Fix: Drop plain Ctrl+V paste binding in foot

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

README.md

@@ -39,13 +39,26 @@ mkdir Projects
 git clone ssh://git@gitea.thomasleewilliams.co.uk:2222/thomas/dotfiles.git
 ```
 
-Once that is complete, run this command:
+On a fresh install, run the bootstrap script. It installs drivers (auto-detected),
+every package in `system/packages.txt`, yay, flatpaks, then links the dotfiles and
+system config below:
+```console
+~/Projects/dotfiles/bootstrap.sh            # asks about the optional SVT-AV1 + ffmpeg rebuild
+~/Projects/dotfiles/bootstrap.sh --svt-av1  # or --no-svt-av1 to skip the question
+```
+
+To only link the dotfiles, run this command:
 ```console
 stow -d ~/Projects/dotfiles/ -t ~/ dotfiles
 ```
 
 This will sync wallpapers/config files to where they are usually located
 
+System-level config (e.g. pacman options) lives in `system/` and is installed with sudo:
+```console
+~/Projects/dotfiles/system/install.sh
+```
+
 ## 📦 Programs
 
 List of programs and tools I use.

bootstrap.sh

@@ -0,0 +1,168 @@
+#!/usr/bin/env bash
+# Sets up a fresh Arch install: drivers, packages, dotfiles and system config.
+# Safe to re-run; anything already installed is skipped.
+#
+# Usage: ./bootstrap.sh [--svt-av1 | --no-svt-av1]
+#   --svt-av1     also install svt-av1-essential-git and rebuild ffmpeg against it
+#   --no-svt-av1  skip that without asking
+#   (neither)     ask
+set -euo pipefail
+
+repo="$(cd "$(dirname "$0")" && pwd)"
+list="$repo/system/packages.txt"
+
+svt_av1=ask
+for arg in "$@"; do
+    case "$arg" in
+        --svt-av1) svt_av1=yes ;;
+        --no-svt-av1) svt_av1=no ;;
+        *) echo "Unknown option: $arg" >&2; exit 1 ;;
+    esac
+done
+
+if (( EUID == 0 )); then
+    echo "Run this as your normal user, not root (it uses sudo where needed)." >&2
+    exit 1
+fi
+
+step() { printf '\n\033[1;34m==> %s\033[0m\n' "$*"; }
+
+# Prints the packages under a [section] of packages.txt, skipping comments
+packages() {
+    awk -v want="[$1]" '
+        /^\[/ { section = $1; next }
+        section == want { sub(/#.*/, ""); if (NF) print $1 }
+    ' "$list"
+}
+
+# --- System config -----------------------------------------------------------
+
+step "System config (pacman options)"
+"$repo/system/install.sh"
+
+step "Enabling multilib (needed for Steam and 32-bit drivers)"
+if ! grep -q '^\[multilib\]' /etc/pacman.conf; then
+    sudo sed -i '/^#\[multilib\]/,/^#Include/ s/^#//' /etc/pacman.conf
+fi
+sudo pacman -Syu --needed --noconfirm pciutils git base-devel
+
+# --- Hardware ----------------------------------------------------------------
+
+step "Detecting CPU and GPU"
+hw=()
+
+case "$(grep -m1 '^vendor_id' /proc/cpuinfo | awk '{print $3}')" in
+    AuthenticAMD) hw+=(amd-ucode); echo "CPU: AMD" ;;
+    GenuineIntel) hw+=(intel-ucode); echo "CPU: Intel" ;;
+    *) echo "CPU: unknown vendor, skipping microcode" ;;
+esac
+
+# Vendor column of every display controller, e.g. "NVIDIA Corporation"
+gpus="$(lspci -mm | awk -F'"' '$2 ~ /VGA|3D|Display/ { print $4 }')"
+if grep -q NVIDIA <<<"$gpus"; then
+    echo "GPU: NVIDIA"
+    # nvidia-open only ships modules for the stock `linux` kernel; any other
+    # kernel needs the DKMS build. Supports Turing (GTX 16xx / RTX 20xx) and newer.
+    if pacman -Qq linux-lts linux-zen linux-hardened >/dev/null 2>&1; then
+        hw+=(nvidia-open-dkms linux-headers)
+    else
+        hw+=(nvidia-open)
+    fi
+    hw+=(nvidia-utils lib32-nvidia-utils libva-nvidia-driver)
+fi
+if grep -q 'Advanced Micro Devices' <<<"$gpus"; then
+    echo "GPU: AMD"
+    hw+=(mesa lib32-mesa vulkan-radeon lib32-vulkan-radeon)
+fi
+if grep -q 'Intel Corporation' <<<"$gpus"; then
+    echo "GPU: Intel"
+    hw+=(mesa lib32-mesa vulkan-intel lib32-vulkan-intel intel-media-driver)
+fi
+
+# Installed before the main list so Steam's 32-bit Vulkan dependency is
+# already satisfied by the right driver
+if (( ${#hw[@]} )); then
+    sudo pacman -S --needed --noconfirm "${hw[@]}"
+fi
+
+# --- Packages ----------------------------------------------------------------
+
+step "Official repo packages"
+mapfile -t pkgs < <(packages pacman)
+sudo pacman -S --needed --noconfirm "${pkgs[@]}"
+
+step "yay (AUR helper)"
+if ! command -v yay >/dev/null; then
+    build="$(mktemp -d)"
+    git clone https://aur.archlinux.org/yay-bin.git "$build/yay-bin"
+    (cd "$build/yay-bin" && makepkg -si --noconfirm)
+    rm -rf "$build"
+else
+    echo "already installed"
+fi
+
+step "AUR packages"
+mapfile -t pkgs < <(packages aur)
+yay -S --needed --noconfirm "${pkgs[@]}"
+
+step "Flatpak apps"
+sudo flatpak remote-add --if-not-exists flathub https://dl.flathub.org/repo/flathub.flatpakrepo
+mapfile -t pkgs < <(packages flatpak)
+sudo flatpak install -y --noninteractive flathub "${pkgs[@]}"
+
+step "Apps from official install scripts"
+mkdir -p "$HOME/.local/bin"
+for app in $(packages installer); do
+    if command -v "$app" >/dev/null || [[ -x "$HOME/.local/bin/$app" ]]; then
+        echo "$app: already installed"
+        continue
+    fi
+    case "$app" in
+        claude) curl -fsSL https://claude.ai/install.sh | bash ;;
+        oh-my-posh) curl -fsSL https://ohmyposh.dev/install.sh | bash -s -- -d "$HOME/.local/bin" ;;
+        *) echo "$app: no install recipe in bootstrap.sh, skipping" >&2 ;;
+    esac
+done
+
+# --- Optional: SVT-AV1 essential + ffmpeg rebuild ----------------------------
+
+if [[ $svt_av1 == ask ]]; then
+    read -rp $'\nInstall svt-av1-essential-git and rebuild ffmpeg against it? (slow) [y/N] ' reply
+    [[ $reply == [yY]* ]] && svt_av1=yes || svt_av1=no
+fi
+if [[ $svt_av1 == yes ]]; then
+    step "svt-av1-essential-git"
+    # Interactive on purpose: pacman asks to replace the conflicting svt-av1,
+    # and --noconfirm would answer no
+    yay -S --needed svt-av1-essential-git
+    step "Rebuilding ffmpeg against svt-av1-essential-git"
+    "$repo/system/rebuild-ffmpeg.sh"
+fi
+
+# --- Services ----------------------------------------------------------------
+
+step "Enabling services"
+# Not started now: sddm would take over the screen mid-script. They come up on reboot.
+mapfile -t units < <(packages services)
+sudo systemctl enable "${units[@]}"
+
+# --- Dotfiles ----------------------------------------------------------------
+
+step "Linking dotfiles with stow"
+# Create real parent dirs first, otherwise stow symlinks the whole directory
+# (e.g. ~/.config) into the repo and every app's files end up in git
+mkdir -p "$HOME/.config" "$HOME/.local/bin" "$HOME/.local/share" "$HOME/Pictures"
+# Sunshine keeps credentials and logs beside its config; those must stay out of git
+mkdir -p "$HOME/.config/sunshine"
+mkdir -p -m 700 "$HOME/.ssh"
+if ! stow -d "$repo" -t "$HOME" --restow dotfiles; then
+    echo "stow hit conflicts (listed above). Move those files aside, then run:" >&2
+    echo "  stow -d \"$repo\" -t \"\$HOME\" dotfiles" >&2
+fi
+
+if [[ "$(getent passwd "$USER" | cut -d: -f7)" != */zsh ]]; then
+    step "Setting zsh as login shell"
+    chsh -s /usr/bin/zsh
+fi
+
+step "Done — reboot to load drivers and start Hyprland"

dotfiles/.config/environment.d/ssh-agent.conf

@@ -0,0 +1 @@
+SSH_AUTH_SOCK=${HOME}/.bitwarden-ssh-agent.sock

dotfiles/.config/foot/foot.ini

@@ -47,3 +47,11 @@ regular4=53BDFA  # blue
 regular5=FAE994  # magenta
 regular6=99faf2  # cyan
 regular7=C7C7C7  # white
+
+[key-bindings]
+clipboard-copy=Control+c XF86Copy
+clipboard-paste=Control+Shift+v XF86Paste
+
+[text-bindings]
+# Ctrl+C now copies, so send the interrupt signal (^C) from Ctrl+Shift+C instead
+\x03=Control+Shift+c

dotfiles/.config/gtk-3.0/bookmarks

@@ -3,5 +3,6 @@ file:///home/thomas/Documents
 file:///home/thomas/Downloads
 file:///home/thomas/Pictures
 file:///home/thomas/Music
+file:///home/thomas/Videos
 smb://192.168.1.84/media/
 smb://192.168.1.85/music/

dotfiles/.config/hypr/UserConfigs/ENVariables.conf

@@ -51,10 +51,10 @@ env = ELECTRON_OZONE_PLATFORM_HINT,auto # auto selects Wayland if possible, X11
 # This is from Hyprland Wiki. Below will be activated nvidia gpu detected
 # See hyprland wiki https://wiki.hyprland.org/Nvidia/#environment-variables
 
-#env = LIBVA_DRIVER_NAME,nvidia
+env = LIBVA_DRIVER_NAME,nvidia
-#env = __GLX_VENDOR_LIBRARY_NAME,nvidia
+env = __GLX_VENDOR_LIBRARY_NAME,nvidia
-#env = NVD_BACKEND,direct
+env = NVD_BACKEND,direct
-#env = GSK_RENDERER,ngl
+env = GSK_RENDERER,ngl
 
 # additional ENV's for nvidia. Caution, activate with care
 #env = GBM_BACKEND,nvidia-drm
@@ -87,3 +87,6 @@ env = ELECTRON_OZONE_PLATFORM_HINT,auto # auto selects Wayland if possible, X11
