, as
+-- anim-*.lua (see the plan) — none of them are wired in. They now live in ../presets/.
+-- To switch styles, replace the body of this file with `require("presets.anim-<preset>")`,
+-- e.g. require("presets.anim-ml4w-classic").
+
+hl.config({
+    animations = {
+        enabled = true,
+    },
+})
+
+hl.curve("wind",      { type = "bezier", points = { { 0.05, 0.9 },  { 0.1, 1.05 } } })
+hl.curve("winIn",     { type = "bezier", points = { { 0.1, 1.1 },   { 0.1, 1.1 } } })
+hl.curve("winOut",    { type = "bezier", points = { { 0.3, -0.3 },  { 0, 1 } } })
+hl.curve("liner",     { type = "bezier", points = { { 1, 1 },       { 1, 1 } } })
+hl.curve("overshot",  { type = "bezier", points = { { 0.05, 0.9 },  { 0.1, 1.05 } } })
+hl.curve("smoothOut", { type = "bezier", points = { { 0.5, 0 },     { 0.99, 0.99 } } })
+hl.curve("smoothIn",  { type = "bezier", points = { { 0.5, -0.5 },  { 0.68, 1.5 } } })
+
+hl.animation({ leaf = "windows",     enabled = true, speed = 6, bezier = "wind",      style = "slide" })
+hl.animation({ leaf = "windowsIn",   enabled = true, speed = 5, bezier = "winIn",     style = "slide" })
+hl.animation({ leaf = "windowsOut",  enabled = true, speed = 3, bezier = "smoothOut", style = "slide" })
+hl.animation({ leaf = "windowsMove", enabled = true, speed = 5, bezier = "wind",      style = "slide" })
+hl.animation({ leaf = "border",      enabled = true, speed = 1,   bezier = "liner" })
+hl.animation({ leaf = "borderangle", enabled = true, speed = 100, bezier = "liner", style = "loop" }) -- used by rainbow borders and rotating colors; speed clamped from 180 -> Lua hl.animation caps speed at 100
+hl.animation({ leaf = "fade",        enabled = true, speed = 3, bezier = "smoothOut" })
+hl.animation({ leaf = "workspaces",  enabled = true, speed = 5, bezier = "overshot" })
+
+-- animations for -git or version >0.42.0
+hl.animation({ leaf = "workspacesIn",  enabled = true, speed = 5, bezier = "winIn",  style = "slide" })
+hl.animation({ leaf = "workspacesOut", enabled = true, speed = 5, bezier = "winOut", style = "slide" })

dotfiles/.config/hypr/appearance/colors.lua

@@ -0,0 +1,26 @@
+-- HyprFlux — https://github.com/ahmad9059/HyprFlux
+-- HyprFlux static color palette
+-- Ported from colours/hyprflux-colors.conf
+
+local M = {}
+
+M.background = "rgb(010102)"
+M.foreground = "rgb(FDF8FE)"
+M.color0     = "rgb(313131)"
+M.color1     = "rgb(09050C)"
+M.color2     = "rgb(221647)"
+M.color3     = "rgb(2C1A40)"
+M.color4     = "rgb(5E3887)"
+M.color5     = "rgb(7344A6)"
+M.color6     = "rgb(BAB0BD)"
+M.color7     = "rgb(F3ECF5)"
+M.color8     = "rgb(AAA5AC)"
+M.color9     = "rgb(0B0711)"
+M.color10    = "rgb(2D1D5F)"
+M.color11    = "rgb(3B2355)"
+M.color12    = "rgb(7D4AB4)"
+M.color13    = "rgb(9A5BDD)"
+M.color14    = "rgb(F8EAFC)"
+M.color15    = "rgb(F3ECF5)"
+
+return M

dotfiles/.config/hypr/appearance/decorations.lua

@@ -0,0 +1,65 @@
+-- HyprFlux — https://github.com/ahmad9059/HyprFlux
+-- Decoration Settings
+-- Ported from UserConfigs/UserDecorations.conf
+--
+-- Hyprland Wiki Links
+-- Animation - https://wiki.hyprland.org/Configuring/Animations/
+-- Decoration - https://wiki.hyprland.org/Configuring/Variables/#decoration
+
+local colors = require("appearance.colors")
+
+hl.config({
+    general = {
+        border_size = 2,
+        gaps_in = 2,
+        gaps_out = 4,
+
+        col = {
+            active_border   = colors.color12,
+            inactive_border = colors.color10,
+        },
+    },
+
+    decoration = {
+        rounding = 10,
+
+        active_opacity     = 1.0,
+        inactive_opacity    = 0.9,
+        fullscreen_opacity  = 1.0,
+
+        dim_inactive = true,
+        dim_strength = 0.1,
+        dim_special  = 0.8,
+
+        shadow = {
+            enabled      = false,
+            range        = 3,
+            render_power = 1,
+
+            color          = colors.color12,
+            color_inactive = colors.color10,
+        },
+
+        blur = {
+            enabled            = true,
+            size               = 6,
+            passes             = 2,
+            ignore_opacity     = true,
+            new_optimizations  = true,
+            special            = true,
+            popups             = true,
+        },
+    },
+
+    group = {
+        col = {
+            border_active = colors.color15,
+        },
+
+        groupbar = {
+            col = {
+                active = colors.color0,
+            },
+        },
+    },
+})

dotfiles/.config/hypr/core/env.lua

@@ -0,0 +1,87 @@
+-- HyprFlux — https://github.com/ahmad9059/HyprFlux
+-- Environment variables. See https://wiki.hypr.land/Configuring/Advanced-and-Cool/Environment-variables/
+-- Ported from UserConfigs/ENVariables.conf
+
+-- Toolkit Backend Variables
+hl.env("GDK_BACKEND", "wayland,x11,*")
+hl.env("QT_QPA_PLATFORM", "wayland;xcb")
+hl.env("CLUTTER_BACKEND", "wayland")
+
+-- Run SDL2 applications on Wayland.
+-- Remove or set to x11 if games that provide older versions of SDL cause compatibility issues
+-- hl.env("SDL_VIDEODRIVER", "wayland")
+
+-- xdg Specifications
+hl.env("XDG_CURRENT_DESKTOP", "Hyprland")
+hl.env("XDG_SESSION_DESKTOP", "Hyprland")
+hl.env("XDG_SESSION_TYPE", "wayland")
+
+-- QT Variables
+hl.env("QT_AUTO_SCREEN_SCALE_FACTOR", "1")
+hl.env("QT_WAYLAND_DISABLE_WINDOWDECORATION", "1")
+hl.env("QT_QPA_PLATFORMTHEME", "qt5ct")
+hl.env("QT_QPA_PLATFORMTHEME", "qt6ct")
+
+-- hyprland-qt-support
+hl.env("QT_QUICK_CONTROLS_STYLE", "org.hyprland.style")
+
+-- xwayland apps scale fix (useful if you use monitor scaling).
+-- Set same value if you use scaling in monitors.lua
+-- 1 is 100% 1.5 is 150%
+-- see https://wiki.hyprland.org/Configuring/XWayland/
+hl.env("GDK_SCALE", "1")
+hl.env("QT_SCALE_FACTOR", "1")
+
+-- Bibata-Modern-Ice-Cursor
+-- NOTE! You must have the hyprcursor version to activate this.
+-- https://wiki.hyprland.org/Hypr-Ecosystem/hyprcursor/
+hl.env("HYPRCURSOR_THEME", "Bibata-Modern-Classic")
+hl.env("HYPRCURSOR_SIZE", "24")
+
+-- firefox
+hl.env("MOZ_ENABLE_WAYLAND", "1")
+
+-- electron >28 apps (may help) ##
+-- https://www.electronjs.org/docs/latest/api/environment-variables
+hl.env("ELECTRON_OZONE_PLATFORM_HINT", "auto") -- auto selects Wayland if possible, X11 otherwise
+
+-- NVIDIA
+-- This is from the Hyprland wiki. Uncomment below if an nvidia GPU is detected.
+-- See hyprland wiki https://wiki.hyprland.org/Nvidia/#environment-variables
+
+-- hl.env("LIBVA_DRIVER_NAME", "nvidia")
+-- hl.env("__GLX_VENDOR_LIBRARY_NAME", "nvidia")
+-- hl.env("NVD_BACKEND", "direct")
+-- hl.env("GSK_RENDERER", "ngl")
+
+-- additional ENV's for nvidia. Caution, activate with care
+-- hl.env("GBM_BACKEND", "nvidia-drm")
+
+-- hl.env("__GL_GSYNC_ALLOWED", "1") -- adaptive Vsync
+-- hl.env("__NV_PRIME_RENDER_OFFLOAD", "1")
+-- hl.env("__VK_LAYER_NV_optimus", "NVIDIA_only")
+-- hl.env("WLR_DRM_NO_ATOMIC", "1")
+
+-- FOR VM and POSSIBLY NVIDIA
+-- LIBGL_ALWAYS_SOFTWARE software mesa rendering
+-- hl.env("LIBGL_ALWAYS_SOFTWARE", "1") -- Warning. May cause hyprland to crash
+-- hl.env("WLR_RENDERER_ALLOW_SOFTWARE", "1")
+
+-- nvidia firefox (for hardware acceleration on FF)?
+-- check this post https://github.com/elFarto/nvidia-vaapi-driver#configuration
+-- hl.env("MOZ_DISABLE_RDD_SANDBOX", "1")
+-- hl.env("EGL_PLATFORM", "wayland")
+
+---- Aquamarine Environment Variables ---- ( Hyprland > 0.45 )
+-- https://wiki.hyprland.org/Configuring/Environment-variables/#aquamarine-environment-variables
+-- hl.env("AQ_TRACE", "1") -- Enables more verbose logging.
+-- hl.env("AQ_DRM_DEVICES", "/dev/dri/card1:/dev/dri/card0") -- explicit list of DRM devices (GPUs) to use.
+-- hl.env("AQ_MGPU_NO_EXPLICIT", "1") -- Disables explicit syncing on mgpu buffers
+-- hl.env("AQ_NO_MODIFIERS", "1") -- Disables modifiers for DRM buffers
+
+---- Hyprland Environment Variables ----
+-- https://wiki.hyprland.org/Configuring/Environment-variables/#hyprland-environment-variables
+-- hl.env("HYPRLAND_TRACE", "1") -- Enables more verbose logging.
+-- hl.env("HYPRLAND_NO_RT", "1") -- Disables realtime priority setting by Hyprland.
+-- hl.env("HYPRLAND_NO_SD_NOTIFY", "1") -- If systemd, disables the 'sd_notify' calls.
+-- hl.env("HYPRLAND_NO_SD_VARS", "1") -- Disables management of variables in systemd and dbus activation environments.

dotfiles/.config/hypr/core/hyprmod.lua

@@ -0,0 +1,29 @@
+-- Generated by HyprMod
+-- Ported from hyprland-gui.conf
+--
+-- HyprMod isn't currently installed on this machine, so this is a straight syntax port of
+-- whatever it last wrote. If you reinstall HyprMod, prefer letting its own "Migrate to Lua…"
+-- wizard take over managing this file instead of hand-editing it going forward.
+
+hl.config({
+    general = {
+        allow_tearing = true,
+        snap = {
+            enabled = false,
+        },
+    },
+    misc = {
+        vrr = 1,
+    },
+})
+
+-- Monitors
+hl.monitor({ output = "DP-2", mode = "1920x1080@165.00Hz", position = "0x0", scale = 1, bitdepth = 10, cm = "wide" })
+
+-- Keybinds
+-- (unbind = SUPER SHIFT, Print / unbind = SUPER, up from the source .conf have no Lua equivalent needed —
+-- we just don't define a conflicting bind elsewhere; SUPER + up -> movefocus u below is otherwise identical
+-- to the one already in keybinds.lua, kept here too for parity with the original file)
+hl.bind("SUPER + Print", hl.dsp.exec_cmd("hyprshot -o " .. os.getenv("HOME") .. "/Pictures/Screenshots-Linux -m region"))
+hl.bind("SUPER + up", hl.dsp.focus({ direction = "u" }))
+hl.bind("SUPER + SHIFT + Print", hl.dsp.exec_cmd("hyprshot -o " .. os.getenv("HOME") .. "/Pictures/Screenshots-Linux -m window"))

dotfiles/.config/hypr/core/settings.lua

@@ -0,0 +1,120 @@
+-- HyprFlux — https://github.com/ahmad9059/HyprFlux
+-- User Settings
+-- Ported from UserConfigs/UserSettings.conf
+--
+-- refer to Hyprland wiki for more info https://wiki.hyprland.org/Configuring/Variables/
+-- NOTE: some settings are in animations.lua / decorations.lua
+
+hl.config({
+    dwindle = {
+        preserve_split = true,
+        -- smart_split = true,
+        special_scale_factor = 1,
+    },
+
+    master = {
+        new_status = "master",
+        new_on_top = true,
+        mfact = 0.5,
+    },
+
+    general = {
+        resize_on_border = true,
+        layout = "dwindle",
+    },
+
+    input = {
+        kb_layout  = "gb",
+        kb_variant = "",
+        kb_model   = "",
+        kb_options = "",
+        kb_rules   = "",
+        repeat_rate  = 50,
+        repeat_delay = 300,
+        sensitivity = 0.6, -- mouse sensitivity
+        -- accel_profile = "", -- flat or adaptive or blank or EMPTY means libinput's default mode
+        numlock_by_default = true,
+        left_handed = false,
+        follow_mouse = 1,
+        float_switch_override_focus = false,
+
+        touchpad = {
+            disable_while_typing    = true,
+            natural_scroll          = true,
+            clickfinger_behavior    = false,
+            middle_button_emulation = false,
+            tap_to_click            = true,
+            drag_lock               = false,
+        },
+
+        -- below for devices with touchdevice ie. touchscreen
+        touchdevice = {
+            enabled = true,
+        },
+
+        -- below is for tablet, see link above for proper variables
+        tablet = {
+            transform   = 0,
+            left_handed = false,
+        },
+    },
+
+    -- "gestures" here only holds the tuning knobs. workspace_swipe/workspace_swipe_fingers
+    -- were removed from this category upstream in favor of hl.gesture() (see below) — and
+    -- were already commented out in the source .conf, so the swipe gesture itself stays
+    -- disabled here too, ported as-is.
+    gestures = {
+        workspace_swipe_distance            = 500,
+        workspace_swipe_invert              = true,
+        workspace_swipe_min_speed_to_force  = 30,
+        workspace_swipe_cancel_ratio        = 0.5,
+        workspace_swipe_create_new          = true,
+        workspace_swipe_forever             = true,
+        -- workspace_swipe_use_r = true, -- uncomment if wanted a forever create a new workspace with swipe right
+    },
+
+    misc = {
+        disable_hyprland_logo      = true,
+        disable_splash_rendering   = true,
+        vrr = 2,
+        mouse_move_enables_dpms    = true,
+        enable_swallow             = false,
+        swallow_regex              = "^(kitty)$",
+        focus_on_activate          = false,
+        initial_workspace_tracking = 0,
+        middle_click_paste         = false,
+        enable_anr_dialog          = true, -- Application not Responding (ANR)
+        anr_missed_pings           = 15,   -- ANR Threshold default 1 is too low
+    },
+
+    -- opengl = {
+    --   nvidia_anti_flicker = true,
+    -- },
+
+    binds = {
+        workspace_back_and_forth = true,
+        allow_workspace_cycles   = true,
+        pass_mouse_when_bound    = false,
+    },
+
+    -- Could help when scaling and not pixelating
+    xwayland = {
+        enabled            = true,
+        force_zero_scaling = true,
+    },
+
+    render = {
+        direct_scanout = false,
+    },
+
+    cursor = {
+        sync_gsettings_theme    = true,
+        no_hardware_cursors     = 2, -- change to 1 if you want to disable
+        enable_hyprcursor       = true,
+        warp_on_change_workspace = 2,
+        no_warps                = true,
+    },
+})
+
+-- Uncomment to actually enable the touchpad workspace-swipe gesture (see the note above):
+-- hl.gesture({ fingers = 3, direction = "horizontal", action = "workspace" })

dotfiles/.config/hypr/core/startup.lua

@@ -0,0 +1,52 @@
+-- HyprFlux — https://github.com/ahmad9059/HyprFlux
+-- Commands and Apps to be executed at launch
+-- Ported from UserConfigs/Startup_Apps.conf
+-- See https://wiki.hypr.land/Configuring/Basics/Autostart/
+
+local scriptsDir = os.getenv("HOME") .. "/.config/hypr/scripts"
+
+hl.on("hyprland.start", function()
+    -- wallpaper stuff
+    hl.exec_cmd("awww-daemon --format xrgb")
+    -- hl.exec_cmd("mpvpaper '*' -o \"load-scripts=no no-audio --loop\" $livewallpaper")
+
+    -- Startup
+    hl.exec_cmd("dbus-update-activation-environment --systemd WAYLAND_DISPLAY XDG_CURRENT_DESKTOP")
+    hl.exec_cmd("systemctl --user import-environment WAYLAND_DISPLAY XDG_CURRENT_DESKTOP")
+
+    -- Polkit (Polkit Gnome / KDE)
+    hl.exec_cmd(scriptsDir .. "/Polkit.sh")
+
+    -- startup apps
+    hl.exec_cmd("nm-applet --indicator")
+    hl.exec_cmd("swaync")
+    -- hl.exec_cmd("ags")
+    -- hl.exec_cmd("blueman-applet")
+    -- hl.exec_cmd("rog-control-center")
+    hl.exec_cmd("waybar")
+    hl.exec_cmd("qs") -- quickshell AGS Desktop Overview alternative
+
+    -- clipboard manager
+    hl.exec_cmd("wl-paste --type text --watch cliphist store")
+    hl.exec_cmd("wl-paste --type image --watch cliphist store")
+
+    -- Starting hypridle to start hyprlock
+    hl.exec_cmd("hypridle")
+
+    -- Float + center the Bitwarden extension pop-out (window rules can't catch it — see the script)
+    hl.exec_cmd(scriptsDir .. "/FloatBitwardenPopup.sh")
+
+    hl.dispatch(hl.dsp.focus({ workspace = 3 }))
+
+    -- NOTE: the trailing "&&" here is a stray leftover from the original .conf (dangling, does nothing) — ported as-is
+    hl.exec_cmd("/usr/bin/Plexamp.AppImage &&")
+    hl.exec_cmd("sleep 3 && vesktop")
+    hl.dispatch(hl.dsp.focus({ workspace = 1 }))
+    hl.exec_cmd("bitwarden-desktop --ozone-platform-hint=auto --silent")
+
+    -- Here are a list of features available but disabled by default
+    -- hl.exec_cmd("awww-daemon --format xrgb && awww img " .. os.getenv("HOME") .. "/Pictures/wallpapers/mecha-nostalgia.png") -- persistent wallpaper
+
+    -- xdg-desktop-portal-hyprland (should be auto starting. However, you can force to start)
+    -- hl.exec_cmd(scriptsDir .. "/PortalHyprland.sh")
+end)

dotfiles/.config/hypr/hyprland-gui.conf

@@ -10,6 +10,6 @@ monitor = DP-2, 1920x1080@165.00Hz, 0x0, 1, bitdepth, 10, cm, wide
 # Keybinds
 unbind = SUPER SHIFT, Print
 unbind = SUPER, up
-bind = SUPER, Print, exec, hyprshot -o $HOME/Pictures/Screenshots -m region
+bind = SUPER, Print, exec, hyprshot -o $HOME/Pictures/Screenshots-Linux -m region
 bind = SUPER, up, movefocus, u
-bind = SUPER SHIFT, Print, exec, hyprshot -o $HOME/Pictures/Screenshots -m window
+bind = SUPER SHIFT, Print, exec, hyprshot -o $HOME/Pictures/Screenshots-Linux -m window

dotfiles/.config/hypr/hyprland.lua

@@ -0,0 +1,42 @@
+-- HyprFlux — https://github.com/ahmad9059/HyprFlux
+-- Ported from hyprland.conf — see https://wiki.hyprland.org/
+--
+-- This mirrors the old source= chain 1:1, just as require()'d Lua modules instead
+-- of hyprlang includes. See each file for its origin. The presets/ preset library
+-- (anim-*.lua) is also ported but intentionally not required from here — only the
+-- currently-active style (appearance/animations.lua) is wired in, exactly like before.
+--
+-- Modules live in subfolders sorted by concern (core/, appearance/, layout/, input/,
+-- presets/) — require() paths below use dotted module names, which Lua resolves to
+-- the matching subfolder (e.g. require("core.env") -> core/env.lua).
+
+-- Initial boot script: applies initial wallpapers, theming, new settings etc.
+-- suggest not changing/deleting this, including the reference file at ~/.config/hypr/.initial_startup_done
+-- as long as that reference file is present, initial-boot.sh will not execute
+hl.on("hyprland.start", function()
+    hl.exec_cmd(os.getenv("HOME") .. "/.config/hypr/initial-boot.sh")
+end)
+
+-- ## This is where you want to start tinkering
+require("core.startup")        -- put your start-up packages in core/startup.lua
+require("core.env")            -- Environment variables to load
+require("layout.windowrules")  -- all about Hyprland Window Rules and Layer Rules
+require("appearance.decorations") -- Decorations config
+require("appearance.animations")  -- Animation config
+require("input.keybinds")      -- Put your own keybinds here
+require("core.settings")       -- Main Hyprland Settings
+
+-- nwg-displays / hyprdynamicmonitors
+require("layout.monitors")
+require("layout.workspaces")
+
+-- NOTE: the original hyprland.conf used a plain `exec` (not `exec-once`) here, so it
+-- re-ran on every `hyprctl reload`, not just at startup. hl.on("hyprland.start", ...)
+-- only fires once at actual compositor start — close enough for a one-shot gsettings
+-- call, but worth knowing if you relied on the reload-time re-apply.
+hl.on("hyprland.start", function()
+    hl.exec_cmd("gsettings set org.gnome.desktop.interface cursor-theme Future-black Cursors")
+end)
+
+-- HyprMod managed settings
+require("core.hyprmod")