 # env = HYPRLAND_NO_RT,1 # Disables realtime priority setting by Hyprland.
 # env = HYPRLAND_NO_SD_NOTIFY,1 # If systemd, disables the 'sd_notify' calls.
 # env = HYPRLAND_NO_SD_VARS,1 # Disables management of variables in systemd and dbus activation environments.
+
+# Bitwarden SSH agent (so GUI apps like VS Code see it, not just shells)
+env = SSH_AUTH_SOCK,/home/thomas/.bitwarden-ssh-agent.sock

dotfiles/.config/hypr/UserConfigs/UserDecorations.conf

@@ -21,7 +21,7 @@ decoration {
   rounding = 10
          
   active_opacity = 1.0
-  inactive_opacity = 0.9
+  inactive_opacity = 1.0
   fullscreen_opacity = 1.0
 
   dim_inactive = true

dotfiles/.config/hypr/UserConfigs/monitors.conf

@@ -8,5 +8,5 @@
 # <<<<< TUI AUTO START
 monitor=desc:LG Electronics LG ULTRAWIDE 0x0002E68A,2560x1080@60.00000,1920x-740,1.00000000,transform,3,vrr,0
 monitor=desc:HP Inc. HP 524pf VNG447017D,1920x1080@100.00000,-1920x0,1.00000000,transform,0,vrr,0
-monitor=desc:Acer Technologies VG240Y S 0x126191DE,1920x1080@165.00301,0x0,1.00000000,transform,0,vrr,1,bitdepth,10,cm,wide
+monitor=desc:Acer Technologies VG240Y S 0x126191DE,1920x1080@165.00301,0x0,1.00000000,transform,0,vrr,0,bitdepth,10,cm,wide
 # <<<<< TUI AUTO END

dotfiles/.config/hypr/appearance/decorations.lua

@@ -24,7 +24,7 @@ hl.config({
         rounding = 10,
 
         active_opacity     = 1.0,
-        inactive_opacity    = 0.9,
+        inactive_opacity    = 1.0,
         fullscreen_opacity  = 1.0,
 
         dim_inactive = true,

dotfiles/.config/hypr/core/env.lua

@@ -49,10 +49,10 @@ hl.env("ELECTRON_OZONE_PLATFORM_HINT", "auto") -- auto selects Wayland if possib
 -- This is from the Hyprland wiki. Uncomment below if an nvidia GPU is detected.
 -- See hyprland wiki https://wiki.hyprland.org/Nvidia/#environment-variables
 
--- hl.env("LIBVA_DRIVER_NAME", "nvidia")
+hl.env("LIBVA_DRIVER_NAME", "nvidia")
--- hl.env("__GLX_VENDOR_LIBRARY_NAME", "nvidia")
+hl.env("__GLX_VENDOR_LIBRARY_NAME", "nvidia")
--- hl.env("NVD_BACKEND", "direct")
+hl.env("NVD_BACKEND", "direct")
--- hl.env("GSK_RENDERER", "ngl")
+hl.env("GSK_RENDERER", "ngl")
 
 -- additional ENV's for nvidia. Caution, activate with care
 -- hl.env("GBM_BACKEND", "nvidia-drm")
@@ -85,3 +85,6 @@ hl.env("ELECTRON_OZONE_PLATFORM_HINT", "auto") -- auto selects Wayland if possib
 -- hl.env("HYPRLAND_NO_RT", "1") -- Disables realtime priority setting by Hyprland.
 -- hl.env("HYPRLAND_NO_SD_NOTIFY", "1") -- If systemd, disables the 'sd_notify' calls.
 -- hl.env("HYPRLAND_NO_SD_VARS", "1") -- Disables management of variables in systemd and dbus activation environments.
+
+-- Bitwarden SSH agent (so GUI apps like VS Code see it, not just shells)
+hl.env("SSH_AUTH_SOCK", os.getenv("HOME") .. "/.bitwarden-ssh-agent.sock")

dotfiles/.config/hypr/core/hyprmod.lua

@@ -5,6 +5,11 @@
 -- whatever it last wrote. If you reinstall HyprMod, prefer letting its own "Migrate to Lua…"
 -- wizard take over managing this file instead of hand-editing it going forward.
 
+-- vrr forced off globally: the per-monitor vrr = 0 flag below does NOT override this when
+-- misc.vrr is 1 (tested live on Hyprland 0.56.2 — DP-2 stayed vrr:true until this global
+-- was changed). DP-2 (Acer VG240Y S) flickers under VRR when idle in fullscreen (mouse
+-- stationary -> no repaint damage -> frame delivery stalls near the panel's VRR floor).
+-- The other two monitors don't negotiate VRR at all, so this has no effect on them.
 hl.config({
     general = {
         allow_tearing = true,
@@ -13,17 +18,19 @@ hl.config({
         },
     },
     misc = {
-        vrr = 1,
+        vrr = 0,
     },
 })
 
 -- Monitors
-hl.monitor({ output = "DP-2", mode = "1920x1080@165.00Hz", position = "0x0", scale = 1, bitdepth = 10, cm = "wide" })
+hl.monitor({ output = "DP-2", mode = "1920x1080@165.00Hz", position = "0x0", scale = 1, bitdepth = 10, cm = "wide", vrr = 0 })
 
 -- Keybinds
 -- (unbind = SUPER SHIFT, Print / unbind = SUPER, up from the source .conf have no Lua equivalent needed —
 -- we just don't define a conflicting bind elsewhere; SUPER + up -> movefocus u below is otherwise identical
 -- to the one already in keybinds.lua, kept here too for parity with the original file)
-hl.bind("SUPER + Print", hl.dsp.exec_cmd("hyprshot -o " .. os.getenv("HOME") .. "/Pictures/Screenshots-Linux -m region"))
+hl.bind("SUPER + Print", hl.dsp.exec_cmd([[sh -c 'if command -v hyprshot >/dev/null; then hyprshot -o "$HOME/Pictures/Screenshots-Linux" -m region; else grim -g "$(slurp)" "$HOME/Pictures/Screenshots-Linux/$(date +%Y-%m-%d_%H-%M-%S).png" && notify-send "Screenshot saved"; fi']])) -- drag an area (hyprshot if installed, else grim/slurp)
+hl.bind("SUPER + SHIFT + S", hl.dsp.exec_cmd([[sh -c 'grim -g "$(slurp)" "$HOME/Pictures/Screenshots-Linux/$(date +%Y-%m-%d_%H-%M-%S).png" && notify-send "Screenshot saved"']])) -- region; Surface keyboard has no Print key
+hl.bind("SUPER + F6", hl.dsp.exec_cmd([[sh -c 'grim "$HOME/Pictures/Screenshots-Linux/$(date +%Y-%m-%d_%H-%M-%S).png" && notify-send "Screenshot saved"']])) -- full screen
 hl.bind("SUPER + up", hl.dsp.focus({ direction = "u" }))
-hl.bind("SUPER + SHIFT + Print", hl.dsp.exec_cmd("hyprshot -o " .. os.getenv("HOME") .. "/Pictures/Screenshots-Linux -m window"))
+hl.bind("SUPER + SHIFT + Print", hl.dsp.exec_cmd([[sh -c 'if command -v hyprshot >/dev/null; then hyprshot -o "$HOME/Pictures/Screenshots-Linux" -m window; else grim "$HOME/Pictures/Screenshots-Linux/$(date +%Y-%m-%d_%H-%M-%S).png" && notify-send "Screenshot saved"; fi']])) -- window (hyprshot) or full screen (fallback)

dotfiles/.config/hypr/core/startup.lua

@@ -13,6 +13,11 @@ hl.on("hyprland.start", function()
     -- Startup
     hl.exec_cmd("dbus-update-activation-environment --systemd WAYLAND_DISPLAY XDG_CURRENT_DESKTOP")
     hl.exec_cmd("systemctl --user import-environment WAYLAND_DISPLAY XDG_CURRENT_DESKTOP")
+    -- restart portals once the env is imported, otherwise screen sharing breaks
+    hl.exec_cmd("sleep 1 && systemctl --user restart xdg-desktop-portal-hyprland && systemctl --user restart xdg-desktop-portal")
+
+    -- Sunshine (virtual monitor only on desktop; skipped on laptops, detected by a system battery)
+    hl.exec_cmd("sleep 1 && ! ls -d /sys/class/power_supply/BAT* >/dev/null 2>&1 && hyprctl output create headless")
 
     -- Polkit (Polkit Gnome / KDE)
     hl.exec_cmd(scriptsDir .. "/Polkit.sh")
@@ -23,7 +28,7 @@ hl.on("hyprland.start", function()
     -- hl.exec_cmd("ags")
     -- hl.exec_cmd("blueman-applet")
     -- hl.exec_cmd("rog-control-center")
-    hl.exec_cmd("waybar")
+    -- hl.exec_cmd("waybar")
     hl.exec_cmd("qs") -- quickshell AGS Desktop Overview alternative
 
     -- clipboard manager
@@ -31,8 +36,12 @@ hl.on("hyprland.start", function()
     hl.exec_cmd("wl-paste --type image --watch cliphist store")
 
     -- Starting hypridle to start hyprlock
+    -- Sunshine streams hold an idle inhibitor (scripts/SunshineIdle.sh) so this never locks mid-stream
     hl.exec_cmd("hypridle")
 
+    -- Sunshine for streaming media
+    hl.exec_cmd("sunshine")
+
     -- Float + center the Bitwarden extension pop-out (window rules can't catch it — see the script)
     hl.exec_cmd(scriptsDir .. "/FloatBitwardenPopup.sh")
 
@@ -43,6 +52,7 @@ hl.on("hyprland.start", function()
     hl.exec_cmd("sleep 3 && vesktop")
     hl.dispatch(hl.dsp.focus({ workspace = 1 }))
     hl.exec_cmd("bitwarden-desktop --ozone-platform-hint=auto --silent")
+    hl.exec_cmd("seafile-applet")
 
     -- Here are a list of features available but disabled by default
     -- hl.exec_cmd("awww-daemon --format xrgb && awww img " .. os.getenv("HOME") .. "/Pictures/wallpapers/mecha-nostalgia.png") -- persistent wallpaper

dotfiles/.config/hypr/hyprland-gui.conf

@@ -2,10 +2,15 @@
 
 general:allow_tearing = 1
 general:snap:enabled = 0
-misc:vrr = 1
+# vrr forced off globally: the per-monitor vrr,0 flag below does NOT override this when
+# misc:vrr is 1 (tested live on Hyprland 0.56.2 — DP-2 stayed vrr:true until this global
+# was changed). DP-2 (Acer VG240Y S) flickers under VRR when idle in fullscreen (mouse
+# stationary -> no repaint damage -> frame delivery stalls near the panel's VRR floor).