dotfiles/.config/hypr/input/keybinds.lua

@@ -0,0 +1,176 @@
+-- HyprFlux — https://github.com/ahmad9059/HyprFlux
+-- Ported from UserConfigs/Keybinds.conf
+-- See https://wiki.hypr.land/Configuring/Basics/Binds/ and .../Basics/Dispatchers/
+
+local mainMod    = "SUPER"
+local scriptsDir = os.getenv("HOME") .. "/.config/hypr/scripts"
+local userScripts = os.getenv("HOME") .. "/.config/hypr/UserScripts"
+
+-- settings for user default apps
+local edit = os.getenv("EDITOR") or "nvim"
+
+-- These two are for UserKeybinds.conf & Waybar Modules
+local term  = "foot"    -- Terminal
+local files = "thunar"  -- File Manager
+
+-- Default Search Engine for ROFI Search (SUPER S)
+local searchEngine = "https://www.google.com/search?q={}"
+
+-- common shortcuts
+hl.bind(mainMod .. " + SPACE", hl.dsp.exec_cmd(".config/rofi/launchers/type-4/launcher.sh")) -- desktop overview (if installed)
+hl.bind(mainMod .. " + Q", hl.dsp.window.close()) -- close active (not kill)
+hl.bind(mainMod .. " + SHIFT + Q", hl.dsp.exec_cmd(scriptsDir .. "/KillActiveProcess.sh")) -- Kill active process
+hl.bind(mainMod .. " + Return", hl.dsp.exec_cmd(term)) -- terminal
+hl.bind(mainMod .. " + F", hl.dsp.exec_cmd(files)) -- file manager
+hl.bind(mainMod .. " + B", hl.dsp.exec_cmd("zen-browser")) -- Launch Zen Browser New Everytime
+hl.bind(mainMod .. " + V", hl.dsp.exec_cmd(scriptsDir .. "/ClipManager.sh")) -- Clipboard Manager
+hl.bind(mainMod .. " + C", hl.dsp.exec_cmd("code --ozone-platform=x11")) -- Visual Studio Code
+hl.bind(mainMod .. " + O", hl.dsp.exec_cmd("obsidian --ozone-platform=x11")) -- Obsidian
+hl.bind(mainMod .. " + X", hl.dsp.exec_cmd("vesktop")) -- Vesktop(Discord)
+hl.bind(mainMod .. " + M", hl.dsp.exec_cmd("fdm")) -- Free Download Manager
+hl.bind(mainMod .. " + W", hl.dsp.exec_cmd("waypaper")) -- Wayland Wallpaper Setter
+hl.bind(mainMod .. " + L", hl.dsp.exec_cmd("hyprlock")) -- Screen Locker
+hl.bind(mainMod .. " + DELETE", hl.dsp.exec_cmd("~/.config/rofi/powermenu/type-2/powermenu.sh")) -- Power Menu
+hl.bind(mainMod .. " + S", hl.dsp.exec_cmd("cd /home/thomas/hyprmod && uv run hyprmod")) -- Hyprmod - A Hyprland settings manager (if installed)
+hl.bind(mainMod .. " + SHIFT + R", hl.dsp.exec_cmd(scriptsDir .. "/Refresh.sh")) -- Refresh waybar, swaync, rofirrr
+hl.bind(mainMod .. " + N", hl.dsp.exec_cmd("swaync-client -t -sw")) -- swayNC notification panel
+
+-- FEATURES / EXTRAS
+hl.bind(mainMod .. " + SHIFT + F", hl.dsp.window.fullscreen({ mode = "fullscreen" })) -- whole full screen
+hl.bind(mainMod .. " + SHIFT + SPACE", hl.dsp.window.float({ action = "toggle" })) -- Float Mode
+
+-- Desktop zooming or magnifier
+hl.bind(mainMod .. " + ALT + mouse_down", hl.dsp.exec_cmd([[hyprctl keyword cursor:zoom_factor "$(hyprctl getoption cursor:zoom_factor | awk 'NR==1 {factor = $2; if (factor < 1) {factor = 1}; print factor * 2.0}')"]]))
+hl.bind(mainMod .. " + ALT + mouse_up", hl.dsp.exec_cmd([[hyprctl keyword cursor:zoom_factor "$(hyprctl getoption cursor:zoom_factor | awk 'NR==1 {factor = $2; if (factor < 1) {factor = 1}; print factor / 2.0}')"]]))
+
+-- Waybar / Bar related
+hl.bind(mainMod .. " + CTRL + ALT + B", hl.dsp.exec_cmd("pkill -SIGUSR1 waybar")) -- Toggle hide/show waybar
+
+-- FEATURES / EXTRAS (UserScripts)
+hl.bind(mainMod .. " + SHIFT + A", hl.dsp.exec_cmd(scriptsDir .. "/Animations.sh")) -- hyprland animations menu
+hl.bind(mainMod .. " + SHIFT + Z", hl.dsp.exec_cmd(userScripts .. "/ZshChangeTheme.sh")) -- Change oh-my-zsh theme
+
+--------------------------------------------------------------------------------------
+-- Default Keybinds
+--------------------------------------------------------------------------------------
+
+hl.bind("CTRL + ALT + Delete", hl.dsp.exit()) -- exit Hyprland
+
+-- Master Layout
+hl.bind(mainMod .. " + CTRL + D", hl.dsp.layout("removemaster"))
+hl.bind(mainMod .. " + I", hl.dsp.layout("addmaster"))
+hl.bind(mainMod .. " + J", hl.dsp.layout("cyclenext"))
+hl.bind(mainMod .. " + K", hl.dsp.layout("cycleprev"))
+hl.bind(mainMod .. " + CTRL + Return", hl.dsp.layout("swapwithmaster"))
+
+-- Dwindle Layout
+hl.bind(mainMod .. " + P", hl.dsp.window.pseudo()) -- dwindle
+
+-- Special Keys / Hot Keys
+hl.bind("XF86AudioRaiseVolume", hl.dsp.exec_cmd(scriptsDir .. "/Volume.sh --inc"), { repeating = true, locked = true }) -- volume up
+hl.bind("XF86AudioLowerVolume", hl.dsp.exec_cmd(scriptsDir .. "/Volume.sh --dec"), { repeating = true, locked = true }) -- volume down
+hl.bind("XF86AudioMicMute", hl.dsp.exec_cmd(scriptsDir .. "/Volume.sh --toggle-mic"), { locked = true }) -- mic mute
+hl.bind("XF86AudioMute", hl.dsp.exec_cmd(scriptsDir .. "/Volume.sh --toggle"), { locked = true }) -- mute
+hl.bind("XF86Sleep", hl.dsp.exec_cmd("systemctl suspend"), { locked = true }) -- sleep button
+hl.bind("XF86RFKill", hl.dsp.exec_cmd(scriptsDir .. "/AirplaneMode.sh"), { locked = true }) -- Airplane mode
+
+-- media controls using keyboards
+hl.bind("XF86MediaPlayPause", hl.dsp.exec_cmd(scriptsDir .. "/MediaCtrl.sh --pause"), { locked = true })
+hl.bind("XF86AudioPause", hl.dsp.exec_cmd(scriptsDir .. "/MediaCtrl.sh --pause"), { locked = true })
+hl.bind("XF86AudioPlay", hl.dsp.exec_cmd(scriptsDir .. "/MediaCtrl.sh --pause"), { locked = true })
+hl.bind("XF86AudioNext", hl.dsp.exec_cmd(scriptsDir .. "/MediaCtrl.sh --nxt"), { locked = true })
+hl.bind("XF86AudioPrev", hl.dsp.exec_cmd(scriptsDir .. "/MediaCtrl.sh --prv"), { locked = true })
+hl.bind("XF86AudioStop", hl.dsp.exec_cmd(scriptsDir .. "/MediaCtrl.sh --stop"), { locked = true })
+
+-- Resize windows
+hl.bind(mainMod .. " + SHIFT + left",  hl.dsp.window.resize({ x = -50, y = 0, relative = true }),  { repeating = true })
+hl.bind(mainMod .. " + SHIFT + right", hl.dsp.window.resize({ x = 50,  y = 0, relative = true }),  { repeating = true })
+hl.bind(mainMod .. " + SHIFT + up",    hl.dsp.window.resize({ x = 0,   y = -50, relative = true }), { repeating = true })
+hl.bind(mainMod .. " + SHIFT + down",  hl.dsp.window.resize({ x = 0,   y = 50, relative = true }),  { repeating = true })
+
+-- Move windows
+hl.bind(mainMod .. " + CTRL + left",  hl.dsp.window.move({ direction = "l" }))
+hl.bind(mainMod .. " + CTRL + right", hl.dsp.window.move({ direction = "r" }))
+hl.bind(mainMod .. " + CTRL + up",    hl.dsp.window.move({ direction = "u" }))
+hl.bind(mainMod .. " + CTRL + down",  hl.dsp.window.move({ direction = "d" }))
+
+-- Swap windows
+hl.bind(mainMod .. " + ALT + left",  hl.dsp.window.swap({ direction = "l" }))
+hl.bind(mainMod .. " + ALT + right", hl.dsp.window.swap({ direction = "r" }))
+hl.bind(mainMod .. " + ALT + up",    hl.dsp.window.swap({ direction = "u" }))
+hl.bind(mainMod .. " + ALT + down",  hl.dsp.window.swap({ direction = "d" }))
+
+-- Move focus with mainMod + arrow keys
+hl.bind(mainMod .. " + left",  hl.dsp.focus({ direction = "l" }))
+hl.bind(mainMod .. " + right", hl.dsp.focus({ direction = "r" }))
+hl.bind(mainMod .. " + up",    hl.dsp.focus({ direction = "u" }))
+hl.bind(mainMod .. " + down",  hl.dsp.focus({ direction = "d" }))
+
+-- Workspaces related
+hl.bind(mainMod .. " + tab",         hl.dsp.focus({ workspace = "m+1" }))
+hl.bind(mainMod .. " + SHIFT + tab", hl.dsp.focus({ workspace = "m-1" }))
+
+-- Special workspace
+-- hl.bind(mainMod .. " + SHIFT + U", hl.dsp.window.move({ workspace = "special" }))
+-- hl.bind(mainMod .. " + U", hl.dsp.workspace.toggle_special())
+hl.bind(mainMod .. " + U",         hl.dsp.workspace.toggle_special("nyx"))
+hl.bind(mainMod .. " + SHIFT + U", hl.dsp.window.move({ workspace = "special:nyx" }))
+
+-- The following mappings use key codes to better support various keyboard layouts
+-- 1 is code:10, 2 is code:11, etc
+-- Switch workspaces with mainMod + [0-9]
+for i, code in ipairs({ 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 }) do
+    hl.bind(mainMod .. " + code:" .. code, hl.dsp.focus({ workspace = i })) -- code:10 = key 1 ... code:19 = key 0
+end
+
+-- Move active window and follow to workspace mainMod + SHIFT + [0-9]
+for i, code in ipairs({ 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 }) do
+    hl.bind(mainMod .. " + SHIFT + code:" .. code, hl.dsp.window.move({ workspace = i, follow = true }))
+end
+hl.bind(mainMod .. " + SHIFT + bracketleft",  hl.dsp.window.move({ workspace = -1, follow = true })) -- brackets [
+hl.bind(mainMod .. " + SHIFT + bracketright", hl.dsp.window.move({ workspace = 1,  follow = true })) -- brackets ]
+
+-- Move active window to a workspace silently mainMod + CTRL + [0-9]
+for i, code in ipairs({ 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 }) do
+    hl.bind(mainMod .. " + CTRL + code:" .. code, hl.dsp.window.move({ workspace = i, follow = false }))
+end
+hl.bind(mainMod .. " + CTRL + bracketleft",  hl.dsp.window.move({ workspace = -1, follow = false })) -- brackets [
+hl.bind(mainMod .. " + CTRL + bracketright", hl.dsp.window.move({ workspace = 1,  follow = false })) -- brackets ]
+
+-- Scroll through existing workspaces with mainMod + scroll
+hl.bind(mainMod .. " + mouse_down", hl.dsp.focus({ workspace = "e+1" }))
+hl.bind(mainMod .. " + mouse_up",   hl.dsp.focus({ workspace = "e-1" }))
+hl.bind(mainMod .. " + period",     hl.dsp.focus({ workspace = "e+1" }))
+hl.bind(mainMod .. " + comma",      hl.dsp.focus({ workspace = "e-1" }))
+
+-- Move/resize windows with mainMod + LMB/RMB and dragging
+hl.bind(mainMod .. " + mouse:272", hl.dsp.window.drag(),   { mouse = true }) -- mouse:272 = left click
+hl.bind(mainMod .. " + mouse:273", hl.dsp.window.resize(), { mouse = true }) -- mouse:273 = right click
+
+--------------------------------------------------------------------------------------
+-- Laptop specific keybinds
+--------------------------------------------------------------------------------------
+
+-- for disabling Touchpad. hyprctl devices to get device name.
+local touchpadDevice = "asue1209:00-04f3:319f-touchpad"
+
+hl.bind("XF86KbdBrightnessDown", hl.dsp.exec_cmd(scriptsDir .. "/BrightnessKbd.sh --dec"), { repeating = true }) -- decrease keyboard brightness
+hl.bind("XF86KbdBrightnessUp",   hl.dsp.exec_cmd(scriptsDir .. "/BrightnessKbd.sh --inc"), { repeating = true }) -- increase keyboard brightness
+hl.bind("XF86Launch1", hl.dsp.exec_cmd("rog-control-center")) -- ASUS Armory crate button
+hl.bind("XF86Launch3", hl.dsp.exec_cmd("asusctl led-mode -n")) -- FN+F4 Switch keyboard RGB profile
+hl.bind("XF86Launch4", hl.dsp.exec_cmd("asusctl profile -n")) -- FN+F5 change of fan profiles (Quiet, Balance, Performance)
+hl.bind("XF86MonBrightnessDown", hl.dsp.exec_cmd(scriptsDir .. "/Brightness.sh --dec"), { repeating = true }) -- decrease monitor brightness
+hl.bind("XF86MonBrightnessUp",   hl.dsp.exec_cmd(scriptsDir .. "/Brightness.sh --inc"), { repeating = true }) -- increase monitor brightness
+hl.bind("XF86TouchpadToggle", hl.dsp.exec_cmd(scriptsDir .. "/TouchPad.sh")) -- disable touchpad
+
+-- Screenshot keybindings using F6 (no PrintSrc button)
+-- hl.bind(mainMod .. " + F6", hl.dsp.exec_cmd(scriptsDir .. "/ScreenShot.sh --now")) -- screenshot
+-- hl.bind(mainMod .. " + SHIFT + F6", hl.dsp.exec_cmd(scriptsDir .. "/ScreenShot.sh --area")) -- screenshot (area)
+-- hl.bind(mainMod .. " + CTRL + F6", hl.dsp.exec_cmd(scriptsDir .. "/ScreenShot.sh --in5")) -- screenshot (5 secs delay)
+-- hl.bind(mainMod .. " + ALT + F6", hl.dsp.exec_cmd(scriptsDir .. "/ScreenShot.sh --in10")) -- screenshot (10 secs delay)
+-- hl.bind("ALT + F6", hl.dsp.exec_cmd(scriptsDir .. "/ScreenShot.sh --active")) -- screenshot (active window only)
+
+hl.device({
+    name    = touchpadDevice,
+    enabled = true,
+})

dotfiles/.config/hypr/layout/monitors.lua

@@ -0,0 +1,14 @@
+-- Generated with hyprdynamicmonitors freeze.
+-- This is a template that you can edit, it is just a starter that pulled your current monitor setup,
+-- adjust as needed.
+-- You can use templates here etc, see https://github.com/fiffeek/hyprdynamicmonitors/blob/main/examples/basic/hyprconfigs/template.go.tmpl.
+-- Monitors are given arbitrary tags (the "monitor" prefix and the ID coming from hyprland).
+-- If you are using the TUI to edit, leave this at the end of the file (the last monitor config applies)
+-- and leave the markers.
+-- Ported from UserConfigs/monitors.conf — hyprdynamicmonitors already supports writing this file
+-- directly as monitors.lua once hyprland.lua is active, so re-running it should stay compatible.
+-- <<<<< TUI AUTO START
+hl.monitor({ output = "desc:LG Electronics LG ULTRAWIDE 0x0002E68A", mode = "2560x1080@60.00000", position = "1920x-740", scale = 1.00000000, transform = 3, vrr = 0 })
+hl.monitor({ output = "desc:HP Inc. HP 524pf VNG447017D",           mode = "1920x1080@100.00000", position = "-1920x0",   scale = 1.00000000, transform = 0, vrr = 0 })
+hl.monitor({ output = "desc:Acer Technologies VG240Y S 0x126191DE", mode = "1920x1080@165.00301", position = "0x0",       scale = 1.00000000, transform = 0, vrr = 1, bitdepth = 10, cm = "wide" })
+-- <<<<< TUI AUTO END

dotfiles/.config/hypr/layout/windowrules.lua

@@ -0,0 +1,203 @@
+-- HyprFlux — https://github.com/ahmad9059/HyprFlux
+-- For window rules and layer rules
+-- Ported from UserConfigs/WindowRules.conf
+-- See https://wiki.hypr.land/Configuring/Basics/Window-Rules/
+
+-- windowrule - tags - add apps under appropriate tag to use the same settings
+-- browser tags
+hl.window_rule({ name = "windowrule-1", tag = "+browser", match = { class = "^([Ff]irefox|org.mozilla.firefox|[Ff]irefox-esr|[Ff]irefox-bin)$" } })
+hl.window_rule({ name = "rustdesk", tag = "+rustdesk", match = { class = "^(rustdesk)$", xwayland = true } })
+hl.window_rule({ name = "windowrule-2", tag = "+browser", match = { class = "^([Gg]oogle-chrome(-beta|-dev|-unstable)?)$" } })
+hl.window_rule({ name = "windowrule-3", tag = "+browser", match = { class = "^(chrome-.+-Default)$" } }) -- Chrome PWAs
+-- hl.window_rule({ name = "browser-chromium", tag = "+browser", match = { class = "^([Cc]hromium)$" } })
+hl.window_rule({ name = "windowrule-4", tag = "+browser", match = { class = "^([Mm]icrosoft-edge(-stable|-beta|-dev|-unstable))$" } })
+hl.window_rule({ name = "windowrule-5", tag = "+browser", match = { class = "^(Brave-browser(-beta|-dev|-unstable)?)$" } })
+hl.window_rule({ name = "windowrule-6", tag = "+browser", match = { class = "^([Tt]horium-browser|[Cc]achy-browser)$" } })
+hl.window_rule({ name = "windowrule-7", tag = "+browser", match = { class = "^(zen-alpha|zen)$" } })
+
+-- notif tags
+hl.window_rule({ name = "windowrule-8", tag = "+notif", match = { class = "^(swaync-control-center|swaync-notification-window|swaync-client|class)$" } })
+
+-- HyprFlux settings tag
+hl.window_rule({ name = "windowrule-9", tag = "+HyprFlux_Cheat", match = { title = "^(HyprFlux Quick Cheat Sheet)$" } })
+hl.window_rule({ name = "windowrule-10", tag = "+HyprFlux_Settings", match = { title = "^(HyprFlux Settings)$" } })
+hl.window_rule({ name = "windowrule-11", tag = "+HyprFlux-Settings", match = { class = "^(nwg-displays|nwg-look)$" } })
+
+-- terminal tags
+hl.window_rule({ name = "windowrule-12", tag = "+terminal", match = { class = "^(Alacritty|kitty|kitty-dropterm)$" } })
+
+-- email tags
+hl.window_rule({ name = "windowrule-13", tag = "+email", match = { class = "^([Tt]hunderbird|org.gnome.Evolution)$" } })
+hl.window_rule({ name = "windowrule-14", tag = "+email", match = { class = "^(eu.betterbird.Betterbird)$" } })
+
+-- project tags
+hl.window_rule({ name = "windowrule-15", tag = "+projects", match = { class = "^(codium|codium-url-handler|VSCodium)$" } })
+hl.window_rule({ name = "windowrule-16", tag = "+projects", match = { class = "^(VSCode|code-url-handler)$" } })
+hl.window_rule({ name = "windowrule-17", tag = "+projects", match = { class = "^(jetbrains-.+)$" } }) -- JetBrains IDEs
+
+-- screenshare tags
+hl.window_rule({ name = "windowrule-18", tag = "+screenshare", match = { class = "^(com.obsproject.Studio)$" } })
+
+-- IM tags
+-- hl.window_rule({ tag = "+im", match = { class = "^([Dd]iscord|[Ww]ebCord|[Vv]esktop)$" } })
+hl.window_rule({
+    name = "windowrule-19",
+    tag  = "+im",
+    center = true,
+    float  = true,
+    size   = "monitor_w*0.6 monitor_h*0.7",
+    match  = { class = "^([Ff]erdium)$" },
+})
+hl.window_rule({ name = "windowrule-20", tag = "+im", match = { class = "^([Ww]hatsapp-for-linux)$" } })
+hl.window_rule({ name = "windowrule-21", tag = "+im", match = { class = "^(ZapZap|com.rtosta.zapzap)$" } })
+hl.window_rule({ name = "windowrule-22", tag = "+im", match = { class = "^(org.telegram.desktop|io.github.tdesktop_x64.TDesktop)$" } })
+hl.window_rule({ name = "windowrule-23", tag = "+im", match = { class = "^(teams-for-linux)$" } })
+hl.window_rule({ name = "windowrule-24", tag = "+im", match = { class = "^(im.riot.Riot|Element)$" } }) -- Element Matrix client
+
+-- game tags
+hl.window_rule({ name = "windowrule-25", tag = "+games", match = { class = "^(gamescope)$" } })
+hl.window_rule({ name = "windowrule-26", tag = "+games", match = { class = "^(steam_app_\\d+)$" } })
+
+-- gamestore tags
+hl.window_rule({ name = "windowrule-27", tag = "+gamestore", match = { class = "^([Ss]team)$" } })
+hl.window_rule({ name = "windowrule-28", tag = "+gamestore", match = { title = "^([Ll]utris)$" } })
+hl.window_rule({ name = "windowrule-29", tag = "+gamestore", match = { class = "^(com.heroicgameslauncher.hgl)$" } })
+
+-- file-manager tags
+hl.window_rule({ name = "windowrule-30", tag = "+file-manager", match = { class = "^([Tt]hunar|org.gnome.Nautilus|[Pp]cmanfm-qt)$" } })
+hl.window_rule({ name = "windowrule-31", tag = "+file-manager", match = { class = "^(app.drey.Warp)$" } })
+
+-- wallpaper tags
+hl.window_rule({ name = "windowrule-32", tag = "+wallpaper", match = { class = "^([Ww]aytrogen)$" } })
+
+-- multimedia tags
+hl.window_rule({ name = "windowrule-33", tag = "+multimedia", match = { class = "^([Aa]udacious)$" } })
+
+-- multimedia-video tags
+hl.window_rule({ name = "windowrule-34", tag = "+multimedia_video", match = { class = "^([Mm]pv|vlc)$" } })
+
+-- settings tags
+hl.window_rule({ name = "windowrule-35", tag = "+settings", center = true, match = { title = "^(ROG Control)$" } })
+hl.window_rule({ name = "windowrule-36", tag = "+settings", match = { class = "^(wihotspot(-gui)?)$" } }) -- wifi hotspot
+hl.window_rule({ name = "windowrule-37", tag = "+settings", match = { class = "^([Bb]aobab|org.gnome.[Bb]aobab)$" } }) -- Disk usage analyzer
+hl.window_rule({ name = "windowrule-38", tag = "+settings", match = { class = "^(gnome-disks|wihotspot(-gui)?)$" } })
+hl.window_rule({ name = "windowrule-39", tag = "+settings", match = { title = "(Kvantum Manager)" } })
+hl.window_rule({ name = "windowrule-40", tag = "+settings", match = { class = "^(file-roller|org.gnome.FileRoller)$" } }) -- archive manager
+hl.window_rule({ name = "windowrule-41", tag = "+settings", match = { class = "^(nm-applet|nm-connection-editor|blueman-manager)$" } })
+hl.window_rule({ name = "windowrule-42", tag = "+settings", center = true, match = { class = "^(pavucontrol|org.pulseaudio.pavucontrol|com.saivert.pwvucontrol)$" } })
+hl.window_rule({ name = "windowrule-43", tag = "+settings", match = { class = "^(qt5ct|qt6ct|[Yy]ad)$" } })
+hl.window_rule({ name = "windowrule-44", tag = "+settings", match = { class = "(xdg-desktop-portal-gtk)" } })
+hl.window_rule({ name = "windowrule-45", tag = "+settings", match = { class = "^(org.kde.polkit-kde-authentication-agent-1)$" } })
+hl.window_rule({ name = "windowrule-46", tag = "+settings", match = { class = "^([Rr]ofi)$" } })
+
+-- Custom rule
+hl.window_rule({ name = "windowrule-47", tile = true, match = { class = "^([Cc]hromium)$" } })
+hl.window_rule({ name = "windowrule-48", size = "monitor_w*0.25 monitor_h*0.55", float = true, match = { class = "^(com.network.manager)$" } })
+hl.window_rule({ name = "windowrule-49", workspace = "special:nyx", match = { class = "^([Vv]esktop|[Dd]iscord|[Ss]potify)$" } })
+hl.window_rule({ name = "windowrule-255", size = "monitor_w*0.75 monitor_h*0.80", float = true, match = { class = "^([Bb]itwarden)$" } })
+
+-- viewer tags
+hl.window_rule({ name = "windowrule-50", tag = "+viewer", match = { class = "^(gnome-system-monitor|org.gnome.SystemMonitor|io.missioncenter.MissionCenter)$" } }) -- system monitor
+hl.window_rule({ name = "windowrule-51", tag = "+viewer", match = { class = "^(evince)$" } }) -- document viewer
+hl.window_rule({ name = "windowrule-52", tag = "+viewer", match = { class = "^(eog|org.gnome.Loupe)$" } }) -- image viewer
+
+-- Some special override rules
+hl.window_rule({ name = "windowrule-53", no_blur = true, opacity = "1.0", match = { tag = "multimedia_video*" } })
+
+-- POSITION
+-- hl.window_rule({ center = true, match = { float = true } }) -- warning, it cause even the menu to float and center.
+hl.window_rule({ name = "windowrule-54", center = true, float = true, size = "monitor_w*0.65 monitor_h*0.9", match = { tag = "HyprFlux_Cheat*" } })
+hl.window_rule({ name = "windowrule-55", center = true, float = true, match = { class = "([Tt]hunar)", title = "negative:(.*[Tt]hunar.*)" } })
+hl.window_rule({ name = "windowrule-56", center = true, float = true, match = { tag = "HyprFlux-Settings*" } })
+hl.window_rule({ name = "windowrule-57", center = true, match = { title = "^(Keybindings)$" } })
+hl.window_rule({ name = "windowrule-58", center = true, size = "monitor_w*0.6 monitor_h*0.7", match = { class = "^([Ww]hatsapp-for-linux|ZapZap|com.rtosta.zapzap)$" } })
+hl.window_rule({
+    name = "windowrule-59",
+    move = "monitor_w*0.61 monitor_h*0.07",
+    float = true,
+    size  = "monitor_w*0.38 monitor_h*0.38",
+    pin   = true,
+    keep_aspect_ratio = true,
+    match = { title = "^(Picture-in-Picture)$" },
+})
+
+-- hl.window_rule({ move = "72% 7%", match = { title = "^(Firefox)$" } })
+
+-- windowrule to avoid idle for fullscreen apps
+-- hl.window_rule({ idle_inhibit = "fullscreen", match = { class = "^(*)$" } })
+-- hl.window_rule({ idle_inhibit = "fullscreen", match = { title = "^(*)$" } })
+hl.window_rule({ name = "windowrule-60", idle_inhibit = "fullscreen", match = { fullscreen = true } })
+
+-- Discord to workspace 3
+-- NOTE: these two used the old single-line windowrule syntax in the source .conf (match packed
+-- oddly with the rule); windowrule-49 above already sends the same apps to special:nyx, so this
+-- looks like a pre-existing conflict in the original config rather than something introduced here —
+-- ported literally, last-defined-wins as before.
+hl.window_rule({ workspace = "3", match = { class = "^([Vv]esktop|[Dd]iscord|[Ss]potify|[Pp]lexamp)$" } })
+hl.window_rule({ size = "20% 20%", match = { class = "^([Pp]lexamp)" } })
+
+-- FLOAT
+hl.window_rule({ name = "windowrule-75", float = true, opacity = "0.9 0.7", size = "monitor_w*0.7 monitor_h*0.7", match = { tag = "wallpaper*" } })
+hl.window_rule({ name = "windowrule-76", float = true, opacity = "0.8 0.7", size = "monitor_w*0.7 monitor_h*0.7", match = { tag = "settings*" } })
+hl.window_rule({ name = "windowrule-77", float = true, match = { tag = "viewer*" } })
+hl.window_rule({ name = "windowrule-78", float = true, match = { class = "([Zz]oom|onedriver|onedriver-launcher)$" } })
+hl.window_rule({ name = "windowrule-79", float = true, match = { class = "(org.gnome.Calculator)", title = "(Calculator)" } })
+hl.window_rule({ name = "windowrule-80", float = true, match = { class = "^(mpv|com.github.rafostar.Clapper)$" } })
+hl.window_rule({ name = "windowrule-81", float = true, match = { class = "^([Qq]alculate-gtk)$" } })
+-- hl.window_rule({ float = true, match = { class = "^([Ww]hatsapp-for-linux|ZapZap|com.rtosta.zapzap)$" } })
+-- hl.window_rule({ float = true, match = { title = "^(Firefox)$" } })
+hl.window_rule({ name = "windowrule-82", float = true, match = { class = "^(fdm|freedownloadmanager)$" } })
+hl.window_rule({ name = "windowrule-83", float = true, match = { class = "^(proton-authenticator)$" } })
+hl.window_rule({ name = "windowrule-84", float = true, match = { class = "^([Ww]indscribe)$" } })
+
+-- windowrule - ######### float popups and dialogue #######
+hl.window_rule({ name = "windowrule-85", float = true, center = true, match = { title = "^(Authentication Required)$" } })
+hl.window_rule({ name = "windowrule-86", float = true, match = { class = "(codium|codium-url-handler|VSCodium)", title = "negative:(.*codium.*|.*VSCodium.*)" } })
+hl.window_rule({ name = "windowrule-87", float = true, match = { class = "^(com.heroicgameslauncher.hgl)$", title = "negative:(Heroic Games Launcher)" } })
+hl.window_rule({ name = "windowrule-88", float = true, match = { class = "^([Ss]team)$", title = "negative:^([Ss]team)$" } })
+hl.window_rule({ name = "windowrule-89", float = true, size = "monitor_w*0.7 monitor_h*0.6", center = true, match = { title = "^(Add Folder to Workspace)$" } })
+hl.window_rule({ name = "windowrule-90", float = true, size = "monitor_w*0.7 monitor_h*0.6", center = true, match = { title = "^(Save As)$" } })
+hl.window_rule({ name = "windowrule-91", float = true, size = "monitor_w*0.7 monitor_h*0.6", match = { initial_title = "(Open Files)" } })
+hl.window_rule({ name = "windowrule-92", float = true, center = true, size = "monitor_w*0.16 monitor_h*0.12", match = { title = "^(SDDM Background)$" } }) -- HyprFlux YAD for setting SDDM background
+-- END of float popups and dialogue #######
+
+-- OPACITY
+-- hl.window_rule({ opacity = "0.9 0.7", match = { tag = "browser*" } })
+-- hl.window_rule({ opacity = "0.9 0.8", match = { tag = "projects*" } })
+-- hl.window_rule({ opacity = "0.94 0.86", match = { tag = "im*" } })
+-- hl.window_rule({ opacity = "0.94 0.86", match = { tag = "multimedia*" } })
+-- hl.window_rule({ opacity = "0.9 0.8", match = { tag = "file-manager*" } })
+hl.window_rule({ name = "windowrule-93", opacity = "0.8 0.7", match = { tag = "terminal*" } })
+-- hl.window_rule({ opacity = "0.82 0.75", match = { tag = "viewer*" } })
+hl.window_rule({ name = "windowrule-94", opacity = "0.8 0.7", match = { class = "^(gedit|org.gnome.TextEditor|mousepad)$" } })
+hl.window_rule({ name = "windowrule-95", opacity = "0.9 0.8", match = { class = "^(deluge)$" } })
+hl.window_rule({ name = "windowrule-96", opacity = "0.9 0.8", match = { class = "^(seahorse)$" } }) -- gnome-keyring gui
+-- hl.window_rule({ opacity = "0.95 0.75", match = { title = "^(Picture-in-Picture)$" } })
+
+-- SIZE
+-- hl.window_rule({ size = "25% 25%", match = { title = "^(Firefox)$" } })
+
+-- PINNING
+-- hl.window_rule({ pin = true, match = { title = "^(Firefox)$" } })
+
+-- windowrule - extras
+
+-- BLUR & FULLSCREEN
+-- hl.window_rule({ active_border_color = "rgb(EE4B55)", inactive_border_color = "rgb(880808)", match = { fullscreen = true } })
+-- hl.window_rule({ active_border_color = "rgb(282737)", inactive_border_color = "rgb(1E1D2D)", match = { float = true } })
+-- hl.window_rule({ opacity = "0.8 0.8", match = { pin = true } })
+
+--------------------------------------------------------------------------------------
+-- LAYER RULES
+--------------------------------------------------------------------------------------
+
+hl.layer_rule({ name = "layerrule-1", blur = true, ignore_alpha = 0,   match = { namespace = "rofi" } })
+hl.layer_rule({ name = "layerrule-2", blur = true, ignore_alpha = 0,   match = { namespace = "notifications" } })
+hl.layer_rule({ name = "layerrule-3", blur = true, ignore_alpha = 0.5, match = { namespace = "quickshell:overview" } })
+
+-- hl.layer_rule({ ignore_alpha = 0.5, match = { tag = "notif*" } })
+-- hl.layer_rule({ no_anim = true (unset), match = { class = "^([Rr]ofi)$" } })
+-- hl.layer_rule({ blur = true, match = { class = "^([Rr]ofi)$" } })
+-- hl.layer_rule({ ignore_alpha = 0, match = { class = "<rofi>" } })
+-- hl.layer_rule({ ignore_alpha = 0, match = { namespace = "overview" } })
+-- hl.layer_rule({ blur = true, match = { namespace = "overview" } })

dotfiles/.config/hypr/layout/workspaces.lua

@@ -0,0 +1,29 @@
+-- HyprFlux — https://github.com/ahmad9059/HyprFlux
+-- NOTE: This will be overwritten by NWG-Displays
+-- once you use it and click apply.
+-- (nwg-displays already supports writing this file directly as workspaces.lua once
+-- hyprland.lua is active, so re-running it should stay compatible.)
+--
+-- Ported from UserConfigs/workspaces.conf
+-- You can set workspace rules to achieve workspace-specific behaviors.
+-- For instance, you can define a workspace where all windows are drawn without borders or gaps.
+-- https://wiki.hypr.land/Configuring/Basics/Workspace-Rules/
+
+-- Assigning workspace to a certain monitor. Below are just examples
+hl.workspace_rule({ workspace = 1, monitor = "DP-2",     default = true })
+hl.workspace_rule({ workspace = 2, monitor = "DP-1",     default = true })
+hl.workspace_rule({ workspace = 3, monitor = "HDMI-A-1", default = true })
+-- hl.workspace_rule({ workspace = 4, monitor = "eDP-1" })
+-- hl.workspace_rule({ workspace = 5, monitor = "DP-2" })
+-- hl.workspace_rule({ workspace = 6, monitor = "DP-2" })
+-- hl.workspace_rule({ workspace = 7, monitor = "DP-2" })
+-- hl.workspace_rule({ workspace = 8, monitor = "DP-2" })
+
+-- example rules (from wiki)
+-- hl.workspace_rule({ workspace = 3, rounding = false, decorate = false })
+-- hl.workspace_rule({ workspace = "name:coding", rounding = false, decorate = false, gaps_in = 0, gaps_out = 0, border = false, monitor = "DP-1" })
+-- hl.workspace_rule({ workspace = 8, border_size = 8 })
+-- hl.workspace_rule({ workspace = "name:Hello", monitor = "DP-1", default = true })
+-- hl.workspace_rule({ workspace = "name:gaming", monitor = "desc:Chimei Innolux Corporation 0x150C", default = true })
+-- hl.workspace_rule({ workspace = 5, on_created_empty = "[float] firefox" })
+-- hl.workspace_rule({ workspace = "special:scratchpad", on_created_empty = "foot" })