+# The other two monitors don't negotiate VRR at all, so this has no effect on them.
+misc:vrr = 0
 
 # Monitors
-monitor = DP-2, 1920x1080@165.00Hz, 0x0, 1, bitdepth, 10, cm, wide
+monitor = DP-2, 1920x1080@165.00Hz, 0x0, 1, bitdepth, 10, cm, wide, vrr, 0
 
 # Keybinds
 unbind = SUPER SHIFT, Print

dotfiles/.config/hypr/input/keybinds.lua

@@ -116,23 +116,22 @@ hl.bind(mainMod .. " + SHIFT + tab", hl.dsp.focus({ workspace = "m-1" }))
 hl.bind(mainMod .. " + U",         hl.dsp.workspace.toggle_special("nyx"))
 hl.bind(mainMod .. " + SHIFT + U", hl.dsp.window.move({ workspace = "special:nyx" }))
 
--- The following mappings use key codes to better support various keyboard layouts
+-- Number-row keys (the Lua bind parser does not accept the code:NN keycode syntax)
--- 1 is code:10, 2 is code:11, etc
 -- Switch workspaces with mainMod + [0-9]
-for i, code in ipairs({ 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 }) do
+for i, key in ipairs({ "1", "2", "3", "4", "5", "6", "7", "8", "9", "0" }) do
-    hl.bind(mainMod .. " + code:" .. code, hl.dsp.focus({ workspace = i })) -- code:10 = key 1 ... code:19 = key 0
+    hl.bind(mainMod .. " + " .. key, hl.dsp.focus({ workspace = i }))
 end
 
 -- Move active window and follow to workspace mainMod + SHIFT + [0-9]
-for i, code in ipairs({ 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 }) do
+for i, key in ipairs({ "1", "2", "3", "4", "5", "6", "7", "8", "9", "0" }) do
-    hl.bind(mainMod .. " + SHIFT + code:" .. code, hl.dsp.window.move({ workspace = i, follow = true }))
+    hl.bind(mainMod .. " + SHIFT + " .. key, hl.dsp.window.move({ workspace = i, follow = true }))
 end
 hl.bind(mainMod .. " + SHIFT + bracketleft",  hl.dsp.window.move({ workspace = -1, follow = true })) -- brackets [
 hl.bind(mainMod .. " + SHIFT + bracketright", hl.dsp.window.move({ workspace = 1,  follow = true })) -- brackets ]
 
 -- Move active window to a workspace silently mainMod + CTRL + [0-9]
-for i, code in ipairs({ 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 }) do
+for i, key in ipairs({ "1", "2", "3", "4", "5", "6", "7", "8", "9", "0" }) do
-    hl.bind(mainMod .. " + CTRL + code:" .. code, hl.dsp.window.move({ workspace = i, follow = false }))
+    hl.bind(mainMod .. " + CTRL + " .. key, hl.dsp.window.move({ workspace = i, follow = false }))
 end
 hl.bind(mainMod .. " + CTRL + bracketleft",  hl.dsp.window.move({ workspace = -1, follow = false })) -- brackets [
 hl.bind(mainMod .. " + CTRL + bracketright", hl.dsp.window.move({ workspace = 1,  follow = false })) -- brackets ]

dotfiles/.config/hypr/layout/monitors.lua

@@ -10,5 +10,6 @@
 -- <<<<< TUI AUTO START
 hl.monitor({ output = "desc:LG Electronics LG ULTRAWIDE 0x0002E68A", mode = "2560x1080@60.00000", position = "1920x-740", scale = 1.00000000, transform = 3, vrr = 0 })
 hl.monitor({ output = "desc:HP Inc. HP 524pf VNG447017D",           mode = "1920x1080@100.00000", position = "-1920x0",   scale = 1.00000000, transform = 0, vrr = 0 })
-hl.monitor({ output = "desc:Acer Technologies VG240Y S 0x126191DE", mode = "1920x1080@165.00301", position = "0x0",       scale = 1.00000000, transform = 0, vrr = 1, bitdepth = 10, cm = "wide" })
+hl.monitor({ output = "desc:Acer Technologies VG240Y S 0x126191DE", mode = "1920x1080@165.00301", position = "0x0",       scale = 1.00000000, transform = 0, vrr = 0, bitdepth = 10, cm = "wide" })
+hl.monitor({ output = "HEADLESS-1", mode = "1728x1080@60.00000", position = "4480x0", scale = 1.00000000, transform = 0, vrr = 0 })
 -- <<<<< TUI AUTO END

dotfiles/.config/hypr/layout/windowrules.lua

@@ -137,8 +137,8 @@ hl.window_rule({ workspace = "3", match = { class = "^([Vv]esktop|[Dd]iscord|[Ss
 hl.window_rule({ size = "20% 20%", match = { class = "^([Pp]lexamp)" } })
 
 -- FLOAT
-hl.window_rule({ name = "windowrule-75", float = true, opacity = "0.9 0.7", size = "monitor_w*0.7 monitor_h*0.7", match = { tag = "wallpaper*" } })
+hl.window_rule({ name = "windowrule-75", float = true, opacity = "0.9 0.9", size = "monitor_w*0.7 monitor_h*0.7", match = { tag = "wallpaper*" } })
-hl.window_rule({ name = "windowrule-76", float = true, opacity = "0.8 0.7", size = "monitor_w*0.7 monitor_h*0.7", match = { tag = "settings*" } })
+hl.window_rule({ name = "windowrule-76", float = true, opacity = "0.8 0.8", size = "monitor_w*0.7 monitor_h*0.7", match = { tag = "settings*" } })
 hl.window_rule({ name = "windowrule-77", float = true, match = { tag = "viewer*" } })
 hl.window_rule({ name = "windowrule-78", float = true, match = { class = "([Zz]oom|onedriver|onedriver-launcher)$" } })
 hl.window_rule({ name = "windowrule-79", float = true, match = { class = "(org.gnome.Calculator)", title = "(Calculator)" } })
@@ -162,17 +162,17 @@ hl.window_rule({ name = "windowrule-92", float = true, center = true, size = "mo
 -- END of float popups and dialogue #######
 
 -- OPACITY
--- hl.window_rule({ opacity = "0.9 0.7", match = { tag = "browser*" } })
+-- hl.window_rule({ opacity = "0.9 0.9", match = { tag = "browser*" } })
--- hl.window_rule({ opacity = "0.9 0.8", match = { tag = "projects*" } })
+-- hl.window_rule({ opacity = "0.9 0.9", match = { tag = "projects*" } })
--- hl.window_rule({ opacity = "0.94 0.86", match = { tag = "im*" } })
+-- hl.window_rule({ opacity = "0.94 0.94", match = { tag = "im*" } })
--- hl.window_rule({ opacity = "0.94 0.86", match = { tag = "multimedia*" } })
+-- hl.window_rule({ opacity = "0.94 0.94", match = { tag = "multimedia*" } })
--- hl.window_rule({ opacity = "0.9 0.8", match = { tag = "file-manager*" } })
+-- hl.window_rule({ opacity = "0.9 0.9", match = { tag = "file-manager*" } })
-hl.window_rule({ name = "windowrule-93", opacity = "0.8 0.7", match = { tag = "terminal*" } })
+hl.window_rule({ name = "windowrule-93", opacity = "0.8 0.8", match = { tag = "terminal*" } })
--- hl.window_rule({ opacity = "0.82 0.75", match = { tag = "viewer*" } })
+-- hl.window_rule({ opacity = "0.82 0.82", match = { tag = "viewer*" } })
-hl.window_rule({ name = "windowrule-94", opacity = "0.8 0.7", match = { class = "^(gedit|org.gnome.TextEditor|mousepad)$" } })
+hl.window_rule({ name = "windowrule-94", opacity = "0.8 0.8", match = { class = "^(gedit|org.gnome.TextEditor|mousepad)$" } })
-hl.window_rule({ name = "windowrule-95", opacity = "0.9 0.8", match = { class = "^(deluge)$" } })
+hl.window_rule({ name = "windowrule-95", opacity = "0.9 0.9", match = { class = "^(deluge)$" } })
-hl.window_rule({ name = "windowrule-96", opacity = "0.9 0.8", match = { class = "^(seahorse)$" } }) -- gnome-keyring gui
+hl.window_rule({ name = "windowrule-96", opacity = "0.9 0.9", match = { class = "^(seahorse)$" } }) -- gnome-keyring gui
--- hl.window_rule({ opacity = "0.95 0.75", match = { title = "^(Picture-in-Picture)$" } })
+-- hl.window_rule({ opacity = "0.95 0.95", match = { title = "^(Picture-in-Picture)$" } })
 
 -- SIZE
 -- hl.window_rule({ size = "25% 25%", match = { title = "^(Firefox)$" } })

dotfiles/.config/hypr/layout/workspaces.lua

@@ -13,6 +13,7 @@
 hl.workspace_rule({ workspace = 1, monitor = "DP-2",     default = true })
 hl.workspace_rule({ workspace = 2, monitor = "DP-1",     default = true })
 hl.workspace_rule({ workspace = 3, monitor = "HDMI-A-1", default = true })
+hl.workspace_rule({ workspace = 9, monitor = "HEADLESS-1", default = true })
 -- hl.workspace_rule({ workspace = 4, monitor = "eDP-1" })
 -- hl.workspace_rule({ workspace = 5, monitor = "DP-2" })
 -- hl.workspace_rule({ workspace = 6, monitor = "DP-2" })

dotfiles/.config/hypr/scripts/MediaCtrl.sh

@@ -4,6 +4,11 @@
 
 music_icon="$HOME/.config/swaync/icons/music.png"
 
+# Use the app's own icon for known players
+case "$(playerctl metadata --format '{{playerName}}' 2>/dev/null)" in
+    Plexamp) music_icon="com.plexamp.Plexamp" ;;
+esac
+
 # Play the next track
 play_next() {
     playerctl next

dotfiles/.config/hypr/scripts/SunshineIdle.sh

@@ -0,0 +1,29 @@
+#!/bin/bash
+# Keeps hypridle from locking the screen while Sunshine is streaming.
+# Hooked up as Sunshine's global_prep_cmd, so it runs for every app:
+#   start -> hold a systemd idle inhibitor (hypridle respects these) and
+#            unlock hyprlock if the session was already locked
+#   stop  -> release the inhibitor so normal idle locking resumes
+
+pidfile="${XDG_RUNTIME_DIR:-/tmp}/sunshine-idle-inhibit.pid"
+
+case "$1" in
+    start)
+        if ! { [ -f "$pidfile" ] && kill -0 "$(cat "$pidfile")" 2>/dev/null; }; then
+            setsid systemd-inhibit --what=idle --who=Sunshine --why="Streaming" \
+                sleep infinity >/dev/null 2>&1 &
+            echo $! > "$pidfile"
+        fi
+        # SIGUSR1 tells hyprlock to unlock
+        pkill -USR1 -x hyprlock
+        ;;
+    stop)
+        [ -f "$pidfile" ] && kill "$(cat "$pidfile")" 2>/dev/null
+        rm -f "$pidfile"
+        ;;
+    *)
+        echo "Usage: $0 start|stop" >&2
+        exit 1
+        ;;
+esac
+exit 0

dotfiles/.config/hypr/scripts/Volume.sh

@@ -1,143 +1,37 @@
 #!/bin/bash
-# HyprFlux — https://github.com/ahmad9059/HyprFlux
+# Volume controls for audio and mic via wpctl (PipeWire).
-# Scripts for volume controls for audio and mic 
+# Quickshell's VolumeOsd watches PipeWire directly, so no notifications here.
 
-iDIR="$HOME/.config/swaync/icons"
+SINK="@DEFAULT_AUDIO_SINK@"
-sDIR="$HOME/.config/hypr/scripts"
+SOURCE="@DEFAULT_AUDIO_SOURCE@"
+STEP="5%"
 
-# Get Volume
+# Print volume as an integer percent, or "Muted"
 get_volume() {
-    volume=$(pamixer --get-volume)
+    local out
-    if [[ "$volume" -eq "0" ]]; then
+    out=$(wpctl get-volume "$1")
+    if [[ "$out" == *MUTED* ]]; then
         echo "Muted"
     else
-        echo "$volume %"
+        awk '{ printf "%d %%\n", $2 * 100 + 0.5 }' <<< "$out"
     fi
 }
 
-# Get icons
+is_muted() {
-get_icon() {
+    [[ "$(wpctl get-volume "$1")" == *MUTED* ]]
-    current=$(get_volume)
-    if [[ "$current" == "Muted" ]]; then
-        echo "$iDIR/volume-mute.png"
-    elif [[ "${current%\%}" -le 30 ]]; then
-        echo "$iDIR/volume-low.png"
-    elif [[ "${current%\%}" -le 60 ]]; then
-        echo "$iDIR/volume-mid.png"
-    else
-        echo "$iDIR/volume-high.png"
-    fi
 }
 
-# Notify
+# Raising/lowering while muted unmutes first, matching the old behaviour
-notify_user() {
+inc() { is_muted "$1" && wpctl set-mute "$1" 0 || wpctl set-volume -l 1.0 "$1" "$STEP+"; }
-    if [[ "$(get_volume)" == "Muted" ]]; then
+dec() { is_muted "$1" && wpctl set-mute "$1" 0 || wpctl set-volume "$1" "$STEP-"; }
-        notify-send -e -h string:x-canonical-private-synchronous:volume_notif -h boolean:SWAYNC_BYPASS_DND:true -u low -i "$(get_icon)" " Volume:" " Muted"
-    else
-        notify-send -e -h int:value:"$(get_volume | sed 's/%//')" -h string:x-canonical-private-synchronous:volume_notif -h boolean:SWAYNC_BYPASS_DND:true -u low -i "$(get_icon)" " Volume Level:" " $(get_volume)" &&
-        "$sDIR/Sounds.sh" --volume
-    fi
-}
 
-# Increase Volume
+case "$1" in
-inc_volume() {
+    --inc)        inc "$SINK" ;;
-    if [ "$(pamixer --get-mute)" == "true" ]; then
+    --dec)        dec "$SINK" ;;
-        toggle_mute
+    --toggle)     wpctl set-mute "$SINK" toggle ;;
-    else
+    --toggle-mic) wpctl set-mute "$SOURCE" toggle ;;
-        pamixer -i 5 --allow-boost --set-limit 150 && notify_user
+    --mic-inc)    inc "$SOURCE" ;;
-    fi
+    --mic-dec)    dec "$SOURCE" ;;
-}
+    --get-mic)    get_volume "$SOURCE" ;;
-
+    *)            get_volume "$SINK" ;;
-# Decrease Volume
+esac
-dec_volume() {
-    if [ "$(pamixer --get-mute)" == "true" ]; then
-        toggle_mute
-    else
-        pamixer -d 5 && notify_user
-    fi
-}
-
-# Toggle Mute
-toggle_mute() {
-	if [ "$(pamixer --get-mute)" == "false" ]; then
-		pamixer -m && notify-send -e -u low -h boolean:SWAYNC_BYPASS_DND:true -i "$iDIR/volume-mute.png" " Mute"
-	elif [ "$(pamixer --get-mute)" == "true" ]; then
-		pamixer -u && notify-send -e -u low -h boolean:SWAYNC_BYPASS_DND:true -i "$(get_icon)" " Volume:" " Switched ON"
-	fi
-}
-
-# Toggle Mic
-toggle_mic() {
-	if [ "$(pamixer --default-source --get-mute)" == "false" ]; then
-		pamixer --default-source -m && notify-send -e -u low -h boolean:SWAYNC_BYPASS_DND:true -i "$iDIR/microphone-mute.png" " Microphone:" " Switched OFF"
-	elif [ "$(pamixer --default-source --get-mute)" == "true" ]; then
-		pamixer -u --default-source u && notify-send -e -u low -h boolean:SWAYNC_BYPASS_DND:true -i "$iDIR/microphone.png" " Microphone:" " Switched ON"
-	fi
-}
-# Get Mic Icon
-get_mic_icon() {
-    current=$(pamixer --default-source --get-volume)
-    if [[ "$current" -eq "0" ]]; then
-        echo "$iDIR/microphone-mute.png"
-    else
-        echo "$iDIR/microphone.png"
-    fi
-}
-
-# Get Microphone Volume
-get_mic_volume() {
-    volume=$(pamixer --default-source --get-volume)
-    if [[ "$volume" -eq "0" ]]; then
-        echo "Muted"
-    else
-        echo "$volume %"
-    fi
-}
-
-# Notify for Microphone
-notify_mic_user() {
-    volume=$(get_mic_volume)
-    icon=$(get_mic_icon)
-    notify-send -e -h int:value:"$volume" -h "string:x-canonical-private-synchronous:volume_notif" -h boolean:SWAYNC_BYPASS_DND:true -u low -i "$icon"  " Mic Level:" " $volume"
-}
-
-# Increase MIC Volume
-inc_mic_volume() {
-    if [ "$(pamixer --default-source --get-mute)" == "true" ]; then
-        toggle_mic
-    else
-        pamixer --default-source -i 5 && notify_mic_user
-    fi
-}
-
-# Decrease MIC Volume
-dec_mic_volume() {
-    if [ "$(pamixer --default-source --get-mute)" == "true" ]; then
-        toggle-mic
-    else
-        pamixer --default-source -d 5 && notify_mic_user
-    fi
-}
-
-# Execute accordingly
-if [[ "$1" == "--get" ]]; then
-	get_volume
-elif [[ "$1" == "--inc" ]]; then
-	inc_volume
-elif [[ "$1" == "--dec" ]]; then
-	dec_volume
-elif [[ "$1" == "--toggle" ]]; then
-	toggle_mute
-elif [[ "$1" == "--toggle-mic" ]]; then
-	toggle_mic
-elif [[ "$1" == "--get-icon" ]]; then
-	get_icon
-elif [[ "$1" == "--get-mic-icon" ]]; then
-	get_mic_icon
-elif [[ "$1" == "--mic-inc" ]]; then
-	inc_mic_volume
-elif [[ "$1" == "--mic-dec" ]]; then
-	dec_mic_volume
-else
-	get_volume
-fi

dotfiles/.config/orbit/theme.toml

@@ -1,5 +0,0 @@
-accent_primary = "#007acc"
-accent_secondary = "#06b6d4"
-background = "#1e1e1e"
-foreground = "#d4d4d8"
-opacity = 0.91

dotfiles/.config/quickshell/assets/sunshine.svg

@@ -0,0 +1,27 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Generator: Adobe Illustrator 22.1.0, SVG Export Plug-In . SVG Version: 6.00 Build 0)  -->
+<svg version="1.1" id="Sunshine_Logo" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" x="0px"
+	 y="0px" width="256px" height="256px" viewBox="10 6 236 245" style="enable-background:new 0 0 256 256;" xml:space="preserve">
+<style type="text/css">
+	.st0{fill:#FDD107;}
+	.st1{fill:#F89A1C;}
+	.st2{fill:#EF3E23;}
+	.st3{fill:#F26222;}
+</style>
+<path class="st0" d="M118.7688675,20.7120476c0,0-63.8333359,26-74.3333359,83.8333282s37.1666718,91.5,86.3333282,75.3333282
+	s70.3333435-51,81.8333435-86.9999924c0,0-9.3333435,100.4999924-96.1666718,115.4999924s-118.1666641-50-82.1666641-119.8333282
+	C44.2688675,67.0453796,80.5188675,29.6287155,118.7688675,20.7120476z"/>
+<path class="st1" d="M118.7688675,20.7120476c0,0-41.125,3.6666679-83.25,61.0416679s-28.125,139.125,34.25,149.375
+	s115.8749924-44.875,133.5-82.375s15.1666718-61.4583282,9.75-77.8749924c0,0,0.6666718,36.4166641-13.3333282,59.6666641
+	s-29.75,46.3333282-65.0833282,62.1666718s-74.1666718,13.75-95.4166718-19.25s-5.9166641-76.0833359-0.2916641-85.3333359
+	S72.3938675,33.7953796,118.7688675,20.7120476z"/>
+<path class="st2" d="M73.0188675,39.6287155c0,0,38.125-28.125,76.8749924-28.125s63,28.25,68.5,52.25s6,54.125-11.5,87.6249924
+	s-37.375,56-79.1249924,76.125s-84.625,2.75-84.625,2.75s25.9769745,25.8750153,71.0509872,16.5
+	c45.0740051-9.375,82.2406769-40.875,98.4073486-69.5s28.7916565-57.3749924,27.6666565-92.2499924s-23.75-54.5-31.25-60.25
+	s-23.1875-17.8125-58.1875-16.5625S86.4563675,29.8162155,73.0188675,39.6287155z"/>
+<path class="st3" d="M73.0188675,39.6287155c0,0,35-32.8125,82.4374924-32.8125s69.1875,24.8125,78.875,44.6875
+	s21.8125,70-12.1875,122.9999924s-74.625,67.375-93.625,71.625s-42.4311447,4.269165-59.1114044-1.2299957
+	c0,0,35.1947479,8.3966675,66.7780762-7.4366608s51.6666718-32.1666718,74.0833282-68.8333435
+	s25.9166718-72.7499924,22.1666718-93.9166565s-12.1666718-42.4166718-36.5-56.3333359s-56.7291718-10.531251-74.4791641-4.531251
+	S91.9876175,26.4099655,73.0188675,39.6287155z"/>
+</svg>

dotfiles/.config/quickshell/config/SystemUpdates.qml

@@ -0,0 +1,72 @@
+pragma Singleton
+import QtQuick
+import Quickshell.Io
+
+// Shared state for SystemUpdate.qml, the bar's package-update indicator.