dotfiles/.config/hypr/presets/anim-00-default.lua

@@ -0,0 +1,22 @@
+-- HyprFlux — https://github.com/ahmad9059/HyprFlux
+-- Ported from animations/00-default.conf (unused preset — not required by anything)
+
+hl.config({ animations = { enabled = true } })
+
+hl.curve("wind",   { type = "bezier", points = { { 0.05, 0.9 }, { 0.1, 1.05 } } })
+hl.curve("winIn",  { type = "bezier", points = { { 0.1, 1.1 },  { 0.1, 1.1 } } })
+hl.curve("winOut", { type = "bezier", points = { { 0.3, -0.3 }, { 0, 1 } } })
+hl.curve("liner",  { type = "bezier", points = { { 1, 1 },      { 1, 1 } } })
+
+hl.animation({ leaf = "windows",     enabled = true, speed = 6, bezier = "wind",   style = "slide" })
+hl.animation({ leaf = "windowsIn",   enabled = true, speed = 5, bezier = "winIn",  style = "slide" })
+hl.animation({ leaf = "windowsOut",  enabled = true, speed = 3, bezier = "smoothOut", style = "slide" })
+hl.animation({ leaf = "windowsMove", enabled = true, speed = 5, bezier = "wind",   style = "slide" })
+hl.animation({ leaf = "border",      enabled = true, speed = 1,   bezier = "liner" })
+hl.animation({ leaf = "borderangle", enabled = true, speed = 100, bezier = "liner", style = "loop" }) -- used by rainbow borders and rotating colors; speed clamped from 180 -> Lua hl.animation caps speed at 100
+hl.animation({ leaf = "fade",        enabled = true, speed = 3, bezier = "smoothOut" })
+hl.animation({ leaf = "workspaces",  enabled = true, speed = 5, bezier = "overshot" })
+
+-- animations for -git or version >0.42.0
+hl.animation({ leaf = "workspacesIn",  enabled = true, speed = 5, bezier = "winIn",  style = "slide" })
+hl.animation({ leaf = "workspacesOut", enabled = true, speed = 5, bezier = "winOut", style = "slide" })

dotfiles/.config/hypr/presets/anim-01-default-v2.lua

@@ -0,0 +1,25 @@
+-- HyprFlux — https://github.com/ahmad9059/HyprFlux
+-- old animations
+-- Ported from animations/01-default - v2.conf (unused preset — not required by anything)
+
+hl.config({ animations = { enabled = true } })
+
+hl.curve("myBezier", { type = "bezier", points = { { 0.05, 0.9 }, { 0.1, 1.05 } } })
+hl.curve("linear",   { type = "bezier", points = { { 0.0, 0.0 },  { 1.0, 1.0 } } })
+hl.curve("wind",     { type = "bezier", points = { { 0.05, 0.9 }, { 0.1, 1.05 } } })
+hl.curve("winIn",    { type = "bezier", points = { { 0.1, 1.1 },  { 0.1, 1.1 } } })
+hl.curve("winOut",   { type = "bezier", points = { { 0.3, -0.3 }, { 0, 1 } } })
+hl.curve("slow",     { type = "bezier", points = { { 0, 0.85 },   { 0.3, 1 } } })
+hl.curve("overshot", { type = "bezier", points = { { 0.7, 0.6 },  { 0.1, 1.1 } } })
+hl.curve("bounce",   { type = "bezier", points = { { 1.1, 1.6 },  { 0.1, 0.85 } } })
+hl.curve("sligshot", { type = "bezier", points = { { 1, -1 },     { 0.15, 1.25 } } })
+hl.curve("nice",     { type = "bezier", points = { { 0, 6.9 },    { 0.5, -4.20 } } })
+
+hl.animation({ leaf = "windowsIn",   enabled = true, speed = 5,  bezier = "slow",   style = "popin" })
+hl.animation({ leaf = "windowsOut",  enabled = true, speed = 5,  bezier = "winOut", style = "popin" })
+hl.animation({ leaf = "windowsMove", enabled = true, speed = 5,  bezier = "wind",   style = "slide" })
+hl.animation({ leaf = "border",      enabled = true, speed = 10, bezier = "linear" })
+hl.animation({ leaf = "borderangle", enabled = true, speed = 100, bezier = "linear", style = "loop" }) -- used by rainbow borders and rotating colors; speed clamped from 180 -> Lua hl.animation caps speed at 100
+hl.animation({ leaf = "fade",        enabled = true, speed = 5,  bezier = "overshot" })
+hl.animation({ leaf = "workspaces",  enabled = true, speed = 5,  bezier = "wind" })
+hl.animation({ leaf = "windows",     enabled = true, speed = 5,  bezier = "bounce", style = "popin" })

dotfiles/.config/hypr/presets/anim-03-disable.lua

@@ -0,0 +1,4 @@
+-- HyprFlux — https://github.com/ahmad9059/HyprFlux
+-- Ported from animations/03- Disable Animation.conf (unused preset — not required by anything)
+
+hl.config({ animations = { enabled = false } })

dotfiles/.config/hypr/presets/anim-end-4.lua

@@ -0,0 +1,39 @@
+-- HyprFlux — https://github.com/ahmad9059/HyprFlux
+-- name "End-4"
+-- credit https://github.com/end-4/dots-hyprland
+-- Ported from animations/END-4.conf (unused preset — not required by anything)
+
+hl.config({ animations = { enabled = true } })
+
+-- Animation curves
+hl.curve("linear",         { type = "bezier", points = { { 0, 0 },       { 1, 1 } } })
+hl.curve("md3_standard",   { type = "bezier", points = { { 0.2, 0 },     { 0, 1 } } })
+hl.curve("md3_decel",      { type = "bezier", points = { { 0.05, 0.7 },  { 0.1, 1 } } })
+hl.curve("md3_accel",      { type = "bezier", points = { { 0.3, 0 },     { 0.8, 0.15 } } })
+hl.curve("overshot",       { type = "bezier", points = { { 0.05, 0.9 },  { 0.1, 1.1 } } })
+hl.curve("crazyshot",      { type = "bezier", points = { { 0.1, 1.5 },   { 0.76, 0.92 } } })
+hl.curve("hyprnostretch",  { type = "bezier", points = { { 0.05, 0.9 },  { 0.1, 1.0 } } })
+hl.curve("menu_decel",     { type = "bezier", points = { { 0.1, 1 },     { 0, 1 } } })
+hl.curve("menu_accel",     { type = "bezier", points = { { 0.38, 0.04 }, { 1, 0.07 } } })
+hl.curve("easeInOutCirc",  { type = "bezier", points = { { 0.85, 0 },    { 0.15, 1 } } })
+hl.curve("easeOutCirc",    { type = "bezier", points = { { 0, 0.55 },    { 0.45, 1 } } })
+hl.curve("easeOutExpo",    { type = "bezier", points = { { 0.16, 1 },    { 0.3, 1 } } })
+hl.curve("softAcDecel",    { type = "bezier", points = { { 0.26, 0.26 }, { 0.15, 1 } } })
+hl.curve("md2",            { type = "bezier", points = { { 0.4, 0 },     { 0.2, 1 } } }) -- use with .2s duration
+
+-- Animation configs
+hl.animation({ leaf = "windows",    enabled = true, speed = 3, bezier = "md3_decel", style = "popin 60%" })
+hl.animation({ leaf = "windowsIn",  enabled = true, speed = 3, bezier = "md3_decel", style = "popin 60%" })
+hl.animation({ leaf = "windowsOut", enabled = true, speed = 3, bezier = "md3_accel", style = "popin 60%" })
+hl.animation({ leaf = "border",     enabled = true, speed = 10, bezier = "default" })
+hl.animation({ leaf = "fade",       enabled = true, speed = 3, bezier = "md3_decel" })
+-- hl.animation({ leaf = "layers", enabled = true, speed = 2, bezier = "md3_decel", style = "slide" })
+hl.animation({ leaf = "layersIn",       enabled = true, speed = 3,   bezier = "menu_decel", style = "slide" })
+hl.animation({ leaf = "layersOut",      enabled = true, speed = 1.6, bezier = "menu_accel" })
+hl.animation({ leaf = "fadeLayersIn",   enabled = true, speed = 2,   bezier = "menu_decel" })
+hl.animation({ leaf = "fadeLayersOut",  enabled = true, speed = 4.5, bezier = "menu_accel" })
+hl.animation({ leaf = "workspaces", enabled = true, speed = 7, bezier = "menu_decel", style = "slide" })
+-- hl.animation({ leaf = "workspaces", enabled = true, speed = 2.5, bezier = "softAcDecel", style = "slide" })
+-- hl.animation({ leaf = "workspaces", enabled = true, speed = 7, bezier = "menu_decel", style = "slidefade 15%" })
+-- hl.animation({ leaf = "specialWorkspace", enabled = true, speed = 3, bezier = "md3_decel", style = "slidefadevert 15%" })
+hl.animation({ leaf = "specialWorkspace", enabled = true, speed = 3, bezier = "md3_decel", style = "slidevert" })

dotfiles/.config/hypr/presets/anim-hyde-default.lua

@@ -0,0 +1,21 @@
+-- HyprFlux — https://github.com/ahmad9059/HyprFlux
+-- name "Default"
+-- credit https://github.com/prasanthrangan/hyprdots
+-- Ported from animations/HYDE - default.conf (unused preset — not required by anything)
+
+hl.config({ animations = { enabled = true } })
+
+hl.curve("wind",   { type = "bezier", points = { { 0.05, 0.9 }, { 0.1, 1.05 } } })
+hl.curve("winIn",  { type = "bezier", points = { { 0.1, 1.1 },  { 0.1, 1.1 } } })
+hl.curve("winOut", { type = "bezier", points = { { 0.3, -0.3 }, { 0, 1 } } })
+hl.curve("liner",  { type = "bezier", points = { { 1, 1 },      { 1, 1 } } })
+
+hl.animation({ leaf = "windows",         enabled = true, speed = 6, bezier = "wind",   style = "slide" })
+hl.animation({ leaf = "windowsIn",       enabled = true, speed = 6, bezier = "winIn",  style = "slide" })
+hl.animation({ leaf = "windowsOut",      enabled = true, speed = 5, bezier = "winOut", style = "slide" })
+hl.animation({ leaf = "windowsMove",     enabled = true, speed = 5, bezier = "wind",   style = "slide" })
+hl.animation({ leaf = "border",          enabled = true, speed = 1,  bezier = "liner" })
+hl.animation({ leaf = "borderangle",     enabled = true, speed = 30, bezier = "liner", style = "once" })
+hl.animation({ leaf = "fade",            enabled = true, speed = 10, bezier = "default" })
+hl.animation({ leaf = "workspaces",      enabled = true, speed = 5,  bezier = "wind" })
+hl.animation({ leaf = "specialWorkspace", enabled = true, speed = 5, bezier = "wind", style = "slidevert" })

dotfiles/.config/hypr/presets/anim-hyde-minimal-1.lua

@@ -0,0 +1,20 @@
+-- HyprFlux — https://github.com/ahmad9059/HyprFlux
+-- name "Minimal-1"
+-- credit https://github.com/prasanthrangan/hyprdots
+-- Ported from animations/HYDE - minimal-1.conf (unused preset — not required by anything)
+
+hl.config({ animations = { enabled = true } })
+
+hl.curve("wind",   { type = "bezier", points = { { 0.05, 0.9 }, { 0.1, 1.05 } } })
+hl.curve("winIn",  { type = "bezier", points = { { 0.1, 1.1 },  { 0.1, 1.1 } } })
+hl.curve("winOut", { type = "bezier", points = { { 0.3, -0.3 }, { 0, 1 } } })
+hl.curve("liner",  { type = "bezier", points = { { 1, 1 },      { 1, 1 } } })
+
+hl.animation({ leaf = "windows",     enabled = true, speed = 6, bezier = "wind",   style = "slide" })
+hl.animation({ leaf = "windowsIn",   enabled = true, speed = 6, bezier = "winIn",  style = "slide" })
+hl.animation({ leaf = "windowsOut",  enabled = true, speed = 5, bezier = "winOut", style = "slide" })
+hl.animation({ leaf = "windowsMove", enabled = true, speed = 5, bezier = "wind",   style = "slide" })
+hl.animation({ leaf = "border",      enabled = true, speed = 1,  bezier = "liner" })
+hl.animation({ leaf = "borderangle", enabled = true, speed = 30, bezier = "liner", style = "once" })
+hl.animation({ leaf = "fade",        enabled = true, speed = 10, bezier = "default" })
+hl.animation({ leaf = "workspaces",  enabled = true, speed = 5,  bezier = "wind" })

dotfiles/.config/hypr/presets/anim-hyde-minimal-2.lua

@@ -0,0 +1,14 @@
+-- HyprFlux — https://github.com/ahmad9059/HyprFlux
+-- name "Minimal-2"
+-- credit https://github.com/prasanthrangan/hyprdots
+-- Ported from animations/HYDE - minimal-2.conf (unused preset — not required by anything)
+
+hl.config({ animations = { enabled = true } })
+
+hl.curve("quart", { type = "bezier", points = { { 0.25, 1 }, { 0.5, 1 } } })
+
+hl.animation({ leaf = "windows",     enabled = true, speed = 6, bezier = "quart", style = "slide" })
+hl.animation({ leaf = "border",      enabled = true, speed = 6, bezier = "quart" })
+hl.animation({ leaf = "borderangle", enabled = true, speed = 6, bezier = "quart" })
+hl.animation({ leaf = "fade",        enabled = true, speed = 6, bezier = "quart" })
+hl.animation({ leaf = "workspaces",  enabled = true, speed = 6, bezier = "quart" })

dotfiles/.config/hypr/presets/anim-hyde-optimized.lua

@@ -0,0 +1,40 @@
+-- HyprFlux — https://github.com/ahmad9059/HyprFlux
+-- name "Optimized"
+-- credit https://github.com/prasanthrangan/hyprdots
+-- Ported from animations/HYDE - optimized.conf (unused preset — not required by anything)
+
+hl.config({ animations = { enabled = true } })
+
+hl.curve("wind",           { type = "bezier", points = { { 0.05, 0.85 }, { 0.03, 0.97 } } })
+hl.curve("winIn",          { type = "bezier", points = { { 0.07, 0.88 }, { 0.04, 0.99 } } })
+hl.curve("winOut",         { type = "bezier", points = { { 0.20, -0.15 }, { 0, 1 } } })
+hl.curve("liner",          { type = "bezier", points = { { 1, 1 },       { 1, 1 } } })
+hl.curve("md3_standard",   { type = "bezier", points = { { 0.12, 0 },    { 0, 1 } } })
+hl.curve("md3_decel",      { type = "bezier", points = { { 0.05, 0.80 }, { 0.10, 0.97 } } })
+hl.curve("md3_accel",      { type = "bezier", points = { { 0.20, 0 },    { 0.80, 0.08 } } })
+hl.curve("overshot",       { type = "bezier", points = { { 0.05, 0.85 }, { 0.07, 1.04 } } })
+hl.curve("crazyshot",      { type = "bezier", points = { { 0.1, 1.22 },  { 0.68, 0.98 } } })
+hl.curve("hyprnostretch",  { type = "bezier", points = { { 0.05, 0.82 }, { 0.03, 0.94 } } })
+hl.curve("menu_decel",     { type = "bezier", points = { { 0.05, 0.82 }, { 0, 1 } } })
+hl.curve("menu_accel",     { type = "bezier", points = { { 0.20, 0 },    { 0.82, 0.10 } } })
+hl.curve("easeInOutCirc",  { type = "bezier", points = { { 0.75, 0 },    { 0.15, 1 } } })
+hl.curve("easeOutCirc",    { type = "bezier", points = { { 0, 0.48 },    { 0.38, 1 } } })
+hl.curve("easeOutExpo",    { type = "bezier", points = { { 0.10, 0.94 }, { 0.23, 0.98 } } })
+hl.curve("softAcDecel",    { type = "bezier", points = { { 0.20, 0.20 }, { 0.15, 1 } } })
+hl.curve("md2",            { type = "bezier", points = { { 0.30, 0 },    { 0.15, 1 } } })
+
+hl.curve("OutBack",        { type = "bezier", points = { { 0.28, 1.40 }, { 0.58, 1 } } })
+hl.curve("easeInOutCirc",  { type = "bezier", points = { { 0.78, 0 },    { 0.15, 1 } } })
+
+hl.animation({ leaf = "border",      enabled = true, speed = 1.6, bezier = "liner" })
+hl.animation({ leaf = "borderangle", enabled = true, speed = 82,  bezier = "liner", style = "once" })
+hl.animation({ leaf = "windowsIn",   enabled = true, speed = 3.2, bezier = "winIn", style = "slide" })
+hl.animation({ leaf = "windowsOut",  enabled = true, speed = 2.8, bezier = "easeOutCirc" })
+hl.animation({ leaf = "windowsMove", enabled = true, speed = 3.0, bezier = "wind",   style = "slide" })
+hl.animation({ leaf = "fade",        enabled = true, speed = 1.8, bezier = "md3_decel" })
+hl.animation({ leaf = "layersIn",       enabled = true, speed = 1.8, bezier = "menu_decel", style = "slide" })
+hl.animation({ leaf = "layersOut",      enabled = true, speed = 1.5, bezier = "menu_accel" })
+hl.animation({ leaf = "fadeLayersIn",   enabled = true, speed = 1.6, bezier = "menu_decel" })
+hl.animation({ leaf = "fadeLayersOut",  enabled = true, speed = 1.8, bezier = "menu_accel" })
+hl.animation({ leaf = "workspaces",  enabled = true, speed = 4.0, bezier = "menu_decel", style = "slide" })
+hl.animation({ leaf = "specialWorkspace", enabled = true, speed = 2.3, bezier = "md3_decel", style = "slidefadevert 15%" })

dotfiles/.config/hypr/presets/anim-hyde-vertical.lua

@@ -0,0 +1,32 @@
+-- HyprFlux — https://github.com/ahmad9059/HyprFlux
+-- name "Vertical"
+-- credit https://github.com/prasanthrangan/hyprdots
+-- Ported from animations/HYDE - Vertical.conf (unused preset — not required by anything)
+
+hl.config({ animations = { enabled = true } })
+
+hl.curve("fluent_decel",  { type = "bezier", points = { { 0, 0.2 },   { 0.4, 1 } } })
+hl.curve("easeOutCirc",   { type = "bezier", points = { { 0, 0.55 },  { 0.45, 1 } } })
+hl.curve("easeOutCubic",  { type = "bezier", points = { { 0.33, 1 },  { 0.68, 1 } } })
+hl.curve("easeinoutsine", { type = "bezier", points = { { 0.37, 0 },  { 0.63, 1 } } })
+
+-- Windows
+hl.animation({ leaf = "windowsIn",   enabled = true, speed = 1.5, bezier = "easeinoutsine", style = "popin 60%" }) -- window open
+hl.animation({ leaf = "windowsOut",  enabled = true, speed = 1.5, bezier = "easeOutCubic",  style = "popin 60%" }) -- window close.
+hl.animation({ leaf = "windowsMove", enabled = true, speed = 1.5, bezier = "easeinoutsine", style = "slide" }) -- everything in between, moving, dragging, resizing.
+
+-- Fading
+hl.animation({ leaf = "fade", enabled = true, speed = 2.5, bezier = "fluent_decel" })
+
+hl.animation({ leaf = "fadeLayersIn", enabled = false })
+hl.animation({ leaf = "border",       enabled = false })
+
+-- Layers
+hl.animation({ leaf = "layers", enabled = true, speed = 1.5, bezier = "easeinoutsine", style = "popin" })
+
+-- Workspaces
+-- styles: slide, slidevert, fade, slidefade, slidefadevert
+-- hl.animation({ leaf = "workspaces", enabled = true, speed = 3, bezier = "fluent_decel", style = "slidefade 30%" })
+hl.animation({ leaf = "workspaces", enabled = true, speed = 3, bezier = "fluent_decel", style = "slidefadevert 30%" })
+
+hl.animation({ leaf = "specialWorkspace", enabled = true, speed = 2, bezier = "fluent_decel", style = "slidefade 10%" })

dotfiles/.config/hypr/presets/anim-mahaveer-1.lua

@@ -0,0 +1,52 @@
+-- HyprFlux — https://github.com/ahmad9059/HyprFlux
+-- name "Me-1"
+-- credit https://github.com/mahaveergurjar
+-- Ported from animations/Mahaveer - me-1.conf (unused preset — not required by anything)
+
+hl.config({ animations = { enabled = true } })
+
+-- Animation curves
+hl.curve("wind",           { type = "bezier", points = { { 0.05, 0.9 },  { 0.1, 1.05 } } })
+hl.curve("winIn",          { type = "bezier", points = { { 0.1, 1.1 },   { 0.1, 1.1 } } })
+hl.curve("winOut",         { type = "bezier", points = { { 0.3, -0.3 },  { 0, 1 } } })
+hl.curve("liner",          { type = "bezier", points = { { 1, 1 },       { 1, 1 } } })
+-- hl.curve("linear", { type = "bezier", points = { {0,0}, {1,1} } })
+hl.curve("md3_standard",   { type = "bezier", points = { { 0.2, 0 },     { 0, 1 } } })
+hl.curve("md3_decel",      { type = "bezier", points = { { 0.05, 0.7 },  { 0.1, 1 } } })
+hl.curve("md3_accel",      { type = "bezier", points = { { 0.3, 0 },     { 0.8, 0.15 } } })
+hl.curve("overshot",       { type = "bezier", points = { { 0.05, 0.9 },  { 0.1, 1.1 } } })
+hl.curve("crazyshot",      { type = "bezier", points = { { 0.1, 1.5 },   { 0.76, 0.92 } } })
+hl.curve("hyprnostretch",  { type = "bezier", points = { { 0.05, 0.9 },  { 0.1, 1.0 } } })
+hl.curve("menu_decel",     { type = "bezier", points = { { 0.1, 1 },     { 0, 1 } } })
+hl.curve("menu_accel",     { type = "bezier", points = { { 0.38, 0.04 }, { 1, 0.07 } } })
+hl.curve("easeInOutCirc",  { type = "bezier", points = { { 0.85, 0 },    { 0.15, 1 } } })
+hl.curve("easeOutCirc",    { type = "bezier", points = { { 0, 0.55 },    { 0.45, 1 } } })
+hl.curve("easeOutExpo",    { type = "bezier", points = { { 0.16, 1 },    { 0.3, 1 } } })
+hl.curve("softAcDecel",    { type = "bezier", points = { { 0.26, 0.26 }, { 0.15, 1 } } })
+hl.curve("md2",            { type = "bezier", points = { { 0.4, 0 },     { 0.2, 1 } } }) -- use with .2s duration
+
+-- Animation configs
+-- hl.animation({ leaf = "windows", enabled = true, speed = 3, bezier = "md3_decel", style = "popin 60%" })
+-- hl.animation({ leaf = "windowsIn", enabled = true, speed = 3, bezier = "md3_decel", style = "popin 60%" })
+-- hl.animation({ leaf = "windowsOut", enabled = true, speed = 3, bezier = "md3_accel", style = "popin 60%" })
+-- hl.animation({ leaf = "windows", enabled = true, speed = 6, bezier = "wind", style = "slide" })
+hl.animation({ leaf = "border",      enabled = true, speed = 1,  bezier = "liner" })
+hl.animation({ leaf = "borderangle", enabled = true, speed = 30, bezier = "liner", style = "once" })
+hl.animation({ leaf = "windows",     enabled = true, speed = 6, bezier = "wind",   style = "slide" })
+hl.animation({ leaf = "windowsIn",   enabled = true, speed = 6, bezier = "winIn",  style = "slide" })
+hl.animation({ leaf = "windowsOut",  enabled = true, speed = 5, bezier = "winOut", style = "slide" })
+hl.animation({ leaf = "windowsMove", enabled = true, speed = 5, bezier = "wind",   style = "slide" })
+
+-- hl.animation({ leaf = "border", enabled = true, speed = 10, bezier = "default" })
+hl.animation({ leaf = "fade", enabled = true, speed = 3, bezier = "md3_decel" })
+-- hl.animation({ leaf = "layers", enabled = true, speed = 2, bezier = "md3_decel", style = "slide" })
+hl.animation({ leaf = "layersIn",      enabled = true, speed = 3,   bezier = "menu_decel", style = "slide" })
+hl.animation({ leaf = "layersOut",     enabled = true, speed = 1.6, bezier = "menu_accel" })
+hl.animation({ leaf = "fadeLayersIn",  enabled = true, speed = 2,   bezier = "menu_decel" })
+hl.animation({ leaf = "fadeLayersOut", enabled = true, speed = 4.5, bezier = "menu_accel" })
+hl.animation({ leaf = "workspaces", enabled = true, speed = 7, bezier = "menu_decel", style = "slide" })
+hl.animation({ leaf = "workspaces", enabled = true, speed = 5, bezier = "wind" })
+-- hl.animation({ leaf = "workspaces", enabled = true, speed = 2.5, bezier = "softAcDecel", style = "slide" })
+-- hl.animation({ leaf = "workspaces", enabled = true, speed = 7, bezier = "menu_decel", style = "slidefade 15%" })
+hl.animation({ leaf = "specialWorkspace", enabled = true, speed = 3, bezier = "md3_decel", style = "slidefadevert 15%" })
+hl.animation({ leaf = "specialWorkspace", enabled = true, speed = 3, bezier = "md3_decel", style = "slidevert" })

dotfiles/.config/hypr/presets/anim-mahaveer-2.lua

@@ -0,0 +1,27 @@
+-- HyprFlux — https://github.com/ahmad9059/HyprFlux
+-- name "Me-2"
+-- credit https://github.com/mahaveergurjar
+-- Ported from animations/Mahaveer - me-2.conf (unused preset — not required by anything)
+
+hl.config({ animations = { enabled = true } })
+
+hl.curve("wind",      { type = "bezier", points = { { 0.05, 0.9 },  { 0.1, 1.05 } } })
+hl.curve("winIn",     { type = "bezier", points = { { 0.1, 1.1 },   { 0.1, 1.1 } } })
+hl.curve("winOut",    { type = "bezier", points = { { 0.3, -0.3 },  { 0, 1 } } })
+hl.curve("liner",     { type = "bezier", points = { { 1, 1 },       { 1, 1 } } })
+hl.curve("overshot",  { type = "bezier", points = { { 0.05, 0.9 },  { 0.1, 1.05 } } })
+hl.curve("smoothOut", { type = "bezier", points = { { 0.5, 0 },     { 0.99, 0.99 } } })
+hl.curve("smoothIn",  { type = "bezier", points = { { 0.5, -0.5 },  { 0.68, 1.5 } } })
+
+hl.animation({ leaf = "windows",     enabled = true, speed = 6, bezier = "wind",      style = "slide" })
+hl.animation({ leaf = "windowsIn",   enabled = true, speed = 5, bezier = "winIn",     style = "slide" })
+hl.animation({ leaf = "windowsOut",  enabled = true, speed = 3, bezier = "smoothOut", style = "slide" })
+hl.animation({ leaf = "windowsMove", enabled = true, speed = 5, bezier = "wind",      style = "slide" })
+hl.animation({ leaf = "border",      enabled = true, speed = 1,   bezier = "liner" })
+hl.animation({ leaf = "borderangle", enabled = true, speed = 100, bezier = "liner", style = "loop" }) -- used by rainbow borders and rotating colors; speed clamped from 180 -> Lua hl.animation caps speed at 100
+hl.animation({ leaf = "fade",        enabled = true, speed = 3, bezier = "smoothOut" })
+hl.animation({ leaf = "workspaces",  enabled = true, speed = 5, bezier = "overshot" })
+
+-- animations for -git or version >0.42.0
+hl.animation({ leaf = "workspacesIn",  enabled = true, speed = 5, bezier = "winIn",  style = "slide" })
+hl.animation({ leaf = "workspacesOut", enabled = true, speed = 5, bezier = "winOut", style = "slide" })

dotfiles/.config/hypr/presets/anim-ml4w-classic.lua

@@ -0,0 +1,15 @@
+-- HyprFlux — https://github.com/ahmad9059/HyprFlux
+-- name "Classic"
+-- credit https://github.com/mylinuxforwork/dotfiles
+-- Ported from animations/ML4W - classic.conf (unused preset — not required by anything)
+
+hl.config({ animations = { enabled = true } })
+
+hl.curve("myBezier", { type = "bezier", points = { { 0.05, 0.9 }, { 0.1, 1.05 } } })
+
+hl.animation({ leaf = "windows",     enabled = true, speed = 7, bezier = "myBezier" })
+hl.animation({ leaf = "windowsOut",  enabled = true, speed = 7, bezier = "default", style = "popin 80%" })
+hl.animation({ leaf = "border",      enabled = true, speed = 10, bezier = "default" })
+hl.animation({ leaf = "borderangle", enabled = true, speed = 8,  bezier = "default" })
+hl.animation({ leaf = "fade",        enabled = true, speed = 7, bezier = "default" })
+hl.animation({ leaf = "workspaces",  enabled = true, speed = 6, bezier = "default" })