+// Bar.qml is instantiated once per screen (see shell.qml's Variants), so
+// without this being a singleton, plugging in extra monitors would mean
+// running `checkupdates` that many times in parallel on every poll — which
+// isn't just wasteful, it's actively unreliable: concurrent invocations
+// race over checkupdates' own sync directory and can intermittently report
+// 0 pending updates. One shared Process here means exactly one `checkupdates`
+// run at a time, and every bar's icon reflects the same result.
+QtObject {
+    id: root
+
+    // checkupdates syncs a throwaway copy of the pacman db, so it's not
+    // free to run often — matches the old waybar custom/updater module's
+    // ~21.7 minute poll interval (see .config/waybar/config).
+    readonly property int refreshIntervalMs: 1300 * 1000
+
+    property int updateCount: 0
+    property bool checking: false
+    property bool updating: false
+
+    function refresh() {
+        if (_checkProc.running) return
+        root.checking = true
+        _checkProc.running = true
+    }
+
+    // scriptPath: absolute path to update-system.sh (resolved by the caller
+    // via Quickshell.shellPath, which isn't available as a plain import
+    // here without pulling in the whole Quickshell singleton for one call).
+    function runUpdate(scriptPath) {
+        if (_updateProc.running) return
+        root.updating = true
+        _updateProc.command = [scriptPath]
+        _updateProc.running = true
+    }
+
+    // QtObject has no default property, so these are attached via property
+    // assignment rather than as plain child elements (same as Colors.qml's
+    // FileView).
+    readonly property Process _checkProc: Process {
+        command: ["sh", "-c", "checkupdates 2>/dev/null | wc -l"]
+        stdout: StdioCollector {
+            id: checkCollector
+            onStreamFinished: {
+                root.updateCount = parseInt(checkCollector.text.trim(), 10) || 0
+                root.checking = false
+            }
+        }
+    }
+
+    // Runs update-system.sh, which opens its own terminal and blocks until
+    // that terminal is closed — so this only exits once the user's actually
+    // done updating, which is exactly when a re-check matters.
+    readonly property Process _updateProc: Process {
+        onExited: {
+            root.updating = false
+            root.refresh()
+        }
+    }
+
+    readonly property Timer _timer: Timer {
+        interval: root.refreshIntervalMs
+        running: true
+        repeat: true
+        triggeredOnStart: true
+        onTriggered: root.refresh()
+    }
+}

dotfiles/.config/quickshell/config/WeatherData.qml

@@ -0,0 +1,242 @@
+pragma Singleton
+import QtQuick
+import Quickshell
+import Quickshell.Io
+
+// Live weather for the bar's Weather.qml icon. A singleton for the same
+// reason as SystemUpdates.qml: Bar.qml is instantiated once per monitor
+// (shell.qml's Variants), so without this being shared, every extra screen
+// would mean another set of network requests running in parallel.
+//
+// Location is auto-detected from the public IP (via ipwho.is, no API key)
+// and cached to disk (~/.cache/quickshell/weather-location.json) so it's
+// only ever looked up once, not on every quickshell restart — IP-geolocation
+// free tiers rate-limit fast, and a desktop's location barely ever changes
+// anyway. Only the weather itself re-polls on a timer. Conditions come from
+// Open-Meteo (api.open-meteo.com) — also free and keyless, and it does its
+// own °C/km-h conversion server-side via query params.
+//
+// Loosely modeled on omarchy's weather panel
+// (github.com/omacom/omarchy, quattro branch,
+// shell/plugins/panels/weather/Model.js) for the WMO weather-code
+// grouping, but the icons are this bar's own Material Symbols glyphs
+// rather than pulling in a separate icon font just for this.
+QtObject {
+    id: root
+
+    // Location barely ever changes for a desktop machine, so it's fetched
+    // once (and cached); the weather itself is worth re-checking
+    // periodically.
+    readonly property int refreshIntervalMs: 15 * 60 * 1000
+
+    property bool locating: true
+    property bool loading: false
+    property bool hasLocation: false
+    property string locationName: ""
+
+    property real latitude: 0
+    property real longitude: 0
+
+    function saveLocation() {
+        _locationCache.setText(JSON.stringify({
+            latitude: root.latitude,
+            longitude: root.longitude,
+            name: root.locationName
+        }))
+    }
+
+    // Called from Weather.qml's search box once you pick a result — always
+    // wins over whatever IP-based guess was cached before, and persists so
+    // it sticks across restarts.
+    function selectLocation(name, lat, lon) {
+        root.latitude = lat
+        root.longitude = lon
+        root.locationName = name
+        root.hasLocation = true
+        root.locating = false
+        root.saveLocation()
+        root.refresh()
+    }
+
+    property bool searching: false
+    property var searchResults: []
+
+    function search(query) {
+        const q = String(query || "").trim()
+        if (q.length < 2) {
+            root.searchResults = []
+            return
+        }
+        root.searching = true
+        _searchProc.command = ["curl", "-s", "--max-time", "6",
+            "https://geocoding-api.open-meteo.com/v1/search?count=5&language=en&format=json&name=" + encodeURIComponent(q)]
+        _searchProc.running = true
+    }
+
+    property real tempC: 0
+    property real feelsLikeC: 0
+    property int humidity: 0
+    property real windKmh: 0
+    property int weatherCode: 0
+    property bool isDay: true
+
+    // [{date, code, maxC, minC}] — tomorrow onward; today is already
+    // covered by the current-conditions fields above.
+    property var forecast: []
+
+    function locate() {
+        if (_locateProc.running) return
+        root.locating = true
+        _locateProc.running = true
+    }
+
+    function refresh() {
+        if (!root.hasLocation || _weatherProc.running) return
+        root.loading = true
+        _weatherProc.command = ["curl", "-s", "--max-time", "8",
+            "https://api.open-meteo.com/v1/forecast?latitude=" + root.latitude
+            + "&longitude=" + root.longitude
+            + "&current=temperature_2m,apparent_temperature,relative_humidity_2m,weather_code,is_day,wind_speed_10m"
+            + "&daily=weather_code,temperature_2m_max,temperature_2m_min"
+            + "&temperature_unit=celsius&wind_speed_unit=kmh&timezone=auto&forecast_days=4"]
+        _weatherProc.running = true
+    }
+
+    // Material Symbols Rounded glyph for a WMO weather code (see
+    // https://open-meteo.com/en/docs#weathervariables), grouped the same
+    // way omarchy's Model.js groups them into its own icon set.
+    function iconFor(code, day) {
+        if (code === 0) return day ? "sunny" : "clear_night"
+        if (code === 1 || code === 2) return day ? "partly_cloudy_day" : "partly_cloudy_night"
+        if (code === 3) return "cloud"
+        if (code === 45 || code === 48) return "foggy"
+        if ([51, 53, 55, 56, 57, 61, 63, 65, 66, 67, 80, 81, 82].indexOf(code) !== -1) return "rainy"
+        if ([71, 73, 75, 77, 85, 86].indexOf(code) !== -1) return "weather_snowy"
+        if (code === 95 || code === 96 || code === 99) return "thunderstorm"
+        return "cloud"
+    }
+
+    // QtObject has no default property, so these are attached via property
+    // assignment rather than as plain child elements (same as Colors.qml's
+    // FileView and SystemUpdates.qml's Process/Timer).
+
+    // Read once at startup; onLoaded/onLoadFailed (below) decide whether a
+    // network lookup is still needed.
+    readonly property FileView _locationCache: FileView {
+        path: Quickshell.env("HOME") + "/.cache/quickshell/weather-location.json"
+        onLoaded: {
+            try {
+                const data = JSON.parse(text())
+                const lat = parseFloat(data.latitude)
+                const lon = parseFloat(data.longitude)
+                if (!isNaN(lat) && !isNaN(lon)) {
+                    root.latitude = lat
+                    root.longitude = lon
+                    root.locationName = data.name || ""
+                    root.hasLocation = true
+                    root.locating = false
+                    root.refresh()
+                    return
+                }
+            } catch (e) {
+                // fall through to a fresh lookup below
+            }
+            root.locate()
+        }
+        onLoadFailed: root.locate()
+    }
+
+    readonly property Process _locateProc: Process {
+        command: ["curl", "-s", "--max-time", "6", "https://ipwho.is/"]
+        stdout: StdioCollector {
+            id: locateCollector
+            onStreamFinished: {
+                try {
+                    const data = JSON.parse(locateCollector.text)
+                    const lat = parseFloat(data.latitude)
+                    const lon = parseFloat(data.longitude)
+                    root.hasLocation = data.success !== false && !isNaN(lat) && !isNaN(lon)
+                    if (root.hasLocation) {
+                        root.latitude = lat
+                        root.longitude = lon
+                        root.locationName = data.city || data.region || data.country || ""
+                        root.saveLocation()
+                    }
+                } catch (e) {
+                    console.warn("Weather: locate parse failed:", e)
+                    root.hasLocation = false
+                }
+                root.locating = false
+                if (root.hasLocation) root.refresh()
+            }
+        }
+    }
+
+    readonly property Process _weatherProc: Process {
+        stdout: StdioCollector {
+            id: weatherCollector
+            onStreamFinished: {
+                try {
+                    const data = JSON.parse(weatherCollector.text)
+                    const current = data.current || {}
+                    root.tempC = current.temperature_2m
+                    root.feelsLikeC = current.apparent_temperature
+                    root.humidity = current.relative_humidity_2m
+                    root.windKmh = current.wind_speed_10m
+                    root.weatherCode = current.weather_code
+                    root.isDay = current.is_day === 1
+
+                    const daily = data.daily || {}
+                    const times = daily.time || []
+                    const days = []
+                    // Start at 1 — index 0 is today, already shown as the
+                    // current conditions above; this is "what's coming".