dotfiles/.config/hypr/presets/anim-ml4w-dynamic.lua

@@ -0,0 +1,20 @@
+-- HyprFlux — https://github.com/ahmad9059/HyprFlux
+-- name "Dynamic"
+-- credit https://github.com/mylinuxforwork/dotfiles
+-- Ported from animations/ML4W - dynamic.conf (unused preset — not required by anything)
+
+hl.config({ animations = { enabled = true } })
+
+hl.curve("wind",   { type = "bezier", points = { { 0.05, 0.9 }, { 0.1, 1.05 } } })
+hl.curve("winIn",  { type = "bezier", points = { { 0.1, 1.1 },  { 0.1, 1.1 } } })
+hl.curve("winOut", { type = "bezier", points = { { 0.3, -0.3 }, { 0, 1 } } })
+hl.curve("liner",  { type = "bezier", points = { { 1, 1 },      { 1, 1 } } })
+
+hl.animation({ leaf = "windows",     enabled = true, speed = 6, bezier = "wind",   style = "slide" })
+hl.animation({ leaf = "windowsIn",   enabled = true, speed = 6, bezier = "winIn",  style = "slide" })
+hl.animation({ leaf = "windowsOut",  enabled = true, speed = 5, bezier = "winOut", style = "slide" })
+hl.animation({ leaf = "windowsMove", enabled = true, speed = 5, bezier = "wind",   style = "slide" })
+hl.animation({ leaf = "border",      enabled = true, speed = 1,  bezier = "liner" })
+hl.animation({ leaf = "borderangle", enabled = true, speed = 30, bezier = "liner", style = "loop" })
+hl.animation({ leaf = "fade",        enabled = true, speed = 10, bezier = "default" })
+hl.animation({ leaf = "workspaces",  enabled = true, speed = 5,  bezier = "wind" })

dotfiles/.config/hypr/presets/anim-ml4w-fast.lua

@@ -0,0 +1,24 @@
+-- HyprFlux — https://github.com/ahmad9059/HyprFlux
+-- name "Fast"
+-- credit https://github.com/mylinuxforwork/dotfiles
+-- Ported from animations/ML4W - fast.conf (unused preset — not required by anything)
+
+hl.config({ animations = { enabled = true } })
+
+hl.curve("linear",        { type = "bezier", points = { { 0, 0 },       { 1, 1 } } })
+hl.curve("md3_standard",  { type = "bezier", points = { { 0.2, 0 },     { 0, 1 } } })
+hl.curve("md3_decel",     { type = "bezier", points = { { 0.05, 0.7 },  { 0.1, 1 } } })
+hl.curve("md3_accel",     { type = "bezier", points = { { 0.3, 0 },     { 0.8, 0.15 } } })
+hl.curve("overshot",      { type = "bezier", points = { { 0.05, 0.9 },  { 0.1, 1.1 } } })
+hl.curve("crazyshot",     { type = "bezier", points = { { 0.1, 1.5 },   { 0.76, 0.92 } } })
+hl.curve("hyprnostretch", { type = "bezier", points = { { 0.05, 0.9 },  { 0.1, 1.0 } } })
+hl.curve("fluent_decel",  { type = "bezier", points = { { 0.1, 1 },     { 0, 1 } } })
+hl.curve("easeInOutCirc", { type = "bezier", points = { { 0.85, 0 },    { 0.15, 1 } } })
+hl.curve("easeOutCirc",   { type = "bezier", points = { { 0, 0.55 },    { 0.45, 1 } } })
+hl.curve("easeOutExpo",   { type = "bezier", points = { { 0.16, 1 },    { 0.3, 1 } } })
+
+hl.animation({ leaf = "windows",     enabled = true, speed = 3,   bezier = "md3_decel", style = "popin 60%" })
+hl.animation({ leaf = "border",      enabled = true, speed = 10,  bezier = "default" })
+hl.animation({ leaf = "fade",        enabled = true, speed = 2.5, bezier = "md3_decel" })
+hl.animation({ leaf = "workspaces",  enabled = true, speed = 3.5, bezier = "easeOutExpo", style = "slide" })
+hl.animation({ leaf = "specialWorkspace", enabled = true, speed = 3, bezier = "md3_decel", style = "slidevert" })

dotfiles/.config/hypr/presets/anim-ml4w-high.lua

@@ -0,0 +1,20 @@
+-- HyprFlux — https://github.com/ahmad9059/HyprFlux
+-- name "High"
+-- credit https://github.com/mylinuxforwork/dotfiles
+-- Ported from animations/ML4W - high.conf (unused preset — not required by anything)
+
+hl.config({ animations = { enabled = true } })
+
+hl.curve("wind",   { type = "bezier", points = { { 0.05, 0.9 }, { 0.1, 1.05 } } })
+hl.curve("winIn",  { type = "bezier", points = { { 0.1, 1.1 },  { 0.1, 1.1 } } })
+hl.curve("winOut", { type = "bezier", points = { { 0.3, -0.3 }, { 0, 1 } } })
+hl.curve("liner",  { type = "bezier", points = { { 1, 1 },      { 1, 1 } } })
+
+hl.animation({ leaf = "windows",     enabled = true, speed = 6, bezier = "wind",   style = "slide" })
+hl.animation({ leaf = "windowsIn",   enabled = true, speed = 6, bezier = "winIn",  style = "slide" })
+hl.animation({ leaf = "windowsOut",  enabled = true, speed = 5, bezier = "winOut", style = "slide" })
+hl.animation({ leaf = "windowsMove", enabled = true, speed = 5, bezier = "wind",   style = "slide" })
+hl.animation({ leaf = "border",      enabled = true, speed = 1,  bezier = "liner" })
+hl.animation({ leaf = "borderangle", enabled = true, speed = 30, bezier = "liner", style = "once" })
+hl.animation({ leaf = "fade",        enabled = true, speed = 10, bezier = "default" })
+hl.animation({ leaf = "workspaces",  enabled = true, speed = 5,  bezier = "wind" })

dotfiles/.config/hypr/presets/anim-ml4w-moving.lua

@@ -0,0 +1,19 @@
+-- HyprFlux — https://github.com/ahmad9059/HyprFlux
+-- name "Moving"
+-- credit https://github.com/mylinuxforwork/dotfiles
+-- Ported from animations/ML4W - moving.conf (unused preset — not required by anything)
+
+hl.config({ animations = { enabled = true } })
+
+hl.curve("overshot",  { type = "bezier", points = { { 0.05, 0.9 }, { 0.1, 1.05 } } })
+hl.curve("smoothOut", { type = "bezier", points = { { 0.5, 0 },    { 0.99, 0.99 } } })
+hl.curve("smoothIn",  { type = "bezier", points = { { 0.5, -0.5 }, { 0.68, 1.5 } } })
+
+hl.animation({ leaf = "windows",     enabled = true, speed = 5, bezier = "overshot",  style = "slide" })
+hl.animation({ leaf = "windowsOut",  enabled = true, speed = 3, bezier = "smoothOut" })
+hl.animation({ leaf = "windowsIn",   enabled = true, speed = 3, bezier = "smoothOut" })
+hl.animation({ leaf = "windowsMove", enabled = true, speed = 4, bezier = "smoothIn", style = "slide" })
+hl.animation({ leaf = "border",      enabled = true, speed = 5, bezier = "default" })
+hl.animation({ leaf = "fade",        enabled = true, speed = 5, bezier = "smoothIn" })
+hl.animation({ leaf = "fadeDim",     enabled = true, speed = 5, bezier = "smoothIn" })
+hl.animation({ leaf = "workspaces",  enabled = true, speed = 6, bezier = "default" })

dotfiles/.config/hypr/presets/anim-ml4w-standard.lua

@@ -0,0 +1,15 @@
+-- HyprFlux — https://github.com/ahmad9059/HyprFlux
+-- name "Standard"
+-- credit https://github.com/mylinuxforwork/dotfiles
+-- Ported from animations/ML4W - standard.conf (unused preset — not required by anything)
+
+hl.config({ animations = { enabled = true } })
+
+hl.curve("myBezier", { type = "bezier", points = { { 0.05, 0.9 }, { 0.1, 1.05 } } })
+
+hl.animation({ leaf = "windows",     enabled = true, speed = 7, bezier = "myBezier" })
+hl.animation({ leaf = "windowsOut",  enabled = true, speed = 7, bezier = "default", style = "popin 80%" })
+hl.animation({ leaf = "border",      enabled = true, speed = 10, bezier = "default" })
+hl.animation({ leaf = "borderangle", enabled = true, speed = 8,  bezier = "default" })
+hl.animation({ leaf = "fade",        enabled = true, speed = 7, bezier = "default" })
+hl.animation({ leaf = "workspaces",  enabled = true, speed = 6, bezier = "default" })

dotfiles/.config/hypr/scripts/FloatBitwardenPopup.sh

@@ -0,0 +1,73 @@
+#!/bin/bash
+# Float + resize (to 781x702) + center the Bitwarden browser-extension pop-out window.
+#
+# Why this exists instead of a window rule: Hyprland's `float`/`center`/`size`
+# rules are "static" — evaluated exactly once, at the instant a window is
+# created — and this popup opens with the generic title "Zen Browser" (same
+# initialTitle/initialClass as the main browser window), only updating to
+# "Extension: (Bitwarden Password Manager) - Bitwarden..." a moment after
+# it's already mapped. By then the static rule has already missed its one
+# chance and there's no field available at creation time to tell the popup
+# apart from a normal browser window. See layout/windowrules.lua and
+# https://github.com/hyprwm/Hyprland/issues/7402 for the same problem class.
+#
+# No socat/ncat is installed, so instead of an event-driven IPC listener this
+# just polls `hyprctl clients` at a short interval with jq (already
+# installed).
+#
+# Dispatch syntax note: Hyprland 0.55+'s Lua config changed `hyprctl dispatch`
+# to take a literal Lua expression calling hl.dsp.* (e.g.
+# `hyprctl dispatch 'hl.dsp.window.center()'`), not the old
+# "centerwindow"-style dispatcher strings. Verified live against the real
+# API in /usr/share/hypr/stubs/hl.meta.lua before wiring this in.
+#
+# Why it re-asserts for a few seconds instead of firing once: right after the
+# popup leaves the tiled layout, Hyprland briefly re-tiles the sibling window
+# to fill the freed space, and during that reflow this popup was observed
+# reporting `floating: false` again for one poll tick — snapping it back to
+# its old tiled geometry. Re-asserting float+center for a short settle window
+# after first detection rides that out. After the settle window it's left
+# alone, so a manual re-tile/move by you later isn't fought.
+
+TITLE_PATTERN='Extension: \(Bitwarden Password Manager\)'
+POLL_INTERVAL=0.3
+SETTLE_TICKS=6 # ~2s of re-assertion after first detection, at POLL_INTERVAL
+TARGET_WIDTH=781
+TARGET_HEIGHT=702
+
+declare -A ticks_left # address -> remaining re-assert ticks
+
+while true; do
+    sleep "$POLL_INTERVAL"
+
+    # Forget any tracked window that's no longer open.
+    open_addresses=$(hyprctl clients -j | jq -r '.[].address')
+    for addr in "${!ticks_left[@]}"; do
+        grep -qF "$addr" <<<"$open_addresses" || unset 'ticks_left[$addr]'
+    done
+
+    # Process substitution (not a pipe) so the while loop runs in this shell
+    # and its writes to ticks_left actually persist across iterations.
+    while IFS= read -r win; do
+        title=$(jq -r '.title' <<<"$win")
+        [[ "$title" =~ $TITLE_PATTERN ]] || continue
+
+        address=$(jq -r '.address' <<<"$win")
+        floating=$(jq -r '.floating' <<<"$win")
+
+        # First time we've seen this window: start its settle window.
+        [[ -v ticks_left[$address] ]] || ticks_left[$address]=$SETTLE_TICKS
+
+        # Already floating and past its settle window: leave it alone.
+        [[ "$floating" == "true" && ${ticks_left[$address]} -le 0 ]] && continue
+
+        hyprctl dispatch "hl.dsp.focus({ window = \"address:$address\" })" >/dev/null
+        hyprctl dispatch 'hl.dsp.window.float({ action = "enable" })' >/dev/null
+        # resize({x=W,y=H}) sets the absolute size (not a delta) — verified live.
+        # Must happen before center(), since resizing shifts what "centered" means.
+        hyprctl dispatch "hl.dsp.window.resize({ x = $TARGET_WIDTH, y = $TARGET_HEIGHT })" >/dev/null
+        hyprctl dispatch 'hl.dsp.window.center()' >/dev/null
+
+        ticks_left[$address]=$((ticks_left[$address] - 1))
+    done < <(hyprctl clients -j | jq -c '.[] | {address, title, floating}')
+done

dotfiles/.config/ohmyposh/zen.toml

@@ -31,6 +31,14 @@ console_title_template = '{{ .Shell }} in {{ .Folder }}'
       commit_icon = '@'
       fetch_status = true
 
+  [[blocks.segments]]
+    type = "pnpm"
+    style = "powerline"
+    powerline_symbol = "❯"
+    foreground = "blue"
+    background = "transparent"
+    template = " {{ .Full }} "
+
   [[blocks.segments]]
     type = 'docker'
     style = 'powerline'

dotfiles/.config/quickshell/config/Appearance.qml

@@ -0,0 +1,29 @@
+pragma Singleton
+import QtQuick
+
+QtObject {
+    readonly property string fontFamily: "CaskaydiaCove Nerd Font Mono"
+    readonly property string iconFontFamily: "Material Symbols Outlined"
+    // Same glyph set, softer/rounded terminals — used where a module wants
+    // a visually distinct icon style from the rest of the bar (currently
+    // just BluetoothIndicator.qml) without switching every icon over.
+    readonly property string iconFontFamilyRounded: "Material Symbols Rounded"
+    // Material Symbols is a variable font. Left unset, glyphs fall back to the
+    // font's default optical size (24px), which is tuned for larger rendering
+    // and makes some icons (e.g. "lock") look heavier/bigger than others when
+    // drawn small — pin "opsz" near the actual render size to keep icons
+    // visually consistent. See Appearance.iconSize for the matching pixelSize.
+    readonly property var iconFontAxes: ({ "FILL": 0, "wght": 400, "GRAD": 0, "opsz": 20 })
+    readonly property int iconSize: 16
+
+    readonly property int fontSize: 13
+    readonly property int fontSizeSmall: 11
+
+    readonly property int radius: 14
+    readonly property int radiusSmall: 8
+
+    readonly property int barHeight: 34
+    readonly property int spacing: 10
+
+    readonly property int animationDuration: 150
+}

dotfiles/.config/quickshell/config/Colors.qml

@@ -0,0 +1,62 @@
+pragma Singleton
+import QtQuick
+import Quickshell
+import Quickshell.Io
+
+// Wallpaper-driven palette, sourced from pywal's ~/.cache/wal/colors.json.
+// Run `wal -i /path/to/wallpaper.png` to (re)generate it — this file watches
+// the cache and updates live, no shell restart needed. Until that's been run
+// once, everything falls back to a hand-picked dark palette below.
+QtObject {
+    id: root
+
+    readonly property bool active: _parsed !== null
+    property var _parsed: null
+
+    // --- Fallback palette (used until pywal has run) ---
+    readonly property color fallbackBg: "#1a1b26"
+    readonly property color fallbackFg: "#c0caf5"
+    readonly property var fallbackPalette: [
+        "#15161e", "#f7768e", "#9ece6a", "#e0af68",
+        "#7aa2f7", "#bb9af7", "#7dcfff", "#a9b1d6",
+        "#414868", "#f7768e", "#9ece6a", "#e0af68",
+        "#7aa2f7", "#bb9af7", "#7dcfff", "#c0caf5"
+    ]
+
+    function paletteColor(i) {
+        if (_parsed && _parsed.colors)
+            return _parsed.colors["color" + i] || fallbackPalette[i]
+        return fallbackPalette[i]
+    }
+
+    readonly property color background: _parsed && _parsed.special ? _parsed.special.background : fallbackBg
+    readonly property color foreground: _parsed && _parsed.special ? _parsed.special.foreground : fallbackFg
+    readonly property color primary: paletteColor(4)
+    // Named primaryText (not "onPrimary") because QML treats any "onXxx"
+    // identifier as a signal handler slot, not a regular property.
+    readonly property color primaryText: background
+    readonly property color urgent: paletteColor(1)
+    // paletteColor(8) alone renders quite dark/low-contrast for text (it's
+    // meant as a muted *background* tone in most wal palettes) — lighten it
+    // so muted labels stay legible against the bar's dark background.
+    readonly property color muted: Qt.lighter(paletteColor(8), 2.2)
+    readonly property color surface: Qt.lighter(background, 1.35)
+
+    // QtObject has no default property, so the FileView is attached via a
+    // property assignment rather than as a plain child element.
+    readonly property FileView _walFile: FileView {
+        path: Quickshell.env("HOME") + "/.cache/wal/colors.json"
+        watchChanges: true
+        onLoaded: {
+            try {
+                root._parsed = JSON.parse(text())
+            } catch (e) {
+                console.warn("Colors: failed to parse pywal cache:", e)
+                root._parsed = null
+            }
+        }
+        onLoadFailed: (error) => {
+            root._parsed = null
+        }
+    }
+}

dotfiles/.config/quickshell/config/VpnExclusivity.qml

@@ -0,0 +1,16 @@
+pragma Singleton
+import QtQuick
+
+// Tailscale, Mullvad, and ProtonVPN all fight over the default route/DNS if
+// more than one is active at once (see VpnIndicator.qml's header comment) —
+// only one of the three should ever actually be connected. This singleton
+// is the shared signal between the two widget files: VpnIndicator.qml
+// writes Mullvad/ProtonVPN's live connection state here as it polls them;
+// TailscaleIndicator.qml reads it to back off (`tailscale down`) rather
+// than stay up alongside either one, and to refuse turning Tailscale back
+// on while one is still connected.
+QtObject {
+    property bool mullvadConnected: false
+    property bool protonConnected: false
+    readonly property bool commercialVpnActive: mullvadConnected || protonConnected
+}

dotfiles/.config/quickshell/config/qmldir

@@ -0,0 +1,4 @@
+module config
+singleton Colors 1.0 Colors.qml
+singleton Appearance 1.0 Appearance.qml
+singleton VpnExclusivity 1.0 VpnExclusivity.qml

dotfiles/.config/quickshell/modules/bar/ActiveWindow.qml

@@ -0,0 +1,13 @@
+import QtQuick
+import QtQuick.Layouts
+import Quickshell.Hyprland
+import "../../config"
+
+Text {
+    Layout.maximumWidth: 320
+    elide: Text.ElideRight
+    font.family: Appearance.fontFamily
+    font.pixelSize: Appearance.fontSizeSmall
+    color: Colors.muted
+    text: Hyprland.activeToplevel ? Hyprland.activeToplevel.title : ""
+}

dotfiles/.config/quickshell/modules/bar/Bar.qml

@@ -0,0 +1,58 @@
+import Quickshell
+import Quickshell.Wayland
+import QtQuick
+import QtQuick.Layouts
+import "../../config"
+
+PanelWindow {
+    id: bar
+
+    anchors {
+        top: true
+        left: true
+        right: true
+    }
+    implicitHeight: Appearance.barHeight
+    exclusiveZone: implicitHeight
+    color: "transparent"
+
+    WlrLayershell.layer: WlrLayer.Top
+    WlrLayershell.namespace: "quickshell:bar"
+
+    Rectangle {
+        anchors.fill: parent
+        color: Colors.background
+    }
+
+    RowLayout {
+        anchors {
+            left: parent.left
+            verticalCenter: parent.verticalCenter
+            leftMargin: Appearance.spacing
+        }
+        spacing: Appearance.spacing
+        Workspaces { screen: bar.screen }
+        ActiveWindow {}
+    }
+
+    Clock {
+        anchors.centerIn: parent
+    }
+
+    RowLayout {
+        anchors {
+            right: parent.right
+            verticalCenter: parent.verticalCenter
+            rightMargin: Appearance.spacing
+        }
+        spacing: Appearance.spacing
+        //Tray {}
+        TailscaleIndicator { barWindow: bar }
+        VpnIndicator { barWindow: bar }
+        NetworkIndicator { barWindow: bar }
+        BluetoothIndicator { barWindow: bar }
+        Volume { barWindow: bar }
+        BatteryIndicator { barWindow: bar }
+        PowerButton { barWindow: bar }
+    }
+}