+                    for (let i = 1; i < times.length && days.length < 3; i++) {
+                        days.push({
+                            date: times[i],
+                            code: (daily.weather_code || [])[i],
+                            maxC: (daily.temperature_2m_max || [])[i],
+                            minC: (daily.temperature_2m_min || [])[i]
+                        })
+                    }
+                    root.forecast = days
+                } catch (e) {
+                    console.warn("Weather: failed to parse Open-Meteo response:", e)
+                }
+                root.loading = false
+            }
+        }
+    }
+
+    readonly property Process _searchProc: Process {
+        stdout: StdioCollector {
+            id: searchCollector
+            onStreamFinished: {
+                try {
+                    const data = JSON.parse(searchCollector.text)
+                    const results = data.results || []
+                    root.searchResults = results.filter(function(r) {
+                        return r && r.name && r.latitude !== undefined && r.longitude !== undefined
+                    }).map(function(r) {
+                        return {
+                            name: r.name,
+                            description: [r.admin1, r.country].filter(function(p) { return !!p }).join(", "),
+                            latitude: r.latitude,
+                            longitude: r.longitude
+                        }
+                    })
+                } catch (e) {
+                    root.searchResults = []
+                }
+                root.searching = false
+            }
+        }
+    }
+
+    readonly property Timer _timer: Timer {
+        interval: root.refreshIntervalMs
+        running: true
+        repeat: true
+        onTriggered: root.refresh()
+    }
+}

dotfiles/.config/quickshell/config/qmldir

@@ -2,3 +2,5 @@ module config
 singleton Colors 1.0 Colors.qml
 singleton Appearance 1.0 Appearance.qml
 singleton VpnExclusivity 1.0 VpnExclusivity.qml
+singleton SystemUpdates 1.0 SystemUpdates.qml
+singleton WeatherData 1.0 WeatherData.qml

dotfiles/.config/quickshell/modules/bar/Bar.qml

@@ -35,8 +35,12 @@ PanelWindow {
         ActiveWindow {}
     }
 
-    Clock {
+    RowLayout {
         anchors.centerIn: parent
+        spacing: Appearance.spacing
+        Weather { barWindow: bar }
+        Clock {}
+        SystemUpdate { barWindow: bar }
     }
 
     RowLayout {
@@ -46,7 +50,7 @@ PanelWindow {
             rightMargin: Appearance.spacing
         }
         spacing: Appearance.spacing
-        //Tray {}
+        PinnedTray {}
         TailscaleIndicator { barWindow: bar }
         VpnIndicator { barWindow: bar }
         NetworkIndicator { barWindow: bar }

dotfiles/.config/quickshell/modules/bar/NetworkIndicator.qml

@@ -222,6 +222,82 @@ Item {
         root.passwordSsid = ""
     }
 
+    // --- Captive portal ---------------------------------------------------
+    // NetworkManager tells "portal" (a walled-garden sign-in page sits
+    // between us and the real internet) apart from "full" connectivity only
+    // via an active probe — nmcli's cached CONNECTIVITY field just reflects
+    // NM's own internal check, which runs every few minutes and is far too
+    // slow to catch a portal right after joining a network. So this forces a
+    // fresh probe itself, same shell-out approach as the stats below, and
+    // runs it whenever we're connected — not gated to panel.visible like
+    // those — since the whole point is noticing this before the popup is
+    // ever opened.
+    //
+    // "limited" is treated the same as "portal", not just "full" vs.
+    // everything-else: NM only reports "portal" when the probe request
+    // actually comes back *different* (redirected/rewritten) from what it
+    // expected. Plenty of real captive portals instead black-hole every
+    // request that isn't to their own login domain, so the probe just times
+    // out — which is also why this is slow to resolve — and NM reports
+    // "limited" (it got a route/gateway, but the internet check itself
+    // never landed) rather than "portal". From the user's side both look
+    // identical: connected, but no real internet.
+    property string connectivityState: "unknown"
+    readonly property bool connectivityRestricted: root.connectivityState === "portal" || root.connectivityState === "limited"
+
+    // A plain, unencrypted HTTP page whose only job is to be interceptable
+    // by a captive portal's redirect. An https:// URL mostly just gets
+    // silently blocked instead of redirected, which looks identical to the
+    // portal not existing at all.
+    readonly property string captivePortalCheckUrl: "http://neverssl.com/"
+
+    // Auto-opened once per network join (mirrors TailscaleIndicator's
+    // openAuthUrl/_authUrlOpened) so flapping connectivity on the same
+    // network doesn't keep popping a new browser tab — the manual "Open"
+    // button in the panel banner below still works regardless.
+    property bool _portalAutoOpened: false
+    property bool _wasConnected: false
+    onConnectedDeviceChanged: {
+        const isConnected = root.connectedDevice !== null
+        if (isConnected && !root._wasConnected) {
+            root._portalAutoOpened = false
+            root.connectivityState = "unknown"
+        }
+        root._wasConnected = isConnected
+    }
+
+    onConnectivityRestrictedChanged: {
+        if (root.connectivityRestricted && !root._portalAutoOpened)
+            root.openCaptivePortal()
+    }
+
+    function openCaptivePortal() {
+        root._portalAutoOpened = true
+        Qt.openUrlExternally(root.captivePortalCheckUrl)
+    }
+
+    Process {
+        id: connectivityProc
+        command: ["nmcli", "networking", "connectivity", "check"]
+        stdout: StdioCollector {
+            id: connectivityCollector
+            onStreamFinished: root.connectivityState = connectivityCollector.text.trim()
+        }
+    }
+
+    Timer {
+        id: connectivityTimer
+        // Poll quickly while things are still unresolved (fresh join, or an
+        // active portal we're waiting to clear) and back off once
+        // connectivity is confirmed full, rather than shelling out every
+        // few seconds forever for no reason.
+        interval: root.connectivityState === "full" ? 20000 : 3000
+        repeat: true
+        triggeredOnStart: true
+        running: root.connectedDevice !== null
+        onTriggered: if (!connectivityProc.running) connectivityProc.running = true
+    }
+
     // --- Live stats --------------------------------------------------
     // None of this comes from Quickshell's Networking API — it only knows
     // about devices/networks, not throughput, ping, or routing. So this
@@ -595,6 +671,34 @@ Item {
         }
     }
 
+    // Small warning badge over the icon's corner when the connection looks
+    // restricted (a captive portal, confirmed or just suspected — see
+    // connectivityRestricted above) — same treatment as TailscaleIndicator's
+    // login-needed badge, so "this needs your attention" reads the same way
+    // across indicators.
+    Rectangle {
+        visible: root.connectivityRestricted
+        width: Math.max(7, label.font.pixelSize * 0.42)
+        height: width
+        radius: width / 2
+        color: Colors.urgent
+        border.color: Colors.surface
+        border.width: 1
+        anchors.right: label.right
+        anchors.bottom: label.bottom
+        anchors.rightMargin: -1
+        anchors.bottomMargin: -1
+
+        Text {
+            anchors.centerIn: parent
+            text: "!"
+            color: Colors.surface
+            font.family: Appearance.fontFamily
+            font.pixelSize: Math.max(6, parent.height * 0.75)
+            font.bold: true
+        }
+    }
+
     MouseArea {
         anchors.fill: parent
         cursorShape: Qt.PointingHandCursor
@@ -890,6 +994,88 @@ Item {
 
                 }
 
+                // Captive portal banner — shown when the connectivity probe
+                // above finds either a confirmed sign-in page or a
+                // "limited" result standing between this network and the
+                // real internet (see connectivityRestricted). openCaptivePortal()
+                // already fired once automatically when this was first
+                // detected; this stays up as a manual retry in case that tab
+                // got closed.
+                Rectangle {
+                    width: parent.width
+                    visible: root.connectivityRestricted
+                    radius: 0
+                    color: Qt.rgba(Colors.urgent.r, Colors.urgent.g, Colors.urgent.b, 0.18)
+                    border.color: Colors.urgent
+                    border.width: 1
+                    implicitHeight: portalBannerRow.implicitHeight + 12
+
+                    RowLayout {
+                        id: portalBannerRow
+                        anchors.fill: parent
+                        anchors.margins: 6
+                        spacing: 8
+
+                        Text {
+                            text: "lock_open"
+                            font.family: Appearance.iconFontFamilyRounded
+                            font.variableAxes: Appearance.iconFontAxes
+                            font.pixelSize: 16
+                            color: Colors.urgent
+                        }
+
+                        ColumnLayout {
+                            Layout.fillWidth: true
+                            spacing: 0
+
+                            Text {
+                                Layout.fillWidth: true
+                                text: root.connectivityState === "portal" ? "Sign-in required" : "No internet access"
+                                elide: Text.ElideRight
+                                font.family: Appearance.fontFamily
+                                font.pixelSize: Appearance.fontSize
+                                font.bold: true
+                                color: Colors.foreground
+                            }
+                            Text {
+                                Layout.fillWidth: true
+                                text: root.connectivityState === "portal"
+                                    ? "This network needs a web sign-in first"
+                                    : "This network may need a web sign-in first"
+                                elide: Text.ElideRight
+                                font.family: Appearance.fontFamily
+                                font.pixelSize: Appearance.fontSizeSmall
+                                color: Colors.muted
+                            }
+                        }
+
+                        Rectangle {
+                            implicitWidth: openPortalText.implicitWidth + 16
+                            implicitHeight: 24
+                            radius: 0
+                            color: openPortalMouse.containsMouse ? Colors.urgent : "transparent"
+                            border.color: Colors.urgent
+                            border.width: 1
+
+                            Text {
+                                id: openPortalText
+                                anchors.centerIn: parent
+                                text: "Open"
+                                font.family: Appearance.fontFamily
+                                font.pixelSize: Appearance.fontSizeSmall
+                                color: openPortalMouse.containsMouse ? Colors.primaryText : Colors.urgent
+                            }
+                            MouseArea {
+                                id: openPortalMouse
+                                anchors.fill: parent
+                                hoverEnabled: true
+                                cursorShape: Qt.PointingHandCursor
+                                onClicked: root.openCaptivePortal()
+                            }
+                        }
+                    }
+                }
+
                 // Live stats — ping/loss/throughput/IP/gateway for whichever
                 // device is currently connected.