dotfiles/.config/quickshell/modules/bar/BatteryIndicator.qml

@@ -0,0 +1,605 @@
+import QtQuick
+import QtQuick.Layouts
+import Quickshell
+import Quickshell.Hyprland
+import Quickshell.Io
+import Quickshell.Services.UPower
+import "../../config"
+
+// Battery + power-profile panel, ported from omarchy's power panel
+// (github.com/basecamp/omarchy shell/plugins/panels/power/{Model.js,Panel.qml})
+// onto this project's own conventions: Quickshell's native UPower/PowerProfiles
+// bindings instead of omarchy's `omarchy-battery-status` /
+// `omarchy-powerprofiles-list` / `omarchy-powerprofiles-set` helper scripts
+// (which don't exist outside omarchy), and Material Symbols glyphs instead of
+// Nerd Font ones. The charge-threshold ("Holding"/limited-charge) concept from
+// the original is hardware-specific (vendor charge-limit sysfs knobs) and has
+// no equivalent in Quickshell's UPower binding, so it's dropped rather than
+// guessed at; "Battery health" (computed from sysfs energy_full/design) is shown in its
+// place, using data UPower actually reports.
+Item {
+    id: root
+
+    readonly property var device: UPower.displayDevice
+    // isLaptopBattery (type === Battery && powerSupply === true) is the
+    // Quickshell-recommended check for "is this actually a battery" — more
+    // precise than isPresent, which the docs note is only meaningful once
+    // you already know the device is of Battery type.
+    readonly property bool batteryPresent: !!(root.device && root.device.ready && root.device.isLaptopBattery)
+
+    // Hidden entirely on a desktop with no battery — RowLayout skips
+    // invisible children for both sizing and spacing, so this just vanishes
+    // from the bar rather than leaving a gap.
+    visible: root.batteryPresent
+    implicitWidth: root.batteryPresent ? label.implicitWidth : 0
+    implicitHeight: Appearance.barHeight
+
+    // The bar's own PanelWindow — passed in from Bar.qml so this popup can
+    // anchor to the bar itself rather than to this icon, keeping it a fixed
+    // distance from the bar and the screen edge regardless of where this
+    // icon sits in the row.
+    required property var barWindow
+
+    readonly property bool onBattery: UPower.onBattery
+    // Named deviceState, not "state" — Item already has a built-in `state`
+    // property (the property-based state-machine one) that this would
+    // otherwise collide with.
+    readonly property int deviceState: root.batteryPresent ? root.device.state : UPowerDeviceState.Unknown
+    readonly property bool fullyCharged: root.deviceState === UPowerDeviceState.FullyCharged
+    readonly property bool charging: root.batteryPresent && !root.onBattery && !root.fullyCharged
+    // device.percentage is a 0..1 fraction despite the name (same convention
+    // Volume.qml relies on for Pipewire's audio.volume).
+    readonly property real fraction: root.batteryPresent ? Math.max(0, Math.min(1, root.device.percentage)) : 0
+    readonly property bool low: root.batteryPresent && root.fraction <= 0.15 && !root.charging
+
+    // Quickshell's UPower binding has no charge-cycle property (see the
+    // file-header comment on why the old charge-until threshold was
+    // dropped) — it comes straight from sysfs instead.
+    //
+    // device.nativePath turned out to be empty on real hardware (tested
+    // live), so rather than build a path from it, a shell glob finds
+    // whichever BAT* directory actually exists — same shell-out-to-a-CLI
+    // convention TailscaleIndicator.qml uses for its own live stats.
+    // This barely changes during a session, so one read at startup is
+    // enough; no polling timer.
+    property int cycleCount: -1
+
+    Process {
+        id: cycleCountProc
+        command: ["sh", "-c", "cat \"$(ls -d /sys/class/power_supply/BAT* 2>/dev/null | head -n1)/cycle_count\" 2>/dev/null"]
+        running: root.batteryPresent
+        stdout: StdioCollector {
+            id: cycleCountCollector
+            onStreamFinished: {
+                const n = parseInt(cycleCountCollector.text.trim(), 10)
+                root.cycleCount = (isNaN(n) || n <= 0) ? -1 : n
+            }
+        }
+    }
+
+    // device.healthPercentage/healthSupported come from upowerd over D-Bus,
+    // and upowerd has been observed reporting energy-full as a flat 0 (a
+    // live daemon glitch, `upower -i` shows it too) while sysfs still has
+    // the real numbers underneath — same class of unreliability that put
+    // cycle_count on sysfs above instead of trusting upowerd's own
+    // charge-cycles field. Health is computed the same way UPower computes
+    // it (current full-charge capacity over the battery's original design
+    // capacity), just read directly so a daemon hiccup doesn't blank it.
+    property real energyFullWh: -1
+    property real energyFullDesignWh: -1
+    readonly property real healthPercent: (root.energyFullWh > 0 && root.energyFullDesignWh > 0)
+        ? Math.min(100, (root.energyFullWh / root.energyFullDesignWh) * 100) : -1
+
+    Process {
+        id: energyFullProc
+        command: ["sh", "-c", "cat \"$(ls -d /sys/class/power_supply/BAT* 2>/dev/null | head -n1)/energy_full\" 2>/dev/null"]
+        running: root.batteryPresent
+        stdout: StdioCollector {
+            id: energyFullCollector
+            onStreamFinished: {
+                const n = parseFloat(energyFullCollector.text.trim())
+                root.energyFullWh = (isNaN(n) || n <= 0) ? -1 : (n / 1000000)
+            }
+        }
+    }
+
+    Process {
+        id: energyFullDesignProc
+        command: ["sh", "-c", "cat \"$(ls -d /sys/class/power_supply/BAT* 2>/dev/null | head -n1)/energy_full_design\" 2>/dev/null"]
+        running: root.batteryPresent
+        stdout: StdioCollector {
+            id: energyFullDesignCollector
+            onStreamFinished: {
+                const n = parseFloat(energyFullDesignCollector.text.trim())
+                root.energyFullDesignWh = (isNaN(n) || n <= 0) ? -1 : (n / 1000000)
+            }
+        }
+    }
+
+    // device.timeToFull/timeToEmpty are computed by Quickshell from
+    // energy/energyCapacity/changeRate — when upowerd's EnergyFull glitches
+    // to 0 (the same daemon flake HEALTH routes around above), that formula
+    // divides by a bogus capacity and comes out negative rather than a
+    // real estimate (confirmed live: timeToFull sat at -3751 while `upower
+    // -i` itself still reported a normal 26.7 minutes). This recomputes
+    // the same estimate straight from sysfs as a fallback, only used when
+    // Quickshell's own value isn't positive. Unlike cycle_count/design
+    // capacity above, energy_now and power_now change continuously while
+    // (dis)charging, so this polls on a timer instead of reading once.
+    property real sysfsEnergyNowWh: -1
+    property real sysfsPowerNowW: -1
+
+    readonly property real fallbackTimeToFullSeconds: (root.sysfsPowerNowW > 0 && root.energyFullWh > 0 && root.sysfsEnergyNowWh >= 0)
+        ? Math.max(0, (root.energyFullWh - root.sysfsEnergyNowWh) / root.sysfsPowerNowW * 3600) : -1
+    readonly property real fallbackTimeToEmptySeconds: (root.sysfsPowerNowW > 0 && root.sysfsEnergyNowWh > 0)
+        ? (root.sysfsEnergyNowWh / root.sysfsPowerNowW * 3600) : -1
+
+    // Prefers upowerd's own live estimate when it's sane; only falls back
+    // to the sysfs-computed one when upowerd's has gone zero/negative.
+    readonly property real timeRemainingSeconds: {
+        const primary = root.onBattery ? root.device.timeToEmpty : root.device.timeToFull
+        if (primary > 0) return primary
+        return root.onBattery ? root.fallbackTimeToEmptySeconds : root.fallbackTimeToFullSeconds
+    }
+
+    Timer {
+        id: sysfsRateTimer
+        interval: 15000
+        repeat: true
+        running: root.batteryPresent
+        triggeredOnStart: true
+        onTriggered: {
+            if (!sysfsEnergyNowProc.running) sysfsEnergyNowProc.running = true
+            if (!sysfsPowerNowProc.running) sysfsPowerNowProc.running = true
+        }
+    }
+
+    Process {
+        id: sysfsEnergyNowProc
+        command: ["sh", "-c", "cat \"$(ls -d /sys/class/power_supply/BAT* 2>/dev/null | head -n1)/energy_now\" 2>/dev/null"]
+        stdout: StdioCollector {
+            id: sysfsEnergyNowCollector
+            onStreamFinished: {
+                const n = parseFloat(sysfsEnergyNowCollector.text.trim())
+                root.sysfsEnergyNowWh = (isNaN(n) || n < 0) ? -1 : (n / 1000000)
+            }
+        }
+    }
+
+    Process {
+        id: sysfsPowerNowProc
+        command: ["sh", "-c", "cat \"$(ls -d /sys/class/power_supply/BAT* 2>/dev/null | head -n1)/power_now\" 2>/dev/null"]
+        stdout: StdioCollector {
+            id: sysfsPowerNowCollector
+            onStreamFinished: {
+                const n = parseFloat(sysfsPowerNowCollector.text.trim())
+                root.sysfsPowerNowW = (isNaN(n) || n <= 0) ? -1 : (n / 1000000)
+            }
+        }
+    }
+
+    // Raw UPower state string (Charging/Discharging/PendingCharge/…) — more
+    // granular than modeLabel below, which collapses those down to the
+    // three phrases the hero text and STATE row show.
+    readonly property string rawStateLabel: root.batteryPresent
+        ? UPowerDeviceState.toString(root.deviceState) : "—"
+
+    // Material Symbols' charging glyphs aren't an evenly-spaced "_bar"
+    // scale like the non-charging ones below — they're fixed at these
+    // seven breakpoints (confirmed against the installed font's ligature
+    // table), so this picks the highest one at or below the current
+    // percentage rather than rounding to an index.
+    function chargingIcon(fraction) {
+        const percent = fraction * 100
+        const thresholds = [20, 30, 50, 60, 80, 90, 100]
+        const icons = [
+            "battery_charging_20", "battery_charging_30", "battery_charging_50", "battery_charging_60",
+            "battery_charging_80", "battery_charging_90", "battery_charging_full"
+        ]
+        for (let i = thresholds.length - 1; i >= 0; i--) {
+            if (percent >= thresholds[i]) return icons[i]
+        }
+        // Below 20% there's no lower charging glyph — it's still the
+        // truthful floor of what's available while current is flowing in.
+        return icons[0]
+    }
+
+    function batteryIcon() {
+        if (!root.batteryPresent) return "battery_unknown"
+        if (root.fullyCharged) return "battery_full"
+        if (root.charging) return root.chargingIcon(root.fraction)
+        if (root.fraction <= 0.1) return "battery_alert"
+        const bars = ["battery_0_bar", "battery_1_bar", "battery_2_bar", "battery_3_bar", "battery_4_bar", "battery_5_bar", "battery_full"]
+        return bars[Math.max(0, Math.min(bars.length - 1, Math.round(root.fraction * (bars.length - 1))))]
+    }
+
+    function formatDuration(seconds) {
+        const s = Math.max(0, Math.round(seconds || 0))
+        if (s <= 0) return "—"
+        const h = Math.floor(s / 3600)
+        const m = Math.round((s % 3600) / 60)
+        return h > 0 ? (h + "h " + m + "m") : (m + "m")
+    }
+
+    readonly property string modeLabel: {
+        if (!root.batteryPresent) return ""
+        if (root.fullyCharged) return "Fully charged"
+        return root.onBattery ? "On battery" : "Charging"
+    }
+
+    // Info grid rows — same shape as NetworkIndicator.qml's statRows/
+    // statCells: a flat label/value list, flattened again into individual
+    // grid cells (label, value, label, value, …) so a 4-column GridLayout
+    // lays them out as two label/value pairs per row.
+    readonly property var statRows: [
+        {
+            label: "HEALTH",
+            value: root.healthPercent > 0 ? Math.round(root.healthPercent) + "%" : "—"
+        },
+        {
+            label: root.onBattery ? "TIME LEFT" : "TIME TO FULL",
+            value: root.batteryPresent ? root.formatDuration(root.timeRemainingSeconds) : "—"
+        },
+        { label: "STATUS", value: root.rawStateLabel },
+        { label: "CYCLES", value: root.cycleCount > 0 ? String(root.cycleCount) : "—" }
+    ]
+
+    readonly property var statCells: {
+        const cells = []
+        for (let i = 0; i < root.statRows.length; i++) {
+            cells.push({ text: root.statRows[i].label, isLabel: true })
+            cells.push({ text: root.statRows[i].value, isLabel: false })
+        }
+        return cells
+    }
+
+    // Cute rotating status phrases while current is actually flowing —
+    // ported as-is from omarchy's power panel, which pairs the same phrase
+    // sets with the same charging/on-battery states.
+    readonly property var chargingPhrases: [
+        "Pumping power", "Injecting electrons", "Pouring juice", "Amassing watts",
+        "Hoarding joules", "Sucking volts", "Topping reserves", "Soaking amps", "Inhaling kilowatts"
+    ]
+    readonly property var onBatteryPhrases: [
+        "Slurping power", "Spending joules", "Draining watts", "Burning electrons",
+        "Sipping juice", "Spending coulombs", "Bleeding amps", "Guzzling volts", "Munching reserves"
+    ]
+    readonly property var activePhrases: root.fullyCharged ? []
+        : (root.charging ? root.chargingPhrases : (root.onBattery ? root.onBatteryPhrases : []))
+    readonly property bool rotatingPhrases: root.activePhrases.length > 0
+    property int phraseIndex: 0
+    readonly property string heroStatusText: root.rotatingPhrases
+        ? root.activePhrases[root.phraseIndex % root.activePhrases.length]
+        : root.modeLabel
+
+    // Only rotates while the panel is open and actually charging/discharging.
+    Timer {
+        id: phraseTimer
+        interval: 2800
+        running: panel.visible && root.rotatingPhrases
+        repeat: true
+        triggeredOnStart: false
+        onTriggered: phraseSwap.restart()
+    }
+
+    SequentialAnimation {
+        id: phraseSwap
+        PropertyAnimation { target: heroStatus; property: "opacity"; to: 0.0; duration: 180; easing.type: Easing.OutQuad }
+        ScriptAction {
+            script: {
+                const n = root.activePhrases.length
+                if (n > 0) root.phraseIndex = (root.phraseIndex + 1) % n
+            }
+        }
+        PropertyAnimation { target: heroStatus; property: "opacity"; to: 1.0; duration: 260; easing.type: Easing.InQuad }
+    }
+
+    // If we leave a rotating state mid-swap (e.g. unplugged mid-fade),
+    // snap back to full opacity so the new state reads immediately.
+    Connections {
+        target: root
+        function onRotatingPhrasesChanged() {
+            if (!root.rotatingPhrases) {
+                phraseSwap.stop()
+                heroStatus.opacity = 1.0
+            }
+        }
+    }
+
+    // --- Power profile list ------------------------------------------------
+    // power-profiles-daemon only ever exposes these three fixed profiles;
+    // Performance is conditional on hasPerformanceProfile (e.g. absent on
+    // battery-only/thermally-limited hardware) — same gating omarchy's own
+    // Model.js applies via its profile-list script.
+    readonly property var profileEntries: {
+        const entries = [
+            { value: PowerProfile.PowerSaver, label: "Saver", icon: "eco" },
+            { value: PowerProfile.Balanced, label: "Balanced", icon: "balance" }
+        ]
+        if (PowerProfiles.hasPerformanceProfile)
+            entries.push({ value: PowerProfile.Performance, label: "Performance", icon: "bolt" })
+        return entries
+    }
+
+    // --- Automatic power profile --------------------------------------
+    // Battery-state-driven, on top of the manual picker above: below 20%
+    // → Power Saver (protect what's left), plugged in → Performance,
+    // unplugged and healthy → Balanced. Low battery wins even if a weak
+    // charger is still plugged in — running low is the more urgent signal.
+    // Performance only gets requested when the daemon actually reports it
+    // as available, falling back to Balanced instead of erroring on
+    // hardware without a performance profile (e.g. the ERROR this exact
+    // widget hit before power-profiles-daemon was installed).
+    //
+    // This only ever writes when the *target* changes (crossing the 20%
+    // line, plugging/unplugging) rather than on every poll, so a manual
+    // pick from the buttons above still sticks until the next real
+    // transition instead of being fought immediately.
+    readonly property int desiredProfile: {
+        if (root.fraction <= 0.20) return PowerProfile.PowerSaver
+        if (!root.onBattery) return PowerProfiles.hasPerformanceProfile ? PowerProfile.Performance : PowerProfile.Balanced
+        return PowerProfile.Balanced
+    }
+
+    function applyDesiredProfile() {
+        if (!root.batteryPresent) return
+        if (PowerProfiles.profile !== root.desiredProfile) PowerProfiles.profile = root.desiredProfile
+    }
+
+    onDesiredProfileChanged: root.applyDesiredProfile()
+    Component.onCompleted: Qt.callLater(root.applyDesiredProfile)
+
+    Text {
+        id: label
+        anchors.centerIn: parent
+        font.family: Appearance.iconFontFamilyRounded
+        font.variableAxes: Appearance.iconFontAxes
+        font.pixelSize: 16
+        color: root.low ? Colors.urgent : Colors.foreground
+        text: root.batteryIcon()
+    }
+
+    MouseArea {
+        anchors.fill: parent
+        cursorShape: Qt.PointingHandCursor
+        onClicked: {
+            panel.visible = !panel.visible
+            grab.active = panel.visible
+        }
+    }
+
+    // --- Reusable pieces -----------------------------------------------
+
+    component ProfileButton: Rectangle {
+        id: profBtn
+        required property string label
+        required property string icon
+        required property bool active
+        signal activate()
+        width: parent ? parent.width : 0
+        radius: 0
+        implicitHeight: 44
+        color: mouse.containsMouse ? Colors.primary
+             : (profBtn.active ? Qt.rgba(Colors.primary.r, Colors.primary.g, Colors.primary.b, 0.18) : "transparent")
+
+        // Hover-only outline, offset outside the button rather than drawn on
+        // its own edge — same treatment as this project's other selectable
+        // rows (e.g. Volume.qml's DeviceRow).
+        Rectangle {
+            anchors.fill: parent
+            anchors.margins: -3
+            radius: 0
+            color: "transparent"
+            border.color: Colors.foreground
+            border.width: mouse.containsMouse ? 1 : 0
+        }
+
+        Column {
+            anchors.centerIn: parent
+            spacing: 2
+            Text {
+                anchors.horizontalCenter: parent.horizontalCenter
+                text: profBtn.icon
+                font.family: Appearance.iconFontFamilyRounded
+                font.variableAxes: Appearance.iconFontAxes
+                font.pixelSize: 18
+                color: mouse.containsMouse ? Colors.primaryText : Colors.foreground
+            }
+            Text {
+                anchors.horizontalCenter: parent.horizontalCenter
+                text: profBtn.label
+                font.family: Appearance.fontFamily
+                font.pixelSize: Appearance.fontSizeSmall
+                font.bold: profBtn.active
+                color: mouse.containsMouse ? Colors.primaryText : Colors.foreground
+            }
+        }
+
+        MouseArea {
+            id: mouse
+            anchors.fill: parent
+            hoverEnabled: true
+            cursorShape: Qt.PointingHandCursor
+            onClicked: profBtn.activate()
+        }
+    }
+
+    // --- Panel -----------------------------------------------------------
+
+    PopupWindow {
+        id: panel
+        visible: false
+        color: "transparent"
+        // Wider than before (244) to give the 2-column info grid's
+        // label/value pairs enough room per half without eliding —
+        // same reasoning as NetworkIndicator.qml's own wider panel.
+        readonly property int contentWidth: 280
+        readonly property int contentPadding: 16
+        implicitWidth: contentWidth + contentPadding * 2
+        implicitHeight: mainColumn.implicitHeight + contentPadding * 2
+
+        anchor {
+            window: root.barWindow
+            // Unlike anchor.item, anchor.window doesn't default rect to the
+            // window's own bounds — set it explicitly so edges/gravity below
+            // resolve against the full bar (and thus the true screen edges)
+            // instead of a near-zero rect at the window's origin.
+            rect.x: 0
+            rect.y: 0
+            rect.width: root.barWindow.width
+            rect.height: root.barWindow.height
+            edges: Edges.Bottom | Edges.Right
+            gravity: Edges.Bottom | Edges.Left
+            margins.bottom: -4
+            margins.right: 0
+        }
+
+        HyprlandFocusGrab {
+            id: grab
+            windows: [panel]
+            onCleared: panel.visible = false
+        }
+
+        Rectangle {
+            anchors.fill: parent
+            radius: 0
+            color: Colors.surface
+            border.color: Colors.muted
+            border.width: 3
+
+            Column {
+                id: mainColumn
+                anchors.fill: parent
+                anchors.margins: panel.contentPadding
+                spacing: 10
+
+                // Hero: icon · title/status · percentage
+                RowLayout {
+                    width: parent.width
+                    spacing: 10
+
+                    Text {
+                        text: root.batteryIcon()
+                        font.family: Appearance.iconFontFamilyRounded
+                        font.variableAxes: Appearance.iconFontAxes
+                        font.pixelSize: 30
+                        color: root.low ? Colors.urgent : Colors.foreground
+                    }
+
+                    Column {
+                        Layout.fillWidth: true
+                        spacing: 2
+                        Text {
+                            width: parent.width
+                            text: "Battery"
+                            elide: Text.ElideRight
+                            font.family: Appearance.fontFamily
+                            font.pixelSize: 18
+                            font.bold: true
+                            color: Colors.foreground
+                        }
+                        Text {
+                            id: heroStatus
+                            width: parent.width
+                            text: root.heroStatusText
+                            elide: Text.ElideRight
+                            font.family: Appearance.fontFamily
+                            font.pixelSize: Appearance.fontSizeSmall
+                            color: Colors.muted
+                        }
+                    }
+
+                    Text {
+                        text: Math.round(root.fraction * 100) + "%"
+                        font.family: Appearance.fontFamily
+                        font.pixelSize: 20
+                        font.bold: true
+                        color: Colors.foreground
+                    }
+                }
+
+                // Charge level bar
+                Item {
+                    width: parent.width
+                    height: 4
+
+                    Rectangle {
+                        anchors.fill: parent
+                        radius: 0
+                        color: Colors.muted
+                        opacity: 0.35
+                    }
+                    Rectangle {
+                        anchors.left: parent.left
+                        anchors.top: parent.top
+                        anchors.bottom: parent.bottom
+                        radius: 0
+                        color: root.low ? Colors.urgent : Colors.primary
+                        width: Math.max(height, parent.width * root.fraction)
+                        Behavior on width { NumberAnimation { duration: 320; easing.type: Easing.OutCubic } }
+                    }
+                }
+
+                // Stats — a 2-column, 2-row info grid, same layout
+                // NetworkIndicator.qml uses for its own live stats: a
+                // 4-column GridLayout fed a flattened label/value/label/value
+                // list, so each row holds two label/value pairs side by side
+                // with the values right-aligned against their own half.
+                GridLayout {
+                    width: parent.width
+                    columns: 4
+                    columnSpacing: 12
+                    rowSpacing: 5
+
+                    Repeater {
+                        model: root.statCells
+                        Text {
+                            required property var modelData
+                            Layout.fillWidth: !modelData.isLabel
+                            horizontalAlignment: modelData.isLabel ? Text.AlignLeft : Text.AlignRight
+                            text: modelData.text
+                            font.family: Appearance.fontFamily
+                            font.pixelSize: Appearance.fontSizeSmall
+                            color: modelData.isLabel ? Colors.muted : Colors.foreground
+                        }
+                    }
+                }
+
+                // Power profile picker
+                Column {
+                    width: parent.width
+                    spacing: 6
+
+                    Text {
+                        text: "POWER PROFILE"
+                        font.family: Appearance.fontFamily
+                        font.pixelSize: Appearance.fontSizeSmall
+                        color: Colors.muted
+                    }
+
+                    Row {
+                        id: profileRow
+                        width: parent.width
+                        spacing: 6
+
+                        readonly property real cellWidth: root.profileEntries.length > 0
+                            ? (width - spacing * (root.profileEntries.length - 1)) / root.profileEntries.length
+                            : 0
+
+                        Repeater {
+                            model: root.profileEntries
+                            ProfileButton {
+                                required property var modelData
+                                width: profileRow.cellWidth
+                                label: modelData.label
+                                icon: modelData.icon
+                                active: PowerProfiles.profile === modelData.value
+                                onActivate: PowerProfiles.profile = modelData.value
+                            }
+                        }
+                    }
+                }
+            }
+        }
+    }
+}