                 GridLayout {

dotfiles/.config/quickshell/modules/bar/PinnedTray.qml

@@ -0,0 +1,110 @@
+import QtQuick
+import QtQuick.Layouts
+import Quickshell
+import Quickshell.Io
+import Quickshell.Services.SystemTray
+import Quickshell.Widgets
+import "../../config"
+
+
+RowLayout {
+    id: root
+    spacing: Appearance.spacing * 1.
+
+    
+    readonly property var pinned: [
+        {
+            name: "Bitwarden",
+            icon: Qt.resolvedUrl("../../assets/bitwarden.png"),
+            binary: "bitwarden",
+            launch: ["bitwarden"],
+            secondary: ["pkill", "bitwarden"]
+        },
+        {
+            name: "Seafile",
+            icon: "seafile",
+            binary: "seafile-applet",
+            launch: ["seafile-applet"],
+            secondary: ["pkill", "seafile-applet"]
+        },
+        {
+            name: "Sunshine",
+            icon: Qt.resolvedUrl("../../assets/sunshine.svg"),
+            binary: "sunshine",
+            launch: ["systemctl", "--user", "start", "app-dev.lizardbyte.app.Sunshine.service"],
+            secondary: ["xdg-open", "https://xol.twhomelab.tailnet:47990"],
+        },
+    ]
+
+    function findTrayItem(name) {
+        const needle = name.toLowerCase()
+        for (const item of SystemTray.items.values) {
+            if (item.id.toLowerCase().includes(needle) || item.title.toLowerCase().includes(needle))
+                return item
+        }
+        return null
+    }
+
+    Repeater {
+        model: root.pinned
+
+        delegate: Item {
+            id: slot
+            required property var modelData
+            readonly property var trayItem: root.findTrayItem(modelData.name)
+            readonly property bool running: trayItem !== null
+            property bool installed: false // Application installation check
+
+            visible: slot.installed
+            implicitWidth: Appearance.iconSize
+            implicitHeight: Appearance.iconSize
+
+            Process {
+                running: true
+                command: ["which", slot.modelData.binary]
+                onExited: (exitCode) => slot.installed = exitCode === 0
+            }
+
+            IconImage {
+                anchors.fill: parent
+                // modelData.icon is a QUrl when it comes from
+                // Qt.resolvedUrl() (Bitwarden/Sunshine's local assets), not
+                // a QString — coerce to string before using String methods
+                // on it, or this throws instead of ever matching.
+                source: slot.running
+                    ? slot.trayItem.icon
+                    : (String(slot.modelData.icon).includes("://")
+                        ? slot.modelData.icon
+                        : Quickshell.iconPath(slot.modelData.icon))
+                opacity: slot.running ? 1.0 : 0.5
+            }
+
+            Process { id: launcher }
+            Process { id: secondaryProc }
+
+            MouseArea {
+                anchors.fill: parent
+                anchors.margins: -4
+                cursorShape: Qt.PointingHandCursor
+                acceptedButtons: Qt.LeftButton | Qt.RightButton
+                onClicked: (mouse) => {
+                    if (mouse.button === Qt.RightButton) {
+                        if (slot.modelData.secondary) {
+                            if (!secondaryProc.running) {
+                                secondaryProc.command = slot.modelData.secondary
+                                secondaryProc.running = true
+                            }
+                        } else if (slot.running) {
+                            slot.trayItem.secondaryActivate()
+                        }
+                    } else if (slot.running) {
+                        slot.trayItem.activate()
+                    } else if (!launcher.running) {
+                        launcher.command = slot.modelData.launch
+                        launcher.running = true
+                    }
+                }
+            }
+        }
+    }
+}

dotfiles/.config/quickshell/modules/bar/SystemUpdate.qml

@@ -0,0 +1,194 @@
+import QtQuick
+import QtQuick.Layouts
+import Quickshell
+import Quickshell.Hyprland
+import "../../config"
+
+Item {
+    id: root
+    implicitWidth: row.implicitWidth + 6
+    implicitHeight: Appearance.barHeight
+
+    
+    required property var barWindow
+
+    RowLayout {
+        id: row
+        anchors.centerIn: parent
+        spacing: 4
+
+        Text {
+            id: label
+            font.family: SystemUpdates.checking ? Appearance.iconFontFamilyRounded : Appearance.fontFamily
+            font.variableAxes: Appearance.iconFontAxes
+            font.pixelSize: SystemUpdates.checking ? 15 : 22
+            color: Colors.foreground
+            text: SystemUpdates.checking ? "progress_activity" : "󰏖"
+
+            RotationAnimation on rotation {
+                running: SystemUpdates.checking
+                loops: Animation.Infinite
+                from: 0
+                to: 360
+                duration: 900
+                onRunningChanged: if (!running) label.rotation = 0
+            }
+        }
+
+        Text {
+            font.family: Appearance.fontFamily
+            font.pixelSize: Appearance.fontSizeSmall
+            color: label.color
+            text: SystemUpdates.updateCount
+        }
+    }
+
+    MouseArea {
+        anchors.fill: parent
+        cursorShape: Qt.PointingHandCursor
+        acceptedButtons: Qt.LeftButton | Qt.RightButton
+        onClicked: (mouse) => {
+            if (mouse.button === Qt.RightButton) {
+                SystemUpdates.refresh()
+            } else {
+                panel.visible = !panel.visible
+                grab.active = panel.visible
+            }
+        }
+    }
+
+    PopupWindow {
+        id: panel
+        visible: false
+        color: "transparent"
+        readonly property int contentWidth: 200
+        readonly property int contentPadding: 16
+        implicitWidth: contentWidth + contentPadding * 2
+        implicitHeight: mainColumn.implicitHeight + contentPadding * 2
+
+        anchor {
+            window: root.barWindow
+            rect.x: 0
+            rect.y: 0
+            rect.width: root.barWindow.width
+            rect.height: root.barWindow.height
+            edges: Edges.Bottom
+            gravity: Edges.Bottom
+            margins.bottom: -4
+        }
+
+        HyprlandFocusGrab {
+            id: grab
+            windows: [panel]
+            onCleared: panel.visible = false
+        }
+
+        Rectangle {
+            anchors.fill: parent
+            radius: 0
+            color: Colors.surface
+            border.color: Colors.muted
+            border.width: 3
+
+            Column {
+                id: mainColumn
+                anchors.fill: parent
+                anchors.margins: panel.contentPadding
+                spacing: 10
+
+                RowLayout {
+                    width: parent.width
+                    spacing: 8
+
+                    Text {
+                        text: label.text
+                        font.family: Appearance.fontFamily
+                        font.pixelSize: 23
+                        color: Colors.foreground
+                    }
+
+                    Text {
+                        Layout.fillWidth: true
+                        text: "System Update"
+                        font.family: Appearance.fontFamily
+                        font.pixelSize: 18
+                        font.bold: true
+                        color: Colors.foreground
+                    }
+                }
+
+                Text {
+                    width: parent.width
+                    wrapMode: Text.WordWrap
+                    font.family: Appearance.fontFamily
+                    font.pixelSize: Appearance.fontSize
+                    color: Colors.foreground
+                    text: {
+                        if (SystemUpdates.updating) return "Update running in a terminal…"
+                        if (SystemUpdates.checking) return "Checking for updates…"
+                        if (SystemUpdates.updateCount === 0) return "System is up to date."
+                        return SystemUpdates.updateCount + (SystemUpdates.updateCount === 1 ? " update available." : " updates available.")
+                    }
+                }
+
+                Rectangle {
+                    id: updateBtn
+                    width: parent.width
+                    radius: 0
+                    implicitHeight: btnContent.implicitHeight + 12
+                    enabled: !SystemUpdates.updating
+                    opacity: SystemUpdates.updating ? 0.5 : 1
+                    color: btnMouse.containsMouse ? Colors.primary : "transparent"
+
+                    Rectangle {
+                        anchors.fill: parent
+                        anchors.margins: -3
+                        radius: 0
+                        color: "transparent"
+                        border.color: Colors.foreground
+                        border.width: btnMouse.containsMouse ? 1 : 0
+                    }
+
+                    RowLayout {
+                        id: btnContent
+                        anchors.left: parent.left
+                        anchors.right: parent.right
+                        anchors.verticalCenter: parent.verticalCenter
+                        anchors.margins: 6
+                        spacing: 8
+
+                        Text {
+                            Layout.preferredWidth: 20
+                            horizontalAlignment: Text.AlignLeft
+                            text: "download"
+                            font.family: Appearance.iconFontFamilyRounded
+                            font.variableAxes: Appearance.iconFontAxes
+                            font.pixelSize: 14
+                            color: btnMouse.containsMouse ? Colors.primaryText : Colors.foreground
+                        }
+                        Text {
+                            Layout.fillWidth: true
+                            text: "Update Now"
+                            font.family: Appearance.fontFamily
+                            font.pixelSize: Appearance.fontSize
+                            color: btnMouse.containsMouse ? Colors.primaryText : Colors.foreground
+                        }
+                    }
+
+                    MouseArea {
+                        id: btnMouse
+                        anchors.fill: parent
+                        enabled: !SystemUpdates.updating
+                        hoverEnabled: true
+                        cursorShape: Qt.PointingHandCursor
+                        onClicked: {
+                            SystemUpdates.runUpdate(Quickshell.shellPath("scripts/update-system.sh"))
+                            panel.visible = false
+                            grab.active = false
+                        }
+                    }
+                }
+            }
+        }
+    }
+}

dotfiles/.config/quickshell/modules/bar/Tray.qml

@@ -5,7 +5,7 @@ import Quickshell.Widgets
 import "../../config"
 
 RowLayout {
-    spacing: Appearance.spacing * 0.6
+    spacing: Appearance.spacing
 
     Repeater {
         model: SystemTray.items

dotfiles/.config/quickshell/modules/bar/Volume.qml

@@ -137,15 +137,25 @@ Item {
     MouseArea {
         anchors.fill: parent
         cursorShape: Qt.PointingHandCursor
+        // Scroll distance is accumulated rather than stepping per event:
+        // a mouse wheel sends one 120-unit event per notch, but a touchpad
+        // sends a stream of tiny events, which at a fixed step per event
+        // made touchpad scrolling far too fast. One notch's worth (120) of
+        // scrolling = one volume step, regardless of input device.