dotfiles/.config/quickshell/modules/bar/BluetoothIndicator.qml

@@ -0,0 +1,795 @@
+import QtQuick
+import QtQuick.Layouts
+import Quickshell
+import Quickshell.Hyprland
+import Quickshell.Bluetooth
+import "../../config"
+
+Item {
+    id: root
+    // Independent left/right breathing room around the glyph. Material
+    // Symbols icons aren't monospaced — each one's font-reported advance
+    // width (label.implicitWidth) bakes in its own side bearings, so the
+    // same "+4, centered" math that every other bar icon uses can still
+    // look tighter/looser icon-to-icon. Tune these two by eye instead of
+    // the icon's own bounding box to even it out against its neighbours.
+    property real iconLeftPadding: 0
+    property real iconRightPadding: 0
+    implicitWidth: root.iconLeftPadding + label.implicitWidth + root.iconRightPadding
+    implicitHeight: Appearance.barHeight
+
+    // The bar's own PanelWindow — passed in from Bar.qml so this popup can
+    // anchor to the bar itself rather than to this icon, keeping it a fixed
+    // distance from the bar and the screen edge regardless of where this
+    // icon sits in the row.
+    required property var barWindow
+
+    readonly property var adapter: Bluetooth.defaultAdapter
+
+    // Scan only while the panel is open — same convention as the WiFi
+    // scannerEnabled binding in NetworkIndicator.qml.
+    Binding {
+        target: root.adapter
+        property: "discovering"
+        value: panel.visible && root.adapter.enabled
+        when: root.adapter !== null
+    }
+
+    // --- Device row helpers ----------------------------------------------
+    // Rows are plain objects rather than the live BluetoothDevice QObject —
+    // BlueZ churn (pairing timeouts, a device dropping out of range mid-scan)
+    // can destroy the object while a delegate still holds it, the same
+    // crash risk noted for WiFi networks in NetworkIndicator.qml. The actual
+    // object is re-resolved by address only when an action needs it, via
+    // deviceForAddress().
+    function deviceLabel(d) {
+        return (d.deviceName || d.name || d.address || "").trim()
+    }
+
+    // BlueZ's Icon property is a freedesktop icon-theme name (verified
+    // against a real paired device on this machine: "audio-headset") — map
+    // the common categories to a Material Symbols glyph, falling back to a
+    // generic "devices_other" for anything unrecognized.
+    function deviceIcon(icon) {
+        const i = icon || ""
+        if (i.indexOf("headset") !== -1 || i.indexOf("headphone") !== -1) return "headphones"
+        if (i.indexOf("mouse") !== -1) return "mouse"
+        if (i.indexOf("keyboard") !== -1) return "keyboard"
+        if (i.indexOf("gaming") !== -1 || i.indexOf("joystick") !== -1) return "sports_esports"
+        if (i.indexOf("tablet") !== -1) return "tablet"
+        if (i.indexOf("camera") !== -1) return "videocam"
+        if (i.indexOf("printer") !== -1) return "print"
+        if (i.indexOf("watch") !== -1) return "watch"
+        if (i.indexOf("tv") !== -1) return "tv"
+        if (i.indexOf("computer") !== -1) return "computer"
+        if (i.indexOf("card") !== -1) return "speaker"
+        return "devices_other"
+    }
+
+    function deviceRow(d) {
+        if (!d) return null
+        const label = root.deviceLabel(d)
+        if (!label) return null
+        return {
+            address: d.address || "",
+            label: label,
+            icon: root.deviceIcon(d.icon),
+            connected: !!d.connected,
+            paired: !!d.paired,
+            bonded: !!d.bonded,
+            trusted: !!d.trusted,
+            pairing: !!d.pairing,
+            state: d.state,
+            batteryAvailable: !!d.batteryAvailable,
+            battery: d.battery || 0
+        }
+    }
+
+    readonly property var deviceRows: root.adapter
+        ? root.adapter.devices.values.map(root.deviceRow).filter(function(r) { return r !== null })
+        : []
+
+    readonly property var connectedRows: root.deviceRows.filter(function(r) { return r.connected })
+    readonly property var knownRows: root.deviceRows.filter(function(r) {
+        return !r.connected && (r.paired || r.bonded || r.trusted)
+    })
+    readonly property var discoveredRows: root.deviceRows.filter(function(r) {
+        return !r.connected && !r.paired && !r.bonded && !r.trusted
+    })
+
+    function deviceForAddress(address) {
+        if (!root.adapter) return null
+        const devs = root.adapter.devices.values
+        for (let i = 0; i < devs.length; i++) {
+            if (devs[i].address === address) return devs[i]
+        }
+        return null
+    }
+
+    // --- Action feedback ---------------------------------------------------
+    // BlueZ operations here are fire-and-forget from QML's side — connect()/
+    // disconnect()/pair()/forget() report failure only via a C++-side log
+    // line (see quickshell's bluetooth/device.cpp), nothing reaches QML. So
+    // "did it work" has to be inferred from the device's own properties
+    // instead of a success/failure callback. Shown as a line right under the
+    // specific row it's about (DeviceRow.statusText below) rather than a
+    // panel-wide banner — actionStatusAddress is how a row knows a message
+    // is meant for it; since it's address-keyed rather than tied to a
+    // particular DeviceRow instance, the message still finds its row even
+    // when the device jumps sections (Paired → Connected on a successful
+    // connect, say), because that's a new DeviceRow for the same address.
+    //  - busyStatus is purely reactive — it just reads pairing/state off
+    //    whichever row is currently mid-operation, however that operation
+    //    was triggered. It's not shown directly (each row already derives
+    //    the same "Connecting…"/"Disconnecting…" off its own dev.state);
+    //    it only exists here to tell resolvePendingAction when to fire.
+    //  - pendingAction+the busyStatus watcher below is how a *specific*
+    //    click gets its own outcome message: it snapshots what was asked
+    //    for, waits for busyStatus to clear, then checks whether the
+    //    expected end state (connected/paired) actually landed.
+    readonly property string busyStatus: {
+        for (const r of root.deviceRows) {
+            if (r.pairing) return "pairing:" + r.address
+            if (r.state === BluetoothDeviceState.Connecting) return "connecting:" + r.address
+            if (r.state === BluetoothDeviceState.Disconnecting) return "disconnecting:" + r.address
+        }
+        return ""
+    }
+
+    property var pendingAction: null
+    property string actionStatus: ""
+    property string actionStatusAddress: ""
+
+    // Checks whether pendingAction's expected end state actually landed and
+    // reports it, then clears pendingAction. Called both when busyStatus
+    // clears normally and from pendingTimeoutTimer below — an operation
+    // that resolves inside a single binding re-evaluation (a device already
+    // in range reconnecting near-instantly, say) can flip busyStatus from ""
+    // straight back to "" without ever visibly changing, which would
+    // otherwise leave pendingAction stuck forever and misattribute whatever
+    // busyStatus transition happens to come along next.
+    function resolvePendingAction() {
+        if (!root.pendingAction) return
+        const p = root.pendingAction
+        root.pendingAction = null
+        const d = root.deviceForAddress(p.address)
+        root.actionStatusAddress = p.address
+        if (p.kind === "disconnect") {
+            root.actionStatus = (d && !d.connected) ? "Disconnected" : "Couldn't disconnect"
+        } else if (p.kind === "pair") {
+            root.actionStatus = (d && d.paired) ? "Paired" : "Couldn't pair"
+        } else {
+            root.actionStatus = (d && d.connected) ? "Connected" : "Couldn't connect"
+        }
+        actionStatusTimer.restart()
+    }
+
+    onBusyStatusChanged: if (root.busyStatus === "") root.resolvePendingAction()
+
+    Timer {
+        id: actionStatusTimer
+        interval: 3500
+        repeat: false
+        onTriggered: root.actionStatus = ""
+    }
+
+    // Backstop for the "resolved before busyStatus ever visibly changed"
+    // case above, and a genuine timeout for an operation that's just stuck
+    // (device out of range, etc.) — either way, restarted whenever
+    // pendingAction is (re)set, so it always reflects the latest click.
+    Timer {
+        id: pendingTimeoutTimer
+        interval: 8000
+        repeat: false
+        onTriggered: root.resolvePendingAction()
+    }
+
+    function connectDevice(row) {
+        const d = root.deviceForAddress(row.address)
+        if (!d) return
+        // Already-paired devices just reconnect; a fresh discovery result
+        // has to pair first (BlueZ's own agent handles the SSP/passkey
+        // handshake — there's no PIN-entry surface exposed by this API).
+        if (row.paired || row.bonded || row.trusted) {
+            root.pendingAction = { address: row.address, kind: "connect" }
+            pendingTimeoutTimer.restart()
+            d.connect()
+        } else {
+            root.pendingAction = { address: row.address, kind: "pair" }
+            pendingTimeoutTimer.restart()
+            d.pair()
+        }
+    }
+
+    function disconnectDevice(row) {
+        const d = root.deviceForAddress(row.address)
+        if (!d) return
+        root.pendingAction = { address: row.address, kind: "disconnect" }
+        pendingTimeoutTimer.restart()
+        d.disconnect()
+    }
+
+    function forgetDevice(row) {
+        const d = root.deviceForAddress(row.address)
+        if (!d) return
+        if (d.connected) d.disconnect()
+        d.forget()
+        // No feedback line here — forgetting removes this row from every
+        // list immediately, so there's nothing left to show a message
+        // under. The row vanishing is the confirmation.
+    }
+
+    function setTrusted(row, trusted) {
+        const d = root.deviceForAddress(row.address)
+        if (!d) return
+        d.trusted = trusted
+        root.actionStatusAddress = row.address
+        root.actionStatus = trusted ? "Trusting" : "No longer trusting"
+        actionStatusTimer.restart()
+    }
+
+    readonly property bool anyConnected: root.connectedRows.length > 0
+
+    // Caps how tall the Paired/Available list gets before it scrolls
+    // instead of continuing to grow the popup — same convention as
+    // NetworkIndicator.qml's Known/Other Networks list.
+    readonly property int maxDeviceListHeight: 260
+
+    Text {
+        id: label
+        anchors.verticalCenter: parent.verticalCenter
+        anchors.left: parent.left
+        anchors.leftMargin: root.iconLeftPadding
+        font.family: Appearance.iconFontFamilyRounded
+        font.variableAxes: Appearance.iconFontAxes
+        font.pixelSize: 16
+        color: (root.adapter && root.adapter.enabled) ? Colors.foreground : Colors.muted
+        text: {
+            if (!root.adapter || !root.adapter.enabled) return "bluetooth_disabled"
+            return root.anyConnected ? "bluetooth_connected" : "bluetooth"
+        }
+    }
+
+    MouseArea {
+        anchors.fill: parent
+        cursorShape: Qt.PointingHandCursor
+        onClicked: {
+            panel.visible = !panel.visible
+            grab.active = panel.visible
+        }
+    }
+
+    // --- Reusable pieces ---------------------------------------------------
+
+    component ToggleSwitch: Item {
+        id: toggleRoot
+        property bool checked: false
+        signal toggled()
+        implicitWidth: 34
+        implicitHeight: 18
+
+        Rectangle {
+            anchors.fill: parent
+            radius: 0
+            color: toggleRoot.checked ? Colors.primary : Colors.muted
+            opacity: toggleRoot.checked ? 1 : 0.35
+        }
+        // Hover-only outline, offset outside the switch itself rather than
+        // drawn on its edge — the switch lags behind a click until the
+        // backend confirms it (e.g. the adapter's enabled state), so this
+        // is just a "you can click this" cue, not click feedback.
+        Rectangle {
+            anchors.fill: parent
+            anchors.margins: -4
+            radius: 0
+            color: "transparent"
+            border.color: Colors.foreground
+            border.width: toggleMouse.containsMouse ? 1 : 0
+        }
+        Rectangle {
+            width: parent.height - 4
+            height: parent.height - 4
+            radius: 0
+            color: Colors.background
+            anchors.verticalCenter: parent.verticalCenter
+            x: toggleRoot.checked ? parent.width - width - 2 : 2
+            Behavior on x { NumberAnimation { duration: Appearance.animationDuration } }
+        }
+        MouseArea {
+            id: toggleMouse
+            anchors.fill: parent
+            hoverEnabled: true
+            cursorShape: Qt.PointingHandCursor
+            onClicked: toggleRoot.toggled()
+        }
+    }
+
+    // One device row. `showForget` gates the whole trailing action cluster —
+    // trust toggle, disconnect, forget — for discovered-but-unpaired devices,
+    // which have none of those to act on yet (a plain click there pairs
+    // instead, via activate()). For a paired/connected row, the row body
+    // itself still connects/disconnects (activate()) same as before; the
+    // actions below are the explicit, discoverable versions of that plus
+    // the two this row previously had no way to reach at all.
+    component DeviceRow: Rectangle {
+        id: devRow
+        required property var dev
+        property bool showForget: true
+        signal activate()
+        width: parent ? parent.width : 0
+        radius: 0
+        implicitHeight: rowContent.implicitHeight + 12
+
+        // Which action icon (if any) the pointer is currently over — drives
+        // both that icon's own hover color below and rowMouse's click
+        // dispatch. Derived from rowMouse.mouseX/containsMouse rather than a
+        // MouseArea on each icon: those icons live inside rowContent, which
+        // sits underneath rowMouse in stacking order, so a nested MouseArea
+        // there would just be shadowed by it (same reason
+        // NetworkIndicator.qml's NetworkRow dispatches by position too).
+        // Checked right-to-left since that's the order the icons are laid
+        // out in, so an earlier icon's "from here to the row's right edge"
+        // zone doesn't swallow the ones after it.
+        readonly property string hoveredAction: {
+            if (!rowMouse.containsMouse) return ""
+            if (devRow.showForget && forgetIcon.visible
+                && rowMouse.mouseX >= devRow.mapFromItem(forgetIcon, 0, 0).x - 8) return "forget"
+            if (devRow.showForget && trustIcon.visible
+                && rowMouse.mouseX >= devRow.mapFromItem(trustIcon, 0, 0).x - 8) return "trust"
+            if (disconnectIcon.visible
+                && rowMouse.mouseX >= devRow.mapFromItem(disconnectIcon, 0, 0).x - 8) return "disconnect"
+            return ""
+        }
+        // Hover checked first (same ordering as Volume.qml's DeviceRow):
+        // hovering always shows a solid Colors.primary fill, even for an
+        // already-connected row, so the primaryText used below never has to
+        // sit on top of the dimmer translucent tint instead.
+        color: rowMouse.containsMouse ? Colors.primary
+            : (devRow.dev.connected ? Qt.rgba(Colors.primary.r, Colors.primary.g, Colors.primary.b, 0.18) : "transparent")
+
+        // Hover-only outline, offset outside the row rather than drawn on
+        // its own edge — same treatment as NetworkIndicator.qml's NetworkRow.
+        // The lists this feeds are inset by 3px (see deviceListColumn and
+        // the Connected section below) so this has room without being
+        // cropped by deviceListFlick's clip.
+        Rectangle {
+            anchors.fill: parent
+            anchors.margins: -3
+            radius: 0
+            color: "transparent"
+            border.color: Colors.foreground
+            border.width: rowMouse.containsMouse ? 1 : 0
+        }
+
+        RowLayout {
+            id: rowContent
+            anchors.left: parent.left
+            anchors.right: parent.right
+            anchors.verticalCenter: parent.verticalCenter
+            anchors.margins: 6
+            spacing: 8
+
+            Text {
+                Layout.preferredWidth: 20
+                Layout.minimumWidth: 20
+                Layout.maximumWidth: 20
+                horizontalAlignment: Text.AlignLeft
+                text: devRow.dev.icon
+                font.family: Appearance.iconFontFamilyRounded
+                font.variableAxes: Appearance.iconFontAxes
+                font.pixelSize: 14
+                color: rowMouse.containsMouse ? Colors.primaryText : Colors.foreground
+            }
+
+            ColumnLayout {
+                Layout.fillWidth: true
+                spacing: 0
+
+                Text {
+                    Layout.fillWidth: true
+                    text: devRow.dev.label
+                    elide: Text.ElideRight
+                    font.family: Appearance.fontFamily
+                    font.pixelSize: Appearance.fontSize
+                    font.bold: devRow.dev.connected
+                    color: rowMouse.containsMouse ? Colors.primaryText : Colors.foreground
+                }
+                Text {
+                    readonly property string statusText: {
+                        if (devRow.dev.pairing) return "Pairing…"
+                        if (devRow.dev.state === BluetoothDeviceState.Connecting) return "Connecting…"
+                        if (devRow.dev.state === BluetoothDeviceState.Disconnecting) return "Disconnecting…"
+                        // The outcome of the last action taken on this
+                        // specific device (connect/disconnect/pair/trust) —
+                        // see the "Action feedback" comment above
+                        // root.busyStatus. Matched by address rather than by
+                        // this being "the same row" that was clicked, since
+                        // a successful connect/disconnect moves the device
+                        // to a different section (a new DeviceRow entirely).
+                        if (root.actionStatusAddress === devRow.dev.address && root.actionStatus !== "")
+                            return root.actionStatus
+                        if (devRow.dev.connected && devRow.dev.batteryAvailable)
+                            return Math.round(devRow.dev.battery * 100) + "%"
+                        if (devRow.dev.connected) return "Connected"
+                        return ""
+                    }
+                    visible: statusText !== ""
+                    text: statusText
+                    font.family: Appearance.fontFamily
+                    font.pixelSize: Appearance.fontSizeSmall
+                    color: rowMouse.containsMouse ? Colors.primaryText : Colors.muted
+                }
+            }
+
+            // Each action below is a fixed-size slot with its own
+            // hover-halo outline — offset outside the slot rather than drawn
+            // on its own edge, same treatment as devRow's own outline above
+            // and every other hoverable box in this file (ToggleSwitch,
+            // DeviceRow itself, etc.) — instead of just the color swap the
+            // row's own icons get.
+
+            // Disconnect without forgetting — same effect as clicking the
+            // row body on a Connected row (activate() below calls
+            // disconnectDevice too), just given its own explicit, always-
+            // visible icon instead of relying on that being guessed.
+            Item {
+                id: disconnectIcon
+                visible: devRow.showForget && devRow.dev.connected
+                Layout.preferredWidth: 20
+                Layout.preferredHeight: 20
+
+                Rectangle {
+                    anchors.fill: parent
+                    anchors.margins: -3
+                    radius: 0
+                    color: "transparent"
+                    border.color: Colors.foreground
+                    border.width: devRow.hoveredAction === "disconnect" ? 1 : 0
+                }
+                Text {
+                    anchors.centerIn: parent
+                    text: "link_off"
+                    font.family: Appearance.iconFontFamilyRounded
+                    font.variableAxes: Appearance.iconFontAxes
+                    font.pixelSize: 14
+                    // Stays primaryText (dark) rather than switching to
+                    // Colors.primary while targeted — devRow's own fill is
+                    // already Colors.primary on hover, so that would've put
+                    // a primary-colored glyph on a primary-colored
+                    // background. The outline Rectangle above is what shows
+                    // which slot is targeted.
+                    color: rowMouse.containsMouse ? Colors.primaryText : Colors.muted
+                }
+            }
+
+            // Trust toggle — full brightness when trusted, dimmed when not,
+            // same "state via opacity" convention PowerButton.qml uses for
+            // its disabled entries.
+            Item {
+                id: trustIcon
+                visible: devRow.showForget
+                Layout.preferredWidth: 20
+                Layout.preferredHeight: 20
+
+                Rectangle {
+                    anchors.fill: parent
+                    anchors.margins: -3
+                    radius: 0
+                    color: "transparent"
+                    border.color: Colors.foreground
+                    border.width: devRow.hoveredAction === "trust" ? 1 : 0
+                }
+                Text {
+                    anchors.centerIn: parent
+                    text: "verified_user"
+                    opacity: devRow.dev.trusted ? 1 : 0.4
+                    font.family: Appearance.iconFontFamilyRounded
+                    font.variableAxes: Appearance.iconFontAxes
+                    font.pixelSize: 14
+                    color: rowMouse.containsMouse ? Colors.primaryText : Colors.muted
+                }
+            }
+
+            Item {
+                id: forgetIcon
+                visible: devRow.showForget
+                Layout.preferredWidth: 20
+                Layout.preferredHeight: 20
+
+                Rectangle {
+                    anchors.fill: parent
+                    anchors.margins: -3
+                    radius: 0
+                    color: "transparent"
+                    border.color: Colors.foreground
+                    border.width: devRow.hoveredAction === "forget" ? 1 : 0
+                }
+                Text {
+                    anchors.centerIn: parent
+                    text: "close"
+                    font.family: Appearance.iconFontFamilyRounded
+                    font.variableAxes: Appearance.iconFontAxes
+                    font.pixelSize: 14
+                    color: rowMouse.containsMouse ? Colors.primaryText : Colors.muted
+                }
+            }
+        }
+
+        MouseArea {
+            id: rowMouse
+            anchors.left: parent.left
+            anchors.right: parent.right
+            anchors.top: parent.top
+            height: rowContent.height + 12
+            hoverEnabled: true
+            cursorShape: Qt.PointingHandCursor
+            // Dispatches on devRow.hoveredAction rather than its own
+            // MouseArea per icon — see that property's comment above.
+            onClicked: {
+                switch (devRow.hoveredAction) {
+                case "forget": root.forgetDevice(devRow.dev); break
+                case "trust": root.setTrusted(devRow.dev, !devRow.dev.trusted); break
+                case "disconnect": root.disconnectDevice(devRow.dev); break
+                default: devRow.activate()
+                }
+            }
+        }
+    }
+
+    // --- Panel -------------------------------------------------------------
+
+    PopupWindow {
+        id: panel
+        visible: false
+        color: "transparent"
+        // Wider than the other panels' usual 244 — each device row now ends
+        // in a row of three 20px action slots (disconnect/trust/forget)
+        // instead of a single close icon, and the name column needs room to
+        // not immediately start eliding against that.
+        readonly property int contentWidth: 300
+        readonly property int contentPadding: 16
+        implicitWidth: contentWidth + contentPadding * 2
+        implicitHeight: mainColumn.implicitHeight + contentPadding * 2
+        // Connected/paired/discovered devices come and go while the panel
+        // is open — animate the resize instead of snapping, same as the
+        // network panel's WiFi list.
+        Behavior on implicitHeight {
+            NumberAnimation { duration: Appearance.animationDuration; easing.type: Easing.OutCubic }
+        }
+
+        anchor {
+            window: root.barWindow
+            rect.x: 0
+            rect.y: 0
+            rect.width: root.barWindow.width
+            rect.height: root.barWindow.height
+            edges: Edges.Bottom | Edges.Right
+            gravity: Edges.Bottom | Edges.Left
+            margins.bottom: -4
+            margins.right: 0
+        }
+
+        HyprlandFocusGrab {
+            id: grab
+            windows: [panel]
+            onCleared: panel.visible = false
+        }
+
+        Rectangle {
+            anchors.fill: parent
+            radius: 0
+            color: Colors.surface
+            border.color: Colors.muted
+            border.width: 3
+
+            Column {
+                id: mainColumn
+                anchors.fill: parent
+                anchors.margins: panel.contentPadding
+                spacing: 10
+
+                // Header
+                RowLayout {
+                    width: parent.width
+                    spacing: 8
+
+                    Text {
+                        text: label.text
+                        font.family: Appearance.iconFontFamilyRounded
+                        font.variableAxes: Appearance.iconFontAxes
+                        font.pixelSize: 21
+                        color: Colors.foreground
+                    }
+
+                    Text {
+                        Layout.fillWidth: true
+                        text: "Bluetooth"
+                        font.family: Appearance.fontFamily
+                        font.pixelSize: 18
+                        font.bold: true
+                        color: Colors.foreground
+                    }
+
+                    // Spins continuously while root.adapter.discovering is
+                    // true — a persistent "still searching" cue independent
+                    // of the list itself, unlike the "Scanning for devices…"
+                    // text below (which only shows while the device list is
+                    // still empty).
+                    Text {
+                        id: scanSpinner
+                        visible: root.adapter !== null && root.adapter.discovering
+                        text: "progress_activity"
+                        font.family: Appearance.iconFontFamilyRounded
+                        font.variableAxes: Appearance.iconFontAxes
+                        font.pixelSize: 16
+                        color: Colors.muted
+
+                        RotationAnimation on rotation {
+                            running: scanSpinner.visible
+                            loops: Animation.Infinite
+                            from: 0
+                            to: 360
+                            duration: 900
+                        }
+                    }
+
+                    ToggleSwitch {
+                        visible: root.adapter !== null
+                        checked: root.adapter !== null && root.adapter.enabled
+                        onToggled: root.adapter.enabled = !root.adapter.enabled
+                    }
+                }
+
+                Text {
+                    width: parent.width
+                    visible: root.adapter === null
+                    text: "No Bluetooth adapter"
+                    font.family: Appearance.fontFamily
+                    font.pixelSize: Appearance.fontSizeSmall
+                    color: Colors.muted
+                }
+
+                Text {
+                    width: parent.width
+                    visible: root.adapter !== null && !root.adapter.enabled
+                    text: "Turn Bluetooth on to see devices"
+                    font.family: Appearance.fontFamily
+                    font.pixelSize: Appearance.fontSizeSmall
+                    color: Colors.muted
+                }
+
+                // Connected — always shown in full above the scrollable
+                // list, mirroring the network panel's layout.
+                Column {
+                    width: parent.width
+                    spacing: 4
+                    visible: root.connectedRows.length > 0
+
+                    Text {
+                        text: "Connected"
+                        font.family: Appearance.fontFamily
+                        font.pixelSize: Appearance.fontSizeSmall
+                        color: Colors.muted
+                    }
+                    Column {
+                        // Inset 3px on each side to match deviceListColumn
+                        // below, so DeviceRow's hover halo has room here too.
+                        x: 3
+                        width: parent.width - 6
+                        spacing: 2
+                        Repeater {
+                            model: root.connectedRows
+                            DeviceRow {
+                                required property var modelData
+                                dev: modelData
+                                showForget: true
+                                onActivate: root.disconnectDevice(dev)
+                            }
+                        }
+                    }
+                }
+
+                // Paired — always shown in full, same as Connected above and
+                // for the same reason: these are one click away from
+                // reconnecting (root.connectDevice reconnects rather than
+                // re-pairing whenever a row is already paired/bonded/trusted),
+                // so they shouldn't be buried in the capped-height scroll area
+                // below or hidden behind an active scan turning up other
+                // nearby devices.
+                Column {
+                    width: parent.width
+                    spacing: 4
+                    visible: root.knownRows.length > 0
+
+                    Text {
+                        text: "Paired Devices"
+                        font.family: Appearance.fontFamily
+                        font.pixelSize: Appearance.fontSizeSmall
+                        color: Colors.muted
+                    }
+                    Column {
+                        // Inset 3px on each side to match deviceListColumn
+                        // below, so DeviceRow's hover halo has room here too.
+                        x: 3
+                        width: parent.width - 6
+                        spacing: 2
+                        Repeater {
+                            model: root.knownRows
+                            DeviceRow {
+                                required property var modelData
+                                dev: modelData
+                                showForget: true
+                                onActivate: root.connectDevice(dev)
+                            }
+                        }
+                    }
+                }
+
+                Text {
+                    width: parent.width
+                    visible: root.adapter !== null && root.adapter.enabled && root.deviceRows.length === 0
+                    text: (root.adapter && root.adapter.discovering) ? "Scanning for devices…" : "No devices found"
+                    font.family: Appearance.fontFamily
+                    font.pixelSize: Appearance.fontSizeSmall
+                    color: Colors.muted
+                }
+
+                // Available — freshly discovered, unpaired devices only.
+                // Capped height, scrolls once there are more than fit rather
+                // than growing the popup indefinitely.
+                Flickable {
+                    id: deviceListFlick
+                    width: parent.width
+                    height: Math.min(deviceListColumn.implicitHeight, root.maxDeviceListHeight)
+                    contentWidth: width
+                    contentHeight: deviceListColumn.implicitHeight
+                    clip: true
+                    boundsBehavior: Flickable.StopAtBounds
+                    visible: deviceListColumn.implicitHeight > 0
+
+                    Column {
+                        id: deviceListColumn
+                        // Inset 3px on every side so DeviceRow's hover halo
+                        // has room without being cropped by deviceListFlick's
+                        // clip. Left/right needs the manual x/width shift
+                        // (children bind width: parent.width, which ignores
+                        // Column's own padding); top/bottom just needs
+                        // padding, since that's along Column's own layout
+                        // axis and Flickable's contentHeight tracks it.
+                        x: 3
+                        width: deviceListFlick.width - 6
+                        topPadding: 3
+                        bottomPadding: 3
+                        spacing: 6
+
+                        Column {
+                            width: parent.width
+                            spacing: 4
+                            visible: root.adapter !== null && root.adapter.discovering && root.discoveredRows.length > 0
+
+                            Text {
+                                text: "Available Devices"
+                                font.family: Appearance.fontFamily
+                                font.pixelSize: Appearance.fontSizeSmall
+                                color: Colors.muted
+                            }
+                            Column {
+                                width: parent.width
+                                spacing: 2
+                                Repeater {
+                                    model: root.discoveredRows
+                                    DeviceRow {
+                                        required property var modelData
+                                        dev: modelData
+                                        showForget: false
+                                        onActivate: root.connectDevice(dev)
+                                    }
+                                }
+                            }
+                        }
+                    }
+                }
+            }
+        }
+    }
+}

dotfiles/.config/quickshell/modules/bar/Clock.qml

@@ -0,0 +1,18 @@
+import QtQuick
+import "../../config"
+
+Text {
+    id: root
+    font.family: Appearance.fontFamily
+    font.pixelSize: Appearance.fontSize
+    font.bold: true
+    color: Colors.foreground
+    text: Qt.formatDateTime(new Date(), "ddd d MMM  hh:mm")
+
+    Timer {
+        interval: 1000
+        running: true
+        repeat: true
+        onTriggered: root.text = Qt.formatDateTime(new Date(), "ddd d MMM  hh:mm")
+    }
+}

dotfiles/.config/quickshell/modules/bar/PowerButton.qml

@@ -0,0 +1,200 @@
+import QtQuick
+import QtQuick.Layouts
+import Quickshell
+import Quickshell.Io
+import Quickshell.Hyprland
+import "../../config"
+
+Item {
+    id: root
+    implicitWidth: label.implicitWidth + 2
+    implicitHeight: Appearance.barHeight
+
+    // The bar's own PanelWindow — passed in from Bar.qml so this popup can
+    // anchor to the bar itself rather than to this icon, keeping it a fixed
+    // distance from the bar and the screen edge regardless of where this
+    // icon sits in the row.
+    required property var barWindow
+
+    Text {
+        id: label
+        anchors.centerIn: parent
+        font.family: Appearance.iconFontFamilyRounded
+        font.variableAxes: Appearance.iconFontAxes
+        font.pixelSize: 16
+        color: Colors.foreground
+        text: "settings_power"
+    }
+
+    MouseArea {
+        anchors.fill: parent
+        cursorShape: Qt.PointingHandCursor
+        onClicked: {
+            menu.visible = !menu.visible
+            grab.active = menu.visible
+        }
+    }
+
+    Process { id: proc }
+
+    PopupWindow {
+        id: menu
+        visible: false
+        color: "transparent"
+        // Same contentWidth/contentPadding split as the other panels
+        // (Volume.qml, NetworkIndicator.qml, etc.) rather than a single
+        // magic implicitWidth.
+        readonly property int contentWidth: 178
+        readonly property int contentPadding: 16
+        implicitWidth: contentWidth + contentPadding * 2
+        implicitHeight: mainColumn.implicitHeight + contentPadding * 2
+
+        anchor {
+            window: root.barWindow
+            // Unlike anchor.item, anchor.window doesn't default rect to the
+            // window's own bounds — set it explicitly so edges/gravity below
+            // resolve against the full bar (and thus the true screen edges)
+            // instead of a near-zero rect at the window's origin.
+            rect.x: 0
+            rect.y: 0
+            rect.width: root.barWindow.width
+            rect.height: root.barWindow.height
+            edges: Edges.Bottom | Edges.Right
+            gravity: Edges.Bottom | Edges.Left
+            margins.bottom: -4
+            margins.right: 0
+        }
+
+        HyprlandFocusGrab {
+            id: grab
+            windows: [menu]
+            onCleared: menu.visible = false
+        }
+
+        Rectangle {
+            anchors.fill: parent
+            radius: 0
+            color: Colors.surface
+            border.color: Colors.muted
+            border.width: 3
+
+            Column {
+                id: mainColumn
+                anchors.fill: parent
+                anchors.margins: menu.contentPadding
+                spacing: 10
+
+                // Header — same title layout as Volume.qml's panel: the bar
+                // icon large, plus a bold title.
+                RowLayout {
+                    id: header
+                    width: parent.width
+                    spacing: 8
+
+                    Text {
+                        text: label.text
+                        font.family: Appearance.iconFontFamilyRounded
+                        font.variableAxes: Appearance.iconFontAxes
+                        font.pixelSize: 23
+                        color: Colors.foreground
+                    }
+
+                    Text {
+                        Layout.fillWidth: true
+                        text: "Power"
+                        font.family: Appearance.fontFamily
+                        font.pixelSize: 18
+                        font.bold: true
+                        color: Colors.foreground
+                    }
+                }
+
+                Column {
+                    width: parent.width
+                    spacing: 2
+
+                    Repeater {
+                        id: list
+                        model: [
+                            { label: "Lock", icon: "lock", cmd: ["hyprlock"] },
+                            { label: "Suspend", icon: "bedtime", cmd: ["systemctl", "suspend"] },
+                            { label: "Hibernate", icon: "ac_unit", cmd: ["systemctl", "hibernate"] },
+                            { label: "Log out", icon: "logout", cmd: ["hyprctl", "dispatch", "exit"] },
+                            { label: "Reboot", icon: "restart_alt", cmd: ["systemctl", "reboot"] },
+                            { label: "Shut down", icon: "power_settings_new", cmd: ["systemctl", "poweroff"] }
+                        ]
+
+                        // Same shape as this project's other selectable rows
+                        // (e.g. VpnIndicator.qml's ProviderRow,
+                        // TailscaleIndicator.qml's ExitNodeRow): radius 0, a
+                        // fixed-width icon column followed by a fillWidth
+                        // label, and an offset hover halo rather than one
+                        // drawn on the row's own edge.
+                        delegate: Rectangle {
+                            id: entry
+                            required property var modelData
+                            width: parent ? parent.width : 0
+                            radius: 0
+                            implicitHeight: entryContent.implicitHeight + 12
+                            color: (!entry.modelData.disabled && entryMouse.containsMouse) ? Colors.primary : "transparent"
+
+                            Rectangle {
+                                anchors.fill: parent
+                                anchors.margins: -3
+                                radius: 0
+                                color: "transparent"
+                                border.color: Colors.foreground
+                                border.width: entryMouse.containsMouse ? 1 : 0
+                            }
+
+                            RowLayout {
+                                id: entryContent
+                                anchors.left: parent.left
+                                anchors.right: parent.right
+                                anchors.verticalCenter: parent.verticalCenter
+                                anchors.margins: 6
+                                spacing: 8
+
+                                Text {
+                                    Layout.preferredWidth: 20
+                                    Layout.minimumWidth: 20
+                                    Layout.maximumWidth: 20
+                                    horizontalAlignment: Text.AlignLeft
+                                    text: entry.modelData.icon
+                                    font.family: Appearance.iconFontFamilyRounded
+                                    font.variableAxes: Appearance.iconFontAxes
+                                    font.pixelSize: 14
+                                    opacity: entry.modelData.disabled ? 0.4 : 1
+                                    color: entryMouse.containsMouse ? Colors.primaryText : Colors.foreground
+                                }
+                                Text {
+                                    Layout.fillWidth: true
+                                    text: entry.modelData.label
+                                    elide: Text.ElideRight
+                                    font.family: Appearance.fontFamily
+                                    font.pixelSize: Appearance.fontSize
+                                    opacity: entry.modelData.disabled ? 0.4 : 1
+                                    color: entryMouse.containsMouse ? Colors.primaryText : Colors.foreground
+                                }
+                            }
+
+                            MouseArea {
+                                id: entryMouse
+                                anchors.fill: parent
+                                enabled: !entry.modelData.disabled
+                                hoverEnabled: true
+                                cursorShape: Qt.PointingHandCursor
+                                onClicked: {
+                                    proc.command = entry.modelData.cmd
+                                    proc.running = true
+                                    menu.visible = false
+                                    grab.active = false
+                                }
+                            }
+                        }
+                    }
+                }
+            }
+        }
+    }
+}

dotfiles/.config/quickshell/modules/bar/Tray.qml

@@ -0,0 +1,32 @@
+import QtQuick
+import QtQuick.Layouts
+import Quickshell.Services.SystemTray
+import Quickshell.Widgets
+import "../../config"
+
+RowLayout {
+    spacing: Appearance.spacing * 0.6
+
+    Repeater {
+        model: SystemTray.items
+
+        delegate: IconImage {
+            id: trayIcon
+            required property var modelData
+            implicitWidth: 16
+            implicitHeight: 16
+            source: modelData.icon
+
+            MouseArea {
+                anchors.fill: parent
+                acceptedButtons: Qt.LeftButton | Qt.RightButton
+                onClicked: (mouse) => {
+                    if (mouse.button === Qt.LeftButton)
+                        trayIcon.modelData.activate()
+                    else
+                        trayIcon.modelData.secondaryActivate()
+                }
+            }
+        }
+    }
+}