+        property real wheelAccum: 0
+        readonly property real volumeStep: 0.05
+        readonly property real unitsPerStep: 120
         onClicked: {
             panel.visible = !panel.visible
             grab.active = panel.visible
         }
         onWheel: (wheel) => {
             if (!root.sink || !root.sink.audio) return
-            const step = 0.05
+            wheelAccum += wheel.angleDelta.y
-            const delta = wheel.angleDelta.y > 0 ? step : -step
+            const steps = Math.trunc(wheelAccum / unitsPerStep)
-            root.sink.audio.volume = Math.max(0, Math.min(1, root.sink.audio.volume + delta))
+            if (steps === 0) return
+            wheelAccum -= steps * unitsPerStep
+            root.sink.audio.volume = Math.max(0, Math.min(1, root.sink.audio.volume + steps * volumeStep))
         }
     }
 

dotfiles/.config/quickshell/modules/bar/VpnIndicator.qml

@@ -45,9 +45,41 @@ Item {
     // to connect once the current one has finished disconnecting.
     property string pendingConnect: ""
 
-    // Surfaced under the header for a failed connect/disconnect; cleared
+    // Surfaced under each provider's own row for a failed connect/
-    // automatically after a few seconds.
+    // disconnect/settings change; cleared automatically after a few
-    property string actionStatus: ""
+    // seconds. Kept separate per provider so an error from one doesn't
+    // show up hanging under the other's row.
+    property string mullvadActionStatus: ""
+    property string protonActionStatus: ""
+
+    // --- Mullvad advanced options (auto-connect, relay location, multihop) --
+    // ProtonVPN's CLI is plain-text-only and far less predictable across
+    // versions, so this extra panel is Mullvad-specific rather than a
+    // second ProviderRow feature.
+
+    property bool mullvadOptionsOpen: false
+    property bool mullvadAutoConnect: false
+    property bool mullvadMultihop: false
+    // Human-readable current relay constraint, e.g. "Any" or "Sweden" —
+    // resolved from `relay get`'s "country xx[ city yyy]" syntax against
+    // mullvadCountries once that list has loaded.
+    property string mullvadLocationLabel: "Any"
+    property string mullvadEntryLabel: "Any"
+    // [{name, code}], parsed from `mullvad relay list` and cached for the
+    // life of the panel — the full relay list rarely changes and re-parsing
+    // ~50 countries on every open would just be wasted work.
+    property var mullvadCountries: []
+    // "" | "exit" | "entry" — which location field's picker is open, if any.
+    property string mullvadPickerTarget: ""
+    property string mullvadPickerFilter: ""
+
+    readonly property var mullvadFilteredCountries: {
+        const f = root.mullvadPickerFilter.trim().toLowerCase()
+        if (!f) return root.mullvadCountries
+        return root.mullvadCountries.filter(function(c) {
+            return c.name.toLowerCase().indexOf(f) !== -1 || c.code.indexOf(f) !== -1
+        })
+    }
 
     function shortLine(text) {
         const line = String(text || "").trim().split("\n")[0] || ""
@@ -82,6 +114,95 @@ Item {
         VpnExclusivity.protonConnected = root.protonState === "connected"
     }
 
+    function applyMullvadAutoConnect(text) {
+        const m = String(text || "").match(/autoconnect:\s*(on|off)/i)
+        root.mullvadAutoConnect = !!m && m[1].toLowerCase() === "on"
+    }
+
+    // Resolves relay get's "any" / "country xx" / "country xx city yyy" /
+    // bare-hostname syntax into a display label. Falls back to the raw
+    // country code (or the raw string) when mullvadCountries hasn't loaded
+    // yet, rather than showing nothing.
+    function describeMullvadLocation(raw) {
+        const s = String(raw || "").trim()
+        if (!s || s === "any") return "Any"
+        const m = s.match(/^country\s+([a-z]{2})\b/i)
+        if (!m) return s
+        const code = m[1].toLowerCase()
+        const country = root.mullvadCountries.find(function(c) { return c.code === code })
+        return country ? country.name : code.toUpperCase()
+    }
+
+    function applyMullvadRelay(text) {
+        const body = String(text || "")
+        const locMatch = body.match(/^\s*Location:\s*(.+)$/mi)
+        const multihopMatch = body.match(/^\s*Multihop state:\s*(\w+)/mi)
+        const entryMatch = body.match(/^\s*Multihop entry:\s*(.+)$/mi)
+        root.mullvadMultihop = !!multihopMatch && multihopMatch[1].toLowerCase() === "enabled"
+        root.mullvadLocationLabel = root.describeMullvadLocation(locMatch ? locMatch[1].trim() : "")
+        root.mullvadEntryLabel = root.describeMullvadLocation(entryMatch ? entryMatch[1].trim() : "")
+    }
+
+    // Only country-level lines are of interest ("Sweden (se)", flush left) —
+    // city ("\tGothenburg (got) @ ...") and server lines are indented and
+    // their parenthesised code is never exactly two letters, so the regex
+    // alone is enough to tell them apart without checking indentation.
+    function applyMullvadCountries(text) {
+        const lines = String(text || "").split("\n")
+        const countries = []
+        for (const line of lines) {
+            const m = line.match(/^(\S.*) \(([a-z]{2})\)\s*$/)
+            if (m) countries.push({ name: m[1].trim(), code: m[2] })
+        }
+        countries.sort(function(a, b) { return a.name.localeCompare(b.name) })
+        root.mullvadCountries = countries
+        // Re-resolve any labels already showing raw codes now that names
+        // are available.
+        if (!mullvadRelayGetProc.running) mullvadRelayGetProc.running = true
+    }
+
+    function openMullvadOptions() {
+        root.mullvadOptionsOpen = !root.mullvadOptionsOpen
+        if (root.mullvadOptionsOpen) {
+            if (!mullvadAutoConnectGetProc.running) mullvadAutoConnectGetProc.running = true
+            if (!mullvadRelayGetProc.running) mullvadRelayGetProc.running = true
+            if (root.mullvadCountries.length === 0 && !mullvadRelayListProc.running) mullvadRelayListProc.running = true
+        } else {
+            root.mullvadPickerTarget = ""
+        }
+    }
+
+    function openMullvadPicker(target) {
+        root.mullvadPickerFilter = ""
+        root.mullvadPickerTarget = root.mullvadPickerTarget === target ? "" : target
+    }
+
+    function pickMullvadLocation(code) {
+        const target = root.mullvadPickerTarget
+        root.mullvadPickerTarget = ""
+        root.setMullvadLocation(target, code)
+    }
+
+    function setMullvadAutoConnect(on) {
+        if (mullvadAutoConnectSetProc.running) return
+        mullvadAutoConnectSetProc.command = ["mullvad", "auto-connect", "set", on ? "on" : "off"]
+        mullvadAutoConnectSetProc.running = true
+    }
+
+    function setMullvadMultihop(on) {
+        if (mullvadRelaySetProc.running) return
+        mullvadRelaySetProc.command = ["mullvad", "relay", "set", "multihop", on ? "on" : "off"]
+        mullvadRelaySetProc.running = true
+    }
+
+    function setMullvadLocation(target, code) {
+        if (mullvadRelaySetProc.running) return
+        mullvadRelaySetProc.command = target === "entry"
+            ? ["mullvad", "relay", "set", "entry", "location", code]
+            : ["mullvad", "relay", "set", "location", code]
+        mullvadRelaySetProc.running = true
+    }
+
     function refreshMullvad() {
         if (!root.mullvadInstalled) {
             if (!mullvadWhichProc.running) mullvadWhichProc.running = true
@@ -197,8 +318,8 @@ Item {
         stderr: StdioCollector { id: mullvadConnectErr }
         onExited: (exitCode, exitStatus) => {
             if (exitCode !== 0) {
-                root.actionStatus = "Mullvad: " + root.shortLine(mullvadConnectErr.text || "connect failed")
+                root.mullvadActionStatus = root.shortLine(mullvadConnectErr.text || "Connect failed")
-                actionStatusTimer.restart()
+                mullvadActionStatusTimer.restart()
             } else if (!tailscaleDownProc.running) {
                 tailscaleDownProc.running = true
             }
@@ -213,8 +334,8 @@ Item {
         stderr: StdioCollector { id: mullvadDisconnectErr }
         onExited: (exitCode, exitStatus) => {
             if (exitCode !== 0) {
-                root.actionStatus = "Mullvad: " + root.shortLine(mullvadDisconnectErr.text || "disconnect failed")
+                root.mullvadActionStatus = root.shortLine(mullvadDisconnectErr.text || "Disconnect failed")
-                actionStatusTimer.restart()
+                mullvadActionStatusTimer.restart()
             }
             root.refreshMullvad()
             if (root.pendingConnect === "mullvad") { root.pendingConnect = ""; root.connectMullvad() }
@@ -229,6 +350,77 @@ Item {
         onTriggered: if (mullvadStatusProc.running) mullvadStatusProc.running = false
     }
 
+    // --- Mullvad advanced options: auto-connect, relay location, multihop --
+    // Only queried while the options section is open (see
+    // root.openMullvadOptions), not on the regular status poll — these
+    // don't change on their own the way tunnel state does.
+
+    Process {
+        id: mullvadAutoConnectGetProc
+        command: ["mullvad", "auto-connect", "get"]
+        stdout: StdioCollector {
+            id: mullvadAutoConnectGetCollector
+            onStreamFinished: root.applyMullvadAutoConnect(mullvadAutoConnectGetCollector.text)
+        }
+    }
+
+    Process {
+        id: mullvadAutoConnectSetProc
+        stdout: StdioCollector {}
+        stderr: StdioCollector { id: mullvadAutoConnectSetErr }
+        onExited: (exitCode, exitStatus) => {
+            if (exitCode !== 0) {
+                root.mullvadActionStatus = root.shortLine(mullvadAutoConnectSetErr.text || "Auto-connect change failed")
+                mullvadActionStatusTimer.restart()
+            }
+            if (!mullvadAutoConnectGetProc.running) mullvadAutoConnectGetProc.running = true
+        }
+    }
+
+    Process {
+        id: mullvadRelayGetProc
+        command: ["mullvad", "