dotfiles/.config/quickshell/modules/bar/Volume.qml

@@ -0,0 +1,496 @@
+import QtQuick
+import QtQuick.Layouts
+import Quickshell
+import Quickshell.Hyprland
+import Quickshell.Services.Pipewire
+import "../../config"
+
+Item {
+    id: root
+    implicitWidth: label.implicitWidth
+    implicitHeight: Appearance.barHeight
+
+    // The bar's own PanelWindow — passed in from Bar.qml so this popup can
+    // anchor to the bar itself rather than to this icon, keeping it a fixed
+    // distance from the bar and the screen edge regardless of where this
+    // icon sits in the row.
+    required property var barWindow
+
+    readonly property var sink: Pipewire.defaultAudioSink
+    readonly property var source: Pipewire.defaultAudioSource
+    readonly property var nodes: Pipewire.nodes ? Pipewire.nodes.values : []
+
+    readonly property real outputVolume: (root.sink && root.sink.audio) ? root.sink.audio.volume : 0
+    readonly property bool outputMuted: (root.sink && root.sink.audio) ? root.sink.audio.muted : false
+    readonly property real inputVolume: (root.source && root.source.audio) ? root.source.audio.volume : 0
+    readonly property bool inputMuted: (root.source && root.source.audio) ? root.source.audio.muted : false
+
+    readonly property var candidateSinks: root.nodes.filter(function(n) { return n && n.isSink && !n.isStream })
+    readonly property var candidateSources: root.nodes.filter(function(n) { return n && !n.isSink && !n.isStream && n.audio })
+
+    PwObjectTracker { objects: root.candidateSinks }
+    PwObjectTracker { objects: root.candidateSources }
+
+    // Live mic level for the input gauge below — separate from inputVolume
+    // (the configured gain), this tracks the actual incoming signal.
+    // Only runs while the panel is open, to skip metering when unused.
+    PwNodePeakMonitor {
+        id: inputPeak
+        node: root.source
+        enabled: panel.visible
+    }
+
+    PwNodePeakMonitor {
+        id: outputPeak
+        node: root.sink
+        enabled: panel.visible
+    }
+
+    // --- Device label/icon heuristics, ported from omarchy's audio panel
+    // Model.js (github.com/basecamp/omarchy shell/plugins/panels/audio/Model.js),
+    // adapted to this project's Material Symbols icon set instead of Nerd Font.
+    function friendlyDeviceLabel(text) {
+        var out = String(text || "").trim()
+        out = out.replace(/^sof-soundwire\s+/i, "")
+        out = out.replace(/^built-?in audio\s+/i, "")
+        out = out.replace(/\s+Output$/i, "")
+        out = out.replace(/\s+Input$/i, "")
+        out = out.replace(/Microphones/gi, "Microphone")
+        return out
+    }
+
+    function deviceLabel(node) {
+        if (!node) return "Unknown"
+        var nick = friendlyDeviceLabel(node.nickname || "")
+        if (nick) return nick
+        return friendlyDeviceLabel(node.description || node.name || "Unknown")
+    }
+
+    function deviceBlob(node) {
+        if (!node) return ""
+        var p = node.properties || {}
+        return [node.name, node.description, node.nickname,
+                p["device.icon-name"] || "", p["device.product.name"] || ""].join(" ").toLowerCase()
+    }
+
+    // Quickshell's Pipewire API only exposes a node's own properties, not
+    // its parent Device — so device.api (unlike device.form-factor or the
+    // richer device.icon-name, which only live on the Device object) is the
+    // one reliable Bluetooth signal actually present here: it's set on
+    // every node PipeWire hands off to a bluez5-backed sink/source. Checking
+    // it directly beats sniffing the word "bluetooth" out of node names,
+    // which usually just say "bluez_output..." and never match.
+    function isBluetoothNode(node) {
+        var p = (node && node.properties) || {}
+        return p["device.api"] === "bluez5"
+    }
+
+    // PipeWire's own device.form-factor (which would call ACCENTUM a
+    // "headset" outright) isn't reachable from here for the same reason —
+    // it lives on the Device object, not the node. And some devices (a
+    // generic USB DAC like an EKSA headset) have no form-factor anywhere in
+    // PipeWire at all, headset or not, so no property-based check can catch
+    // them. This override list is the deliberate manual escape hatch for
+    // exactly that case — add a distinctive substring from the product name
+    // (device.product.name/description, matched case-insensitively via
+    // deviceBlob) whenever a new no-metadata device shows up misclassified.
+    readonly property var headphoneNameOverrides: ["e900plus"]
+
+    function isHeadphoneNode(node) {
+        var blob = deviceBlob(node)
+        if (blob.indexOf("headphone") !== -1 || blob.indexOf("headset") !== -1
+            || blob.indexOf("earbud") !== -1 || blob.indexOf("earphone") !== -1
+            || blob.indexOf("airpod") !== -1)
+            return true
+        return root.headphoneNameOverrides.some(function(needle) { return blob.indexOf(needle) !== -1 })
+    }
+
+    function sinkIcon(node) {
+        if (!node) return "speaker"
+        if (isHeadphoneNode(node)) return "headphones"
+        if (isBluetoothNode(node)) return "bluetooth_audio"
+        var blob = deviceBlob(node)
+        if (blob.indexOf("hdmi") !== -1 || blob.indexOf("display") !== -1) return "tv"
+        return "speaker"
+    }
+
+    function sourceIcon(node) {
+        if (!node) return "mic"
+        if (isHeadphoneNode(node)) return "headphones"
+        if (isBluetoothNode(node)) return "bluetooth_audio"
+        var blob = deviceBlob(node)
+        if (blob.indexOf("webcam") !== -1 || blob.indexOf("camera") !== -1) return "videocam"
+        return "mic"
+    }
+
+    Text {
+        id: label
+        anchors.centerIn: parent
+        font.family: Appearance.iconFontFamilyRounded
+        font.variableAxes: Appearance.iconFontAxes
+        font.pixelSize: 18
+        color: Colors.foreground
+        text: (root.outputMuted || root.outputVolume <= 0) ? "volume_off"
+            : (root.outputVolume < 0.5 ? "volume_down" : "volume_up")
+    }
+
+    MouseArea {
+        anchors.fill: parent
+        cursorShape: Qt.PointingHandCursor
+        onClicked: {
+            panel.visible = !panel.visible
+            grab.active = panel.visible
+        }
+        onWheel: (wheel) => {
+            if (!root.sink || !root.sink.audio) return
+            const step = 0.05
+            const delta = wheel.angleDelta.y > 0 ? step : -step
+            root.sink.audio.volume = Math.max(0, Math.min(1, root.sink.audio.volume + delta))
+        }
+    }
+
+    // --- Reusable pieces -----------------------------------------------
+
+    component VolumeSlider: Item {
+        id: sliderRoot
+        property real value: 0
+        property bool enabled: true
+        signal moved(real newValue)
+        implicitHeight: 16
+
+        Rectangle {
+            id: track
+            anchors.verticalCenter: parent.verticalCenter
+            width: parent.width
+            height: 4
+            radius: 0
+            color: Colors.muted
+            opacity: 0.35
+        }
+        Rectangle {
+            anchors.verticalCenter: parent.verticalCenter
+            anchors.left: parent.left
+            width: track.width * Math.max(0, Math.min(1, sliderRoot.value))
+            height: 4
+            radius: 0
+            color: Colors.primary
+            opacity: sliderRoot.enabled ? 1 : 0.4
+        }
+        Rectangle {
+            width: 12
+            height: 12
+            radius: 6
+            color: Colors.primary
+            opacity: sliderRoot.enabled ? 1 : 0.4
+            anchors.verticalCenter: parent.verticalCenter
+            x: Math.max(0, Math.min(track.width - width, track.width * sliderRoot.value - width / 2))
+        }
+        MouseArea {
+            anchors.fill: parent
+            enabled: sliderRoot.enabled
+            cursorShape: Qt.PointingHandCursor
+            function updateFromX(mx) {
+                sliderRoot.moved(Math.max(0, Math.min(1, mx / track.width)))
+            }
+            onPressed: (mouse) => updateFromX(mouse.x)
+            onPositionChanged: (mouse) => { if (pressed) updateFromX(mouse.x) }
+        }
+    }
+
+    // Read-only live level gauge — same track styling as VolumeSlider but no
+    // handle/interaction, filled from an actual signal level instead of a
+    // configured value.
+    component LevelMeter: Item {
+        id: meterRoot
+        property real level: 0
+        implicitHeight: 4
+
+        Rectangle {
+            anchors.verticalCenter: parent.verticalCenter
+            width: parent.width
+            height: 4
+            radius: 0
+            color: Colors.muted
+            opacity: 0.25
+        }
+        Rectangle {
+            anchors.verticalCenter: parent.verticalCenter
+            anchors.left: parent.left
+            height: 4
+            radius: 0
+            color: Colors.paletteColor(2)
+            width: parent.width * Math.max(0, Math.min(1, meterRoot.level))
+            Behavior on width { NumberAnimation { duration: 80 } }
+        }
+    }
+
+    component ToggleSwitch: Item {
+        id: toggleRoot
+        property bool checked: false
+        signal toggled()
+        implicitWidth: 34
+        implicitHeight: 18
+
+        Rectangle {
+            anchors.fill: parent
+            radius: 0
+            color: toggleRoot.checked ? Colors.primary : Colors.muted
+            opacity: toggleRoot.checked ? 1 : 0.35
+        }
+        Rectangle {
+            width: parent.height - 4
+            height: parent.height - 4
+            radius: 0
+            color: Colors.background
+            anchors.verticalCenter: parent.verticalCenter
+            x: toggleRoot.checked ? parent.width - width - 2 : 2
+            Behavior on x { NumberAnimation { duration: Appearance.animationDuration } }
+        }
+        MouseArea {
+            anchors.fill: parent
+            cursorShape: Qt.PointingHandCursor
+            onClicked: toggleRoot.toggled()
+        }
+    }
+
+    component DeviceRow: Rectangle {
+        id: deviceRow
+        required property var node
+        required property string icon
+        required property bool active
+        signal activate()
+        width: parent ? parent.width : 0
+        height: 30
+        radius: 0
+        color: rowMouse.containsMouse ? Colors.primary
+             : (deviceRow.active ? Qt.rgba(Colors.primary.r, Colors.primary.g, Colors.primary.b, 0.18) : "transparent")
+
+        // Hover-only outline, offset outside the row rather than drawn on
+        // its own edge — same treatment as the other bar widgets' selectable
+        // rows (e.g. NetworkIndicator.qml's NetworkRow). Not inside a
+        // clipped Flickable here, so no inset needed on its container.
+        Rectangle {
+            anchors.fill: parent
+            anchors.margins: -3
+            radius: 0
+            color: "transparent"
+            border.color: Colors.foreground
+            border.width: rowMouse.containsMouse ? 1 : 0
+        }
+
+        RowLayout {
+            anchors.fill: parent
+            anchors.leftMargin: 8
+            anchors.rightMargin: 8
+            spacing: 8
+            Text {
+                Layout.preferredWidth: 18
+                Layout.minimumWidth: 18
+                Layout.maximumWidth: 18
+                horizontalAlignment: Text.AlignHCenter
+                text: deviceRow.icon
+                font.family: Appearance.iconFontFamilyRounded
+                font.variableAxes: Appearance.iconFontAxes
+                font.pixelSize: 14
+                color: rowMouse.containsMouse ? Colors.primaryText : Colors.foreground
+            }
+            Text {
+                Layout.fillWidth: true
+                text: root.deviceLabel(deviceRow.node)
+                elide: Text.ElideRight
+                font.family: Appearance.fontFamily
+                font.pixelSize: Appearance.fontSize
+                font.bold: deviceRow.active
+                color: rowMouse.containsMouse ? Colors.primaryText : Colors.foreground
+            }
+        }
+        MouseArea {
+            id: rowMouse
+            anchors.fill: parent
+            hoverEnabled: true
+            cursorShape: Qt.PointingHandCursor
+            onClicked: deviceRow.activate()
+        }
+    }
+
+    // --- Panel -----------------------------------------------------------
+
+    PopupWindow {
+        id: panel
+        visible: false
+        color: "transparent"
+        // Padding between the panel's border and its content. implicitWidth
+        // is contentWidth + padding on both sides, so the content area
+        // itself stays a fixed size regardless of how much padding surrounds it.
+        readonly property int contentWidth: 244
+        readonly property int contentPadding: 16
+        implicitWidth: contentWidth + contentPadding * 2
+        implicitHeight: mainColumn.implicitHeight + contentPadding * 2
+
+        anchor {
+            window: root.barWindow
+            // Unlike anchor.item, anchor.window doesn't default rect to the
+            // window's own bounds — set it explicitly so edges/gravity below
+            // resolve against the full bar (and thus the true screen edges)
+            // instead of a near-zero rect at the window's origin.
+            rect.x: 0
+            rect.y: 0
+            rect.width: root.barWindow.width
+            rect.height: root.barWindow.height
+            edges: Edges.Bottom | Edges.Right
+            gravity: Edges.Bottom | Edges.Left
+            margins.bottom: -4
+            margins.right: 0
+        }
+
+        HyprlandFocusGrab {
+            id: grab
+            windows: [panel]
+            onCleared: panel.visible = false
+        }
+
+        Rectangle {
+            anchors.fill: parent
+            radius: 0
+            color: Colors.surface
+            border.color: Colors.muted
+            border.width: 3
+
+            Column {
+                id: mainColumn
+                anchors.fill: parent
+                anchors.margins: panel.contentPadding - 2
+                spacing: 10
+
+                // Header
+                RowLayout {
+                    width: parent.width
+                    spacing: 8
+
+                    Text {
+                        text: label.text
+                        font.family: Appearance.iconFontFamilyRounded
+                        font.variableAxes: Appearance.iconFontAxes
+                        font.pixelSize: 30
+                        color: Colors.foreground
+                    }
+
+                    Text {
+                        Layout.fillWidth: true
+                        text: "Audio"
+                        font.family: Appearance.fontFamily
+                        font.pixelSize: 18
+                        font.bold: true
+                        color: Colors.foreground
+                    }
+
+                    ToggleSwitch {
+                        checked: !root.outputMuted
+                        onToggled: if (root.sink && root.sink.audio) root.sink.audio.muted = !root.sink.audio.muted
+                    }
+                }
+
+                // Output
+                Column {
+                    width: parent.width
+                    spacing: 6
+
+                    RowLayout {
+                        width: parent.width
+                        Text {
+                            Layout.fillWidth: true
+                            text: "OUTPUT"
+                            font.family: Appearance.fontFamily
+                            font.pixelSize: Appearance.fontSizeSmall
+                            color: Colors.muted
+                        }
+                        Text {
+                            text: Math.round(root.outputVolume * 100) + "%"
+                            font.family: Appearance.fontFamily
+                            font.pixelSize: Appearance.fontSizeSmall
+                            color: Colors.muted
+                        }
+                    }
+
+                    VolumeSlider {
+                        width: parent.width
+                        value: root.outputVolume
+                        enabled: !!root.sink
+                        onMoved: (v) => { if (root.sink && root.sink.audio) root.sink.audio.volume = v }
+                    }
+
+                    LevelMeter {
+                        width: parent.width
+                        level: outputPeak.peak
+                    }
+
+                    Column {
+                        width: parent.width
+                        spacing: 4
+                        Repeater {
+                            model: root.candidateSinks
+                            DeviceRow {
+                                required property var modelData
+                                node: modelData
+                                icon: root.sinkIcon(modelData)
+                                active: !!(root.sink && modelData && root.sink.id === modelData.id)
+                                onActivate: Pipewire.preferredDefaultAudioSink = modelData
+                            }
+                        }
+                    }
+                }
+
+                // Input
+                Column {
+                    width: parent.width
+                    spacing: 6
+
+                    RowLayout {
+                        width: parent.width
+                        Text {
+                            Layout.fillWidth: true
+                            text: "INPUT"
+                            font.family: Appearance.fontFamily
+                            font.pixelSize: Appearance.fontSizeSmall
+                            color: Colors.muted
+                        }
+                        Text {
+                            text: Math.round(root.inputVolume * 100) + "%"
+                            font.family: Appearance.fontFamily
+                            font.pixelSize: Appearance.fontSizeSmall
+                            color: Colors.muted
+                        }
+                    }
+
+                    VolumeSlider {
+                        width: parent.width
+                        value: root.inputVolume
+                        enabled: !!root.source
+                        onMoved: (v) => { if (root.source && root.source.audio) root.source.audio.volume = v }
+                    }
+
+                    LevelMeter {
+                        width: parent.width
+                        level: inputPeak.peak
+                    }
+
+
+                    Column {
+                        width: parent.width
+                        spacing: 4
+                        Repeater {
+                            model: root.candidateSources
+                            DeviceRow {
+                                required property var modelData
+                                node: modelData
+                                icon: root.sourceIcon(modelData)
+                                active: !!(root.source && modelData && root.source.id === modelData.id)
+                                onActivate: Pipewire.preferredDefaultAudioSource = modelData
+                            }
+                        }
+                    }
+                }
+            }
+        }
+    }
+}

dotfiles/.config/quickshell/modules/bar/VpnIndicator.qml

@@ -0,0 +1,594 @@
+import QtQuick
+import QtQuick.Layouts
+import Quickshell
+import Quickshell.Hyprland
+import Quickshell.Io
+import "../../config"
+
+// A switcher between commercial VPN providers, distinct from
+// TailscaleIndicator.qml — Tailscale is a mesh overlay network you generally
+// leave running; these are traditional single-tunnel VPN clients where only
+// one makes sense to have active at a time. Connecting one here disconnects
+// the other first.
+//
+// V1 scope: connect (provider's own "fastest"/default) and disconnect per
+// provider, live status, no region/server picker yet. Provider CLIs:
+//   - Mullvad: official `mullvad` CLI (mullvad-vpn-daemon package), has
+//     real JSON status output.
+//   - ProtonVPN: official `protonvpn` CLI (proton-vpn-cli package), plain-
+//     text status only — parsed defensively since its exact wording isn't
+//     guaranteed across versions.
+Item {
+    id: root
+    implicitWidth: label.implicitWidth + 4
+    implicitHeight: Appearance.barHeight
+
+    required property var barWindow
+
+    property int refreshIntervalSec: 20
+    readonly property int _refreshIntervalMs: Math.max(5, Math.min(3600, refreshIntervalSec)) * 1000
+
+    // Whether each CLI is on PATH at all. Starts optimistic so the panel
+    // doesn't flash "not installed" before the first `which` check lands.
+    property bool mullvadInstalled: true
+    property bool protonInstalled: true
+
+    // "disconnected" | "connecting" | "connected" | "disconnecting"
+    property string mullvadState: "disconnected"
+    property string mullvadDetail: ""
+    property string protonState: "disconnected"
+    property string protonDetail: ""
+
+    readonly property bool anyConnected: mullvadState === "connected" || protonState === "connected"
+
+    // Set while switching from one provider to the other: holds which one
+    // to connect once the current one has finished disconnecting.
+    property string pendingConnect: ""
+
+    // Surfaced under the header for a failed connect/disconnect; cleared
+    // automatically after a few seconds.
+    property string actionStatus: ""
+
+    function shortLine(text) {
+        const line = String(text || "").trim().split("\n")[0] || ""
+        return line.length > 80 ? line.substring(0, 77) + "…" : line
+    }
+
+    function applyMullvadStatus(text) {
+        try {
+            const data = JSON.parse(text)
+            const state = String(data.state || "disconnected")
+            const loc = data.details && data.details.location
+            root.mullvadState = state
+            root.mullvadDetail = loc ? [loc.city, loc.country].filter(Boolean).join(", ") : ""
+        } catch (e) {
+            root.mullvadState = "disconnected"
+            root.mullvadDetail = ""
+        }
+        VpnExclusivity.mullvadConnected = root.mullvadState === "connected"
+    }
+
+    // No --json here — ProtonVPN's CLI only prints plain text, so this
+    // just looks for a "Status: …" line and, best-effort, a following
+    // "Server:"/"Country:" line if the CLI happens to print one.
+    function applyProtonStatus(text) {
+        const body = String(text || "")
+        const statusMatch = body.match(/^Status:\s*(.+)$/mi)
+        const raw = statusMatch ? statusMatch[1].trim().toLowerCase() : ""
+        root.protonState = raw.indexOf("connected") === 0 ? "connected" : "disconnected"
+        const serverMatch = body.match(/^Server:\s*(.+)$/mi)
+        const countryMatch = body.match(/^Country:\s*(.+)$/mi)
+        root.protonDetail = serverMatch ? serverMatch[1].trim() : (countryMatch ? countryMatch[1].trim() : "")
+        VpnExclusivity.protonConnected = root.protonState === "connected"
+    }
+
+    function refreshMullvad() {
+        if (!root.mullvadInstalled) {
+            if (!mullvadWhichProc.running) mullvadWhichProc.running = true
+            return
+        }
+        if (!mullvadStatusProc.running) {
+            mullvadStatusProc.running = true
+            mullvadPollWatchdog.restart()
+        }
+    }
+
+    function refreshProton() {
+        if (!root.protonInstalled) {
+            if (!protonWhichProc.running) protonWhichProc.running = true
+            return
+        }
+        if (!protonStatusProc.running) {
+            protonStatusProc.running = true
+            protonPollWatchdog.restart()
+        }
+    }
+
+    function refresh() {
+        root.refreshMullvad()
+        root.refreshProton()
+    }
+
+    function connectMullvad() {
+        if (mullvadConnectProc.running || mullvadDisconnectProc.running) return
+        if (root.protonState !== "disconnected") {
+            root.pendingConnect = "mullvad"
+            root.disconnectProton()
+            return
+        }
+        root.pendingConnect = ""
+        mullvadConnectProc.running = true
+    }
+
+    function connectProton() {
+        if (protonConnectProc.running || protonDisconnectProc.running) return
+        if (root.mullvadState !== "disconnected") {
+            root.pendingConnect = "protonvpn"
+            root.disconnectMullvad()
+            return
+        }
+        root.pendingConnect = ""
+        protonConnectProc.running = true
+    }
+
+    function disconnectMullvad() {
+        if (mullvadDisconnectProc.running) return
+        mullvadDisconnectProc.running = true
+    }
+
+    function disconnectProton() {
+        if (protonDisconnectProc.running) return
+        protonDisconnectProc.running = true
+    }
+
+    function toggleMullvad() {
+        if (mullvadConnectProc.running || mullvadDisconnectProc.running) return
+        if (root.mullvadState === "connected") root.disconnectMullvad()
+        else root.connectMullvad()
+    }
+
+    function toggleProton() {
+        if (protonConnectProc.running || protonDisconnectProc.running) return
+        if (root.protonState === "connected") root.disconnectProton()
+        else root.connectProton()
+    }
+
+    // Tailscale fights Mullvad/ProtonVPN for the default route/DNS, so fire
+    // this right after either one finishes connecting — a harmless no-op
+    // if Tailscale was already down. TailscaleIndicator.qml also backs
+    // itself off reactively (via VpnExclusivity) as a backstop, but doing
+    // it here too avoids waiting out its poll interval.
+    Process {
+        id: tailscaleDownProc
+        command: ["tailscale", "down"]
+        stdout: StdioCollector {}
+        stderr: StdioCollector {}
+    }
+
+    // --- Mullvad ---------------------------------------------------------
+
+    Process {
+        id: mullvadWhichProc
+        command: ["which", "mullvad"]
+        running: true
+        stdout: StdioCollector {}
+        onExited: (exitCode, exitStatus) => {
+            root.mullvadInstalled = exitCode === 0
+            if (root.mullvadInstalled) root.refreshMullvad()
+        }
+    }
+
+    Process {
+        id: mullvadStatusProc
+        command: ["mullvad", "status", "--json"]
+        stdout: StdioCollector {
+            id: mullvadStatusCollector
+            onStreamFinished: root.applyMullvadStatus(mullvadStatusCollector.text)
+        }
+        onExited: (exitCode, exitStatus) => {
+            if (exitCode !== 0 && !mullvadWhichProc.running) mullvadWhichProc.running = true
+        }
+    }
+
+    Process {
+        id: mullvadConnectProc
+        command: ["mullvad", "connect", "--wait"]
+        stdout: StdioCollector {}
+        stderr: StdioCollector { id: mullvadConnectErr }
+        onExited: (exitCode, exitStatus) => {
+            if (exitCode !== 0) {
+                root.actionStatus = "Mullvad: " + root.shortLine(mullvadConnectErr.text || "connect failed")
+                actionStatusTimer.restart()
+            } else if (!tailscaleDownProc.running) {
+                tailscaleDownProc.running = true
+            }
+            root.refreshMullvad()
+        }
+    }
+
+    Process {
+        id: mullvadDisconnectProc
+        command: ["mullvad", "disconnect", "--wait"]
+        stdout: StdioCollector {}
+        stderr: StdioCollector { id: mullvadDisconnectErr }
+        onExited: (exitCode, exitStatus) => {
+            if (exitCode !== 0) {
+                root.actionStatus = "Mullvad: " + root.shortLine(mullvadDisconnectErr.text || "disconnect failed")
+                actionStatusTimer.restart()
+            }
+            root.refreshMullvad()
+            if (root.pendingConnect === "mullvad") { root.pendingConnect = ""; root.connectMullvad() }
+            else if (root.pendingConnect === "protonvpn") { root.pendingConnect = ""; root.connectProton() }
+        }
+    }
+
+    Timer {
+        id: mullvadPollWatchdog
+        interval: 15000
+        repeat: false
+        onTriggered: if (mullvadStatusProc.running) mullvadStatusProc.running = false
+    }
+
+    // --- ProtonVPN ---------------------------------------------------------
+
+    Process {
+        id: protonWhichProc
+        command: ["which", "protonvpn"]
+        running: true
+        stdout: StdioCollector {}
+        onExited: (exitCode, exitStatus) => {
+            root.protonInstalled = exitCode === 0
+            if (root.protonInstalled) root.refreshProton()
+        }
+    }
+
+    Process {
+        id: protonStatusProc
+        command: ["protonvpn", "status"]
+        stdout: StdioCollector {
+            id: protonStatusCollector
+            onStreamFinished: root.applyProtonStatus(protonStatusCollector.text)
+        }
+        onExited: (exitCode, exitStatus) => {
+            if (exitCode !== 0 && !protonWhichProc.running) protonWhichProc.running = true
+        }
+    }
+
+    Process {
+        id: protonConnectProc
+        command: ["protonvpn", "connect"]
+        stdout: StdioCollector {}
+        stderr: StdioCollector { id: protonConnectErr }
+        onExited: (exitCode, exitStatus) => {
+            if (exitCode !== 0) {
+                root.actionStatus = "ProtonVPN: " + root.shortLine(protonConnectErr.text || "connect failed")
+                actionStatusTimer.restart()
+            } else if (!tailscaleDownProc.running) {
+                tailscaleDownProc.running = true
+            }
+            root.refreshProton()
+        }
+    }
+
+    Process {
+        id: protonDisconnectProc
+        command: ["protonvpn", "disconnect"]
+        stdout: StdioCollector {}
+        stderr: StdioCollector { id: protonDisconnectErr }
+        onExited: (exitCode, exitStatus) => {
+            if (exitCode !== 0) {
+                root.actionStatus = "ProtonVPN: " + root.shortLine(protonDisconnectErr.text || "disconnect failed")
+                actionStatusTimer.restart()
+            }
+            root.refreshProton()
+            if (root.pendingConnect === "mullvad") { root.pendingConnect = ""; root.connectMullvad() }
+            else if (root.pendingConnect === "protonvpn") { root.pendingConnect = ""; root.connectProton() }
+        }
+    }
+
+    Timer {
+        id: protonPollWatchdog
+        interval: 15000
+        repeat: false
+        onTriggered: if (protonStatusProc.running) protonStatusProc.running = false
+    }
+
+    // --- Shared timers -----------------------------------------------------
+
+    Timer {
+        id: refreshTimer
+        interval: root._refreshIntervalMs
+        repeat: true
+        running: true
+        triggeredOnStart: true
+        onTriggered: root.refresh()
+    }
+
+    Timer {
+        id: actionStatusTimer
+        interval: 4000
+        repeat: false
+        onTriggered: root.actionStatus = ""
+    }
+
+    // --- Bar icon ------------------------------------------------------------
+
+    // A fixed, wallpaper-independent green rather than Colors.primary — the
+    // glyph itself doesn't change shape between states (unlike Tailscale's
+    // crossed-out logo), so "connected" needs to read as a shape cue (a
+    // badge appearing) rather than rely on a color swap that can end up
+    // low-contrast depending on the current pywal palette.
+    readonly property color connectedBadgeColor: "#3ddc84"
+
+    Text {
+        id: label
+        anchors.centerIn: parent
+        font.family: Appearance.iconFontFamilyRounded
+        font.variableAxes: Appearance.iconFontAxes
+        font.pixelSize: Appearance.iconSize
+        color: root.anyConnected ? Colors.primary : Colors.muted
+        text: "vpn_lock"
+    }
+
+    // Small solid dot badge, bottom-right of the glyph, shown only while a
+    // tunnel is actually up — a shape appearing/disappearing reads at a
+    // glance even when the icon tint alone wouldn't stand out.
+    Rectangle {
+        visible: root.anyConnected
+        width: 6
+        height: 6
+        radius: 3
+        color: root.connectedBadgeColor
+        border.color: Colors.background
+        border.width: 1
+        anchors.right: label.right
+        anchors.bottom: label.bottom
+        anchors.rightMargin: 0
+        anchors.bottomMargin: 1
+    }
+
+    MouseArea {
+        anchors.fill: parent
+        cursorShape: Qt.PointingHandCursor
+        onClicked: {
+            panel.visible = !panel.visible
+            grab.active = panel.visible
+        }
+    }
+
+    // --- Reusable pieces -----------------------------------------------------
+
+    component ToggleSwitch: Item {
+        id: toggleRoot
+        property bool checked: false
+        property bool busy: false
+        signal toggled()
+        implicitWidth: 34
+        implicitHeight: 18
+        opacity: toggleRoot.enabled ? 1 : 0.4
+
+        Rectangle {
+            anchors.fill: parent
+            radius: 0
+            color: toggleRoot.checked ? Colors.primary : Colors.muted
+            opacity: (toggleRoot.checked ? 1 : 0.35) * (toggleRoot.busy ? 0.6 : 1)
+        }
+        // Hover-only outline, offset outside the switch itself rather than
+        // drawn on its edge — the switch lags behind a click until the
+        // connect/disconnect process actually finishes, so this is just a
+        // "you can click this" cue, not click feedback. toggleMouse.containsMouse
+        // is already false while busy, since a disabled MouseArea doesn't
+        // track hover.
+        Rectangle {
+            anchors.fill: parent
+            anchors.margins: -4
+            radius: 0
+            color: "transparent"
+            border.color: Colors.foreground
+            border.width: toggleMouse.containsMouse ? 1 : 0
+        }
+        Rectangle {
+            width: parent.height - 4
+            height: parent.height - 4
+            radius: 0
+            color: Colors.background
+            anchors.verticalCenter: parent.verticalCenter
+            x: toggleRoot.checked ? parent.width - width - 2 : 2
+            Behavior on x { NumberAnimation { duration: Appearance.animationDuration } }
+        }
+        MouseArea {
+            id: toggleMouse
+            anchors.fill: parent
+            enabled: !toggleRoot.busy
+            hoverEnabled: true
+            cursorShape: toggleRoot.busy ? Qt.ArrowCursor : Qt.PointingHandCursor
+            onClicked: toggleRoot.toggled()
+        }
+    }
+
+    // A single provider's row — icon, name, live status line, and a toggle
+    // that connects/disconnects it (routed back through root so it can
+    // enforce the one-provider-at-a-time rule).
+    component ProviderRow: Rectangle {
+        id: provRow
+        property string label: ""
+        property string subIcon: "shield"
+        property string detailText: ""
+        property string state: "disconnected"
+        property bool installed: true
+        signal toggle()
+        width: parent ? parent.width : 0
+        radius: 0
+        implicitHeight: rowContent.implicitHeight + 12
+        color: provRow.state === "connected"
+            ? Qt.rgba(Colors.primary.r, Colors.primary.g, Colors.primary.b, 0.18)
+            : "transparent"
+
+        RowLayout {
+            id: rowContent
+            anchors.left: parent.left
+            anchors.right: parent.right
+            anchors.verticalCenter: parent.verticalCenter
+            anchors.margins: 6
+            spacing: 8
+
+            Text {
+                Layout.preferredWidth: 20
+                Layout.minimumWidth: 20
+                Layout.maximumWidth: 20
+                horizontalAlignment: Text.AlignHCenter
+                text: provRow.subIcon
+                font.family: Appearance.iconFontFamilyRounded
+                font.variableAxes: Appearance.iconFontAxes
+                font.pixelSize: 14
+                color: provRow.state === "connected" ? Colors.primary : Colors.foreground
+            }
+
+            ColumnLayout {
+                Layout.fillWidth: true
+                spacing: 1
+
+                Text {
+                    Layout.fillWidth: true
+                    text: provRow.label
+                    elide: Text.ElideRight
+                    font.family: Appearance.fontFamily
+                    font.pixelSize: Appearance.fontSize
+                    font.bold: provRow.state === "connected"
+                    color: Colors.foreground
+                }
+                Text {
+                    Layout.fillWidth: true
+                    text: !provRow.installed ? "Not installed"
+                        : provRow.state === "connecting" ? "Connecting…"
+                        : provRow.state === "disconnecting" ? "Disconnecting…"
+                        : provRow.state === "connected" ? (provRow.detailText || "Connected")
+                        : "Disconnected"
+                    elide: Text.ElideRight
+                    font.family: Appearance.fontFamily
+                    font.pixelSize: Appearance.fontSizeSmall
+                    color: Colors.muted
+                }
+            }
+
+            ToggleSwitch {
+                enabled: provRow.installed
+                checked: provRow.state === "connected" || provRow.state === "connecting"
+                busy: provRow.state === "connecting" || provRow.state === "disconnecting"
+                onToggled: provRow.toggle()
+            }
+        }
+    }
+
+    // --- Panel -----------------------------------------------------------
+
+    PopupWindow {
+        id: panel
+        visible: false
+        color: "transparent"
+        readonly property int contentWidth: 244
+        readonly property int contentPadding: 16
+        implicitWidth: contentWidth + contentPadding * 2
+        implicitHeight: mainColumn.implicitHeight + contentPadding * 2
+        Behavior on implicitHeight {
+            NumberAnimation { duration: Appearance.animationDuration; easing.type: Easing.OutCubic }
+        }
+
+        onVisibleChanged: if (visible) root.refresh()
+
+        anchor {
+            window: root.barWindow
+            rect.x: 0
+            rect.y: 0
+            rect.width: root.barWindow.width
+            rect.height: root.barWindow.height
+            edges: Edges.Bottom | Edges.Right
+            gravity: Edges.Bottom | Edges.Left
+            margins.bottom: -4
+            margins.right: 0
+        }
+
+        HyprlandFocusGrab {
+            id: grab
+            windows: [panel]
+            onCleared: panel.visible = false
+        }
+
+        Rectangle {
+            anchors.fill: parent
+            radius: 0
+            color: Colors.surface
+            border.color: Colors.muted
+            border.width: 3
+
+            Column {
+                id: mainColumn
+                anchors.fill: parent
+                anchors.margins: panel.contentPadding
+                spacing: 10
+
+                RowLayout {
+                    width: parent.width
+                    spacing: 8
+
+                    Text {
+                        text: "vpn_lock"
+                        font.family: Appearance.iconFontFamilyRounded
+                        font.variableAxes: Appearance.iconFontAxes
+                        font.pixelSize: 22
+                        color: root.anyConnected ? Colors.primary : Colors.foreground
+                    }
+                    Text {
+                        Layout.fillWidth: true
+                        text: "VPN"
+                        font.family: Appearance.fontFamily
+                        font.pixelSize: 18
+                        font.bold: true
+                        color: Colors.foreground
+                    }
+                }
+
+                Text {
+                    visible: root.actionStatus !== ""
+                    width: parent.width
+                    text: root.actionStatus
+                    font.family: Appearance.fontFamily
+                    font.pixelSize: Appearance.fontSizeSmall
+                    color: Colors.muted
+                    wrapMode: Text.WordWrap
+                }
+
+                Column {
+                    width: parent.width
+                    spacing: 2
+
+                    ProviderRow {
+                        label: "Mullvad"
+                        subIcon: "gpp_good"
+                        state: root.mullvadState
+                        detailText: root.mullvadDetail
+                        installed: root.mullvadInstalled
+                        onToggle: root.toggleMullvad()
+                    }
+                    ProviderRow {
+                        label: "ProtonVPN"
+                        subIcon: "gpp_good"
+                        state: root.protonState
+                        detailText: root.protonDetail
+                        installed: root.protonInstalled
+                        onToggle: root.toggleProton()
+                    }
+                }
+
+                Text {
+                    width: parent.width
+                    text: "Connecting one disconnects the other — only one VPN tunnel at a time."
+                    font.family: Appearance.fontFamily
+                    font.pixelSize: Appearance.fontSizeSmall
+                    color: Colors.muted
+                    wrapMode: Text.WordWrap
+                }
+            }
+        }
+    }
+}

dotfiles/.config/quickshell/modules/bar/Workspaces.qml

@@ -0,0 +1,44 @@
+import QtQuick
+import QtQuick.Layouts
+import Quickshell.Hyprland
+import "../../config"
+
+RowLayout {
+    id: root
+    property var screen
+
+    spacing: 4
+
+    Repeater {
+        model: Hyprland.workspaces
+
+        delegate: Rectangle {
+            id: pill
+            required property var modelData
+            visible: modelData.monitor && root.screen && modelData.monitor.name === root.screen.name
+
+            implicitWidth: 26
+            implicitHeight: 22
+            radius: Appearance.radiusSmall
+            color: modelData.urgent ? Colors.urgent
+                : modelData.active ? Colors.primary
+                : "transparent"
+
+            Behavior on color { ColorAnimation { duration: Appearance.animationDuration } }
+
+            Text {
+                anchors.centerIn: parent
+                text: modelData.name
+                font.family: Appearance.fontFamily
+                font.pixelSize: Appearance.fontSizeSmall
+                color: modelData.active ? Colors.primaryText : Colors.foreground
+            }
+
+            MouseArea {
+                anchors.fill: parent
+                cursorShape: Qt.PointingHandCursor
+                onClicked: Hyprland.dispatch("workspace " + modelData.name)
+            }
+        }
+    }
+}

dotfiles/.config/quickshell/modules/osd/VolumeOsd.qml

@@ -0,0 +1,125 @@
+import Quickshell
+import Quickshell.Wayland
+import Quickshell.Services.Pipewire
+import QtQuick
+import QtQuick.Layouts
+import "../../config"
+
+PanelWindow {
+    id: osd
+    visible: false
+    color: "transparent"
+    exclusiveZone: 0
+
+    // Top-right, just under the bar — same fixed distance from the bar and
+    // screen edge (Appearance.spacing) that every popup opened from the bar
+    // itself uses, so this lines up with them instead of floating
+    // bottom-center.
+    anchors { top: true; right: true }
+    margins.top: Appearance.spacing
+    margins.right: Appearance.spacing
+
+    implicitWidth: 272
+    implicitHeight: 54
+
+    WlrLayershell.layer: WlrLayer.Overlay
+    WlrLayershell.namespace: "quickshell:osd"
+
+    readonly property var sink: Pipewire.defaultAudioSink
+    PwObjectTracker { objects: osd.sink ? [osd.sink] : [] }
+
+    Timer {
+        id: hideTimer
+        interval: 1400
+        onTriggered: osd.visible = false
+    }
+
+    Connections {
+        target: osd.sink ? osd.sink.audio : null
+        function onVolumeChanged() { osd.visible = true; hideTimer.restart() }
+        function onMutedChanged() { osd.visible = true; hideTimer.restart() }
+    }
+
+    Rectangle {
+        anchors.fill: parent
+        radius: Appearance.radius
+        color: Colors.surface
+        border.color: Colors.muted
+        border.width: 1
+
+        RowLayout {
+            anchors.fill: parent
+            anchors.margins: 14
+            spacing: 12
+
+            Text {
+                font.family: Appearance.iconFontFamilyRounded
+                font.variableAxes: Appearance.iconFontAxes
+                font.pixelSize: 18
+                color: Colors.foreground
+                text: {
+                    const audio = osd.sink ? osd.sink.audio : null
+                    if (!audio || audio.muted || audio.volume <= 0) return "volume_off"
+                    return audio.volume < 0.5 ? "volume_down" : "volume_up"
+                }
+            }
+
+            Item {
+                id: slider
+                Layout.fillWidth: true
+                implicitHeight: 16
+
+                readonly property real value: osd.sink && osd.sink.audio ? osd.sink.audio.volume : 0
+                readonly property bool enabled: !!osd.sink
+
+                Rectangle {
+                    id: track
+                    anchors.verticalCenter: parent.verticalCenter
+                    width: parent.width
+                    height: 4
+                    radius: 0
+                    color: Colors.muted
+                    opacity: 0.35
+                }
+                Rectangle {
+                    anchors.verticalCenter: parent.verticalCenter
+                    anchors.left: parent.left
+                    width: track.width * Math.max(0, Math.min(1, slider.value))
+                    height: 4
+                    radius: 0
+                    color: Colors.primary
+                    opacity: slider.enabled ? 1 : 0.4
+                }
+                Rectangle {
+                    width: 12
+                    height: 12
+                    radius: 6
+                    color: Colors.primary
+                    opacity: slider.enabled ? 1 : 0.4
+                    anchors.verticalCenter: parent.verticalCenter
+                    x: Math.max(0, Math.min(track.width - width, track.width * slider.value - width / 2))
+                }
+                MouseArea {
+                    anchors.fill: parent
+                    enabled: slider.enabled
+                    cursorShape: Qt.PointingHandCursor
+                    function updateFromX(mx) {
+                        if (!osd.sink || !osd.sink.audio) return
+                        osd.sink.audio.volume = Math.max(0, Math.min(1, mx / track.width))
+                    }
+                    onPressed: (mouse) => updateFromX(mouse.x)
+                    onPositionChanged: (mouse) => { if (pressed) updateFromX(mouse.x) }
+                }
+            }
+
+            Text {
+                Layout.preferredWidth: 32
+                horizontalAlignment: Text.AlignRight
+                font.family: Appearance.fontFamily
+                font.pixelSize: Appearance.fontSizeSmall
+                color: Colors.muted
+                text: Math.round(slider.value * 100) + "%"
+            }
+        }
+    }
+}

dotfiles/.config/quickshell/scripts/CheckQuickshellSetup.sh

@@ -0,0 +1,259 @@
+#!/bin/bash
+# Pre-flight check for everything this quickshell config depends on outside
+# its own QML — fonts, the compositor, backing D-Bus services, and the
+# external CLIs individual bar modules shell out to. Run this after
+# installing/stowing quickshell on a new machine, before assuming the bar
+# is just going to work.
+#
+# Usage: ./CheckQuickshellSetup.sh [path-to-quickshell-config]
+# Defaults to $XDG_CONFIG_HOME/quickshell or ~/.config/quickshell.
+
+set -uo pipefail
+
+QS_DIR="${1:-${XDG_CONFIG_HOME:-$HOME/.config}/quickshell}"
+
+PASS=0
+WARN=0
+FAIL=0
+
+c_green="\033[0;32m"; c_yellow="\033[0;33m"; c_red="\033[0;31m"; c_reset="\033[0m"
+
+pass() { printf "  ${c_green}✓${c_reset} %s\n" "$1"; PASS=$((PASS+1)); }
+warn() { printf "  ${c_yellow}!${c_reset} %s\n" "$1"; WARN=$((WARN+1)); }
+fail() { printf "  ${c_red}✗${c_reset} %s\n" "$1"; FAIL=$((FAIL+1)); }
+section() { printf "\n%s\n" "$1"; }
+
+svc_state() {
+    # active / inactive / missing / no-systemctl. $1 = unit, $2 = --user (optional)
+    # NB: capture-then-here-string, not `cmd | grep -q`. Under `set -o
+    # pipefail`, grep -q exits the instant it finds a match, SIGPIPE-ing a
+    # still-writing producer — that producer's non-zero exit (not grep's
+    # success) becomes the pipeline's status, which reads as "not found"
+    # even when it was. Verified this actually happens with fc-list below.
+    if ! command -v systemctl >/dev/null 2>&1; then echo "no-systemctl"; return; fi
+    local unit_files
+    unit_files=$(systemctl ${2:-} list-unit-files "$1" 2>/dev/null)
+    if grep -q "$1" <<< "$unit_files"; then
+        systemctl ${2:-} is-active "$1" 2>/dev/null || echo "inactive"
+    else
+        echo "missing"
+    fi
+}
+
+# --- 0. Quickshell itself + config files present ----------------------------
+
+section "Quickshell core"
+
+if command -v quickshell >/dev/null 2>&1; then
+    ver=$(quickshell --version 2>&1 | head -1)
+    pass "quickshell found ($(command -v quickshell)) — $ver"
+else
+    fail "quickshell binary not found on PATH — install it before anything else here matters"
+fi
+
+for f in "shell.qml" "config/Appearance.qml" "config/Colors.qml" "config/qmldir"; do
+    if [ -f "$QS_DIR/$f" ]; then
+        pass "found $f"
+    else
+        fail "missing $QS_DIR/$f — dotfiles not fully stowed/symlinked here?"
+    fi
+done
+
+# Nearly every module (ActiveWindow, Workspaces, PowerButton, PanelWindow's
+# layer-shell surfaces, HyprlandFocusGrab) assumes a live Hyprland session.
+if [ -n "${HYPRLAND_INSTANCE_SIGNATURE:-}" ] && command -v hyprctl >/dev/null 2>&1 && hyprctl monitors >/dev/null 2>&1; then
+    pass "Hyprland is the running compositor"
+else
+    fail "Hyprland doesn't appear to be running — Quickshell.Hyprland and the layer-shell bar will not function"
+fi
+
+# --- 1. Fonts -----------------------------------------------------------------
+
+section "Fonts"
+
+if command -v fc-list >/dev/null 2>&1; then
+    # Captured once, then grepped via here-string — see the pipefail/SIGPIPE
+    # note on svc_state() above; fc-list's output is exactly what triggers it.
+    fc_out=$(fc-list)
+
+    if grep -qi "Material Symbols Outlined" <<< "$fc_out"; then
+        pass "Material Symbols Outlined installed"
+    else
+        fail "Material Symbols Outlined not found — install 'ttf-material-symbols-variable' (AUR); every glyph icon in the bar/panels will render as fallback text without it"
+    fi
+
+    if grep -qi "CaskaydiaCove Nerd Font Mono" <<< "$fc_out"; then
+        pass "CaskaydiaCove Nerd Font Mono installed"
+    else
+        fail "CaskaydiaCove Nerd Font Mono not found — install a Cascadia Code Nerd Font package; clock/labels/window title use it"
+    fi
+else
+    warn "fc-list not found (fontconfig missing?) — can't verify fonts"
+fi
+
+# --- 2. Backing services for native Quickshell modules ----------------------
+# These modules talk to system services directly over D-Bus rather than
+# shelling out — the service being up is the actual dependency, not a CLI.
+
+section "Backing services (native QML modules)"
+
+st=$(svc_state NetworkManager.service)
+case "$st" in
+    active) pass "NetworkManager.service active — Quickshell.Networking (NetworkIndicator)" ;;
+    missing) fail "NetworkManager not installed — required by NetworkIndicator.qml" ;;
+    *) fail "NetworkManager.service is $st — run: sudo systemctl enable --now NetworkManager" ;;
+esac
+
+st=$(svc_state bluetooth.service)
+case "$st" in
+    active) pass "bluetooth.service active — Quickshell.Bluetooth (BluetoothIndicator)" ;;
+    missing) fail "bluez not installed — required by BluetoothIndicator.qml" ;;
+    *) fail "bluetooth.service is $st — run: sudo systemctl enable --now bluetooth" ;;
+esac
+
+# Pipewire/wireplumber are user-session services, not system ones.
+st=$(svc_state pipewire.service --user)
+case "$st" in
+    active) pass "pipewire.service (user) active — Quickshell.Services.Pipewire (Volume/VolumeOsd)" ;;
+    missing) fail "pipewire not installed — required by Volume.qml/VolumeOsd.qml" ;;
+    *) fail "pipewire.service (user) is $st — run: systemctl --user enable --now pipewire pipewire-pulse wireplumber" ;;
+esac
+
+st=$(svc_state wireplumber.service --user)
+case "$st" in
+    active) pass "wireplumber.service (user) active" ;;
+    missing) warn "wireplumber not installed — pipewire falls back to pipewire-media-session if present, otherwise volume control may misbehave" ;;
+    *) fail "wireplumber.service (user) is $st — run: systemctl --user enable --now wireplumber" ;;
+esac
+
+# --- 3. External CLIs shelled out to via Process ----------------------------
+
+section "External CLIs (Quickshell.Io Process calls)"
+
+check_bin() {
+    # $1 = binary, $2 = which module(s) use it, $3 = fail|warn on missing
+    if command -v "$1" >/dev/null 2>&1; then
+        pass "$1 found — used by $2"
+    elif [ "$3" = "warn" ]; then
+        warn "$1 not found — used by $2 (optional on this machine)"
+    else
+        fail "$1 not found — used by $2"
+    fi
+}
+
+check_bin nmcli   "NetworkIndicator.qml (DNS provider panel, connection queries)" fail
+check_bin ip      "NetworkIndicator.qml (gateway/IP lookups)" fail
+check_bin ping    "NetworkIndicator.qml (latency/packet-loss stat)" fail
+check_bin cat     "NetworkIndicator.qml (/sys/class/net throughput counters)" fail
+check_bin systemctl "PowerButton.qml (suspend/hibernate/reboot/poweroff)" fail
+check_bin tailscale  "TailscaleIndicator.qml / VpnExclusivity" warn
+check_bin mullvad    "VpnIndicator.qml / VpnExclusivity" warn
+check_bin protonvpn  "VpnIndicator.qml / VpnExclusivity" warn
+
+have_tailscale=0; have_mullvad=0; have_proton=0
+command -v tailscale >/dev/null 2>&1 && have_tailscale=1
+command -v mullvad   >/dev/null 2>&1 && have_mullvad=1
+command -v protonvpn >/dev/null 2>&1 && have_proton=1
+
+if [ $have_mullvad -eq 0 ] && [ $have_proton -eq 0 ]; then
+    warn "neither Mullvad nor ProtonVPN CLI is installed — VpnIndicator.qml will show both as 'Not installed'"
+fi
+
+# --- 4. VPN daemons + functional status (Mullvad/ProtonVPN/Tailscale) -------
+# The exclusivity logic (VpnExclusivity.qml backing off Tailscale when a
+# commercial VPN connects) is pure QML and ships with the dotfiles — it
+# needs no setup of its own. What varies per machine is whether these three
+# are actually installed, enabled, and callable without a password prompt.
+
+section "VPN dual-setup (Mullvad/ProtonVPN + Tailscale)"
+
+if [ $have_tailscale -eq 1 ]; then
+    st=$(svc_state tailscaled.service)
+    case "$st" in
+        active) pass "tailscaled.service is active" ;;
+        missing) fail "tailscaled.service not found — reinstall tailscale" ;;
+        *) fail "tailscaled.service is $st — run: sudo systemctl enable --now tailscaled" ;;
+    esac
+
+    if out=$(timeout 5 tailscale status --json 2>&1); then
+        if python3 -c "import json,sys; json.load(sys.stdin)" >/dev/null 2>&1 <<< "$out"; then
+            pass "tailscale status --json returns valid JSON"
+        else
+            warn "tailscale status --json returned non-JSON output"
+        fi
+    else
+        fail "tailscale status --json failed: $(echo "$out" | head -1)"
+    fi
+fi
+
+if [ $have_mullvad -eq 1 ]; then
+    st=$(svc_state mullvad-daemon.service)
+    case "$st" in
+        active) pass "mullvad-daemon.service is active" ;;
+        missing) fail "mullvad-daemon.service not found — reinstall the Mullvad package" ;;
+        *) fail "mullvad-daemon.service is $st — run: sudo systemctl enable --now mullvad-daemon" ;;
+    esac
+
+    if out=$(timeout 5 mullvad status --json 2>&1); then
+        if python3 -c "import json,sys; json.load(sys.stdin)" >/dev/null 2>&1 <<< "$out"; then
+            pass "mullvad status --json returns valid JSON"
+        else
+            warn "mullvad status --json returned non-JSON output"
+        fi
+    else
+        fail "mullvad status --json failed: $(echo "$out" | head -1)"
+    fi
+fi
+
+if [ $have_proton -eq 1 ]; then
+    # ProtonVPN's CLI drives connections through NetworkManager rather than
+    # its own daemon — already checked above, just re-verified here in context.
+    if out=$(timeout 5 protonvpn status 2>&1); then
+        if grep -qi "^Status:" <<< "$out"; then
+            pass "protonvpn status returns a parseable 'Status:' line"
+        else
+            warn "protonvpn status has no 'Status:' line — applyProtonStatus() in VpnIndicator.qml may misread it: $(echo "$out" | head -1)"
+        fi
+    else
+        fail "protonvpn status failed: $(echo "$out" | head -1)"
+    fi
+fi
+
+ts_up=0; mv_up=0; pv_up=0
+# Same capture-then-here-string reasoning as above — these outputs are small
+# enough that the SIGPIPE race is unlikely, but there's no upside to relying
+# on that instead of just being consistent.
+[ $have_tailscale -eq 1 ] && grep -q '"BackendState":"Running"' <<< "$(tailscale status --json 2>/dev/null)" && ts_up=1
+[ $have_mullvad -eq 1 ] && grep -qi "^Connected" <<< "$(mullvad status 2>/dev/null)" && mv_up=1
+[ $have_proton -eq 1 ] && grep -qi "^Status:\s*Connected" <<< "$(protonvpn status 2>/dev/null)" && pv_up=1
+
+active_count=$((ts_up + mv_up + pv_up))
+if [ $active_count -le 1 ]; then
+    pass "at most one tunnel active right now (tailscale=$ts_up mullvad=$mv_up protonvpn=$pv_up)"
+else
+    warn "more than one tunnel is up right now (tailscale=$ts_up mullvad=$mv_up protonvpn=$pv_up) — bring extras down manually; quickshell only enforces exclusivity when you toggle from its own UI"
+fi
+
+# --- 5. System tray (currently disabled in Bar.qml) -------------------------
+
+section "System tray (Tray.qml)"
+
+if grep -q "^\s*//\s*Tray\s*{}" "$QS_DIR/modules/bar/Bar.qml" 2>/dev/null; then
+    warn "Tray {} is commented out in Bar.qml — skipping icon-theme check (nothing to render)"
+elif [ -f "$QS_DIR/modules/bar/Bar.qml" ]; then
+    if command -v gtk-update-icon-cache >/dev/null 2>&1 || [ -d /usr/share/icons/hicolor ]; then
+        pass "an icon theme (at least hicolor) is present for Quickshell.Services.SystemTray icon lookups"
+    else
+        warn "no icon theme found — tray icons may render blank"
+    fi
+fi
+
+# --- Summary -----------------------------------------------------------------
+
+section "Summary"
+printf "  ${c_green}%d passed${c_reset}, ${c_yellow}%d warnings${c_reset}, ${c_red}%d failed${c_reset}\n" "$PASS" "$WARN" "$FAIL"
+
+if [ $FAIL -gt 0 ]; then
+    exit 1
+fi
+exit 0

dotfiles/.config/quickshell/shell.qml

@@ -0,0 +1,16 @@
+import Quickshell
+import "./modules/bar"
+import "./modules/osd"
+
+ShellRoot {
+    Variants {
+        model: Quickshell.screens
+
+        Bar {
+            required property var modelData
+            screen: modelData
+        }
+    }
+
+    VolumeOsd {}
+}

dotfiles/.config/waybar/config

@@ -1,15 +1,15 @@
 {
     "modules-left": ["custom/notification", "battery", "clock#date", "clock","custom/updater", "custom/launcher"],
     "modules-center": ["hyprland/workspaces"],
-    "modules-right": ["network", "bluetooth", "pulseaudio", "custom/power"],
+    "modules-right": ["network", "bluetooth", "wireplumber", "wireplumber#microphone", "custom/power"],
 
     "sway/mode": {
         "format": "<span style=\"italic\">{}</span>"
     },
     "network": {
-        "format-wifi": "<span color='#962fb5'>{icon}   </span>{essid} ({signalStrength}%)",
-        "format-ethernet": "<span color='#962fb5'>   </span>Ethernet",
-        "format-disconnected": "󰅛  Not Connected",
+        "format-wifi": "<span color='#962fb5'>{icon}<span letter_spacing='500'> </span></span>{essid}({signalStrength}%)",
+        "format-ethernet": "<span color='#962fb5'font='bold'>{icon}<span letter_spacing='500'> </span></span><span rise='1000'>Ethernet</span>",
+        "format-disconnected": "󰅛<span letter_spacing='500'> </span><span rise='1000'>Not Connected</span>",
         "tooltip-format": "{ipaddr} via {gwaddr}",
         "tooltip-format-disconnected": "Disconnected",
         "max-length": 50,
@@ -17,7 +17,7 @@
         "on-click-right": "kitty -e nmtui",
         "format-icons": {
             "wifi": ["󰤯", "󰤟", "󰤢", "󰤥", "󰤨"],
-            "ethernet": "",
+            "ethernet": "󰈀",
             "disconnected": "󰅛"
         }
     },
@@ -33,10 +33,10 @@
         "spacing": 10
     },
     "clock": {
-		"format": "  {:%H:%M}"
+		"format": " <span rise='300'>{:%H:%M}</span>"
     },
     "clock#date": {
-		"format": "  {:%A, %B %d, %Y}",
+		"format": " <span rise='300'>{:%A, %B %d, %Y}</span>",
         "tooltip-format": "<tt><small>{calendar}</small></tt>",
         "calendar": {
             "mode"          : "year",
@@ -55,27 +55,30 @@
             "on-click-right": "mode"
             }
     },
-    "pulseaudio": {
-        "format": "{icon}  {volume}%   {format_source}",
-        "format-muted": " {format_source}",
-        "format-bluetooth": "{icon}  {volume}%   {format_source}",
-        "format-bluetooth-muted": " {format_source}",
-        "format-source": " {volume}%",
-        "format-source-muted": "  {volume}%",
-        "format-icons": {
-            "default": [
-                "<span color='#808080'></span>",
-                "<span color='#ffff66'></span>",
-                "<span color='#00ff7f'> </span>"]
-        },
-        "on-click": "pavucontrol"
+    "wireplumber": {
+        "format": "<span rise='300'>{icon}</span>{volume}%",
+        "format-muted": "",
+        "format-bluetooth": "{icon}{volume}%",
+        "format-bluetooth-muted": "",
+        "format-icons": [
+            "<span color='#808080'><span letter_spacing='500'> </span></span>",
+            "<span color='#ffff66'><span letter_spacing='500'> </span></span>",
+            "<span color='#00ff7f'><span letter_spacing='3000'> </span></span>"
+        ],
+        "on-click": "pwvucontrol"
+    },
+    "wireplumber#microphone": {
+        "node-type": "Audio/Source",
+        "format": "<span letter_spacing='100'> </span><span rise='300'>{volume}%</span>",
+        "format-muted": "<span letter_spacing='2000'> </span>{volume}%",
+        "on-click": "pwvucontrol"
     },
     "bluetooth": {
-        "format-on": "<span color='#00ff7f'></span> On",
+        "format-on": "<span color='#00ff7f'><span letter_spacing='500'> </span></span>On",
         "format-off": "<span color='#888888'>󰂲 Off</span>",
         "format-disabled": "<span color='#888888'>󰂲 Off</span>",
-        "format-connected": "<span color='#0478d6'>󰂱</span>  {device_alias}",
-        "format-connected-battery": "<span color='#0478d6'>󰂱 </span> {device_alias}  <span color='#0478d6'>󰥈 </span> {device_battery_percentage}%",
+        "format-connected": "<span color='#0478d6'>󰂱<span letter_spacing='500'> </span></span>{device_alias}",
+        "format-connected-battery": "<span color='#0478d6'>󰂱<span letter_spacing='500'> </span></span>{device_alias}<span letter_spacing='500'> </span><span color='#0478d6'>󰥈<span letter_spacing='500'> </span></span>{device_battery_percentage}%",
         "tooltip-format": "{controller_alias}\t{controller_address}\n\n{num_connections} connected",
         "tooltip-format-connected": "{controller_alias}\t{controller_address}\n\n{num_connections} connected\n\n{device_enumerate}",
         "tooltip-format-enumerate-connected": "{device_alias}\t{device_address}",
@@ -97,7 +100,7 @@
         "on-click-right": "swaymsg 'move scratchpad'"
     },
     "custom/launcher": {
-        "format":"    ",
+        "format":"  ",
         "tooltip-format": "Click To Launch Bitwarden",
         "on-click": "exec bitwarden-desktop"
     },
@@ -106,11 +109,11 @@
                 "warning": 30,
                 "critical": 15
         },
-        "format": "{icon} {capacity}%",
-        "format-charging": "{icon}  {capacity}%",
-        "format-plugged": "{icon}  {capacity}%",
-        "format-alt": "{time} {icon}",
-        "format-full": "󰁹 {capacity}%",
+        "format": "{icon}<span letter_spacing='1'> </span>{capacity}%",
+        "format-charging": "{icon}<span letter_spacing='1'> </span>{capacity}%",
+        "format-plugged": "{icon}<span letter_spacing='1'> </span>{capacity}%",
+        "format-alt": "{time}<span letter_spacing='1'> </span>{icon}",
+        "format-full": "󰁹<span letter_spacing='1'> </span>{capacity}%",
         "format-icons": {
             "default": ["󰁺", "󰁻", "󰁼", "󰁽", "󰁾", "󰁿", "󰂀", "󰂁", "󰂂"],
             "charging": ["󰢜", "󰂆", "󰂇", "󰂈", "󰢝", "󰂉", "󰢞", "󰂊", "󰂋"],
@@ -137,13 +140,13 @@
         "sort-by-number": true
     },
     "custom/updater": {
-        "format": "󰏖  {}",
+        "format": "󰏖 <span rise='300'>{}</span>",
         "exec": "checkupdates | wc -l",
         "exec-if": "[[ $(checkupdates | wc -l) ]]",
-        "interval": 5,
+        "interval": 1300,
         "on-click": "$HOME/.config/waybar/scripts/update-distro.sh",
         "tooltip": true,
-        "tooltip-format": "Left Click: Update System\nArch (w/ notification)\nFedora, OpenSuse, Debian/Ubuntu click to update"
+        "tooltip-format": "Left Click: Update System\nRight Click: Update Package Count\nArch (w/ notification)"
     },
 
     "custom/notification": {

dotfiles/.config/waybar/style.css

@@ -3,6 +3,9 @@
     font-family:
         Font Awesome,
         Roboto,
+        "NotoSansM Nerd Font",
+        "NotoSansMono Nerd Font",
+        "Font Awesome 6 Free",
         Arial,
         sans-serif;
     font-size: 13px;
@@ -16,10 +19,11 @@ window#waybar {
 /*-----module groups----*/
 .modules-right {
     margin: 2px 10px 0 0;
+    padding-top: 1px;
 }
 
 #custom-notification {
-    font-family: "NotoSansMono Nerd Font";
+    font-family: "NotoSansM Nerd Font", "NotoSansMono Nerd Font";
     font-size: 13px;
     background-color: rgba(0, 43, 51, 0.85);
     border-radius: 20px;
@@ -37,6 +41,7 @@ window#waybar {
 
 .modules-left {
     margin: 2px 0 0 5px;
+    padding-top: 1px;
 }
 /*-----modules indv----*/
 #workspaces button {
@@ -68,7 +73,8 @@ window#waybar {
     border-radius: 20px;
     margin: 5px 3px;
 }
-#pulseaudio {
+#wireplumber,
+#wireplumber-microphone {
     padding: 5px 10px 5px 15px;
     background-color: rgba(0, 43, 51, 0.85);
     border-radius: 20px;
@@ -118,7 +124,8 @@ window#waybar {
 #idle_inhibitor.activated {
     color: #2dcc36;
 }
-#pulseaudio.muted {
+#wireplumber.muted,
+#wireplumber-microphone.muted {
     color: #cc3436;
 }
 #battery.charging {

dotfiles/.zshrc

@@ -25,6 +25,9 @@ source $ZSH/oh-my-zsh.sh
 
 alias cl='clear'
 alias zed='zeditor'
+alias ssh-gavin='ssh thoams@192.168.1.83'
+alias ssh-raspberry-pi='ssh thoams@192.168.1.86'
+alias ssh-ted='ssh thoams@192.168.1.87'
 
 # Set-up FZF key bindings (CTRL R for fuzzy history finder)
 source <(fzf --zsh)
@@ -43,6 +46,8 @@ export LC_ALL=C.UTF-8
 
 export SSH_AUTH_SOCK=$HOME/.bitwarden-ssh-agent.sock
 
+export ZED_ALLOW_EMULATED_GPU=1
+
 fastfetch
 
 eval "$(oh-my-posh init zsh --config $HOME/.config/ohmyposh/zen.toml)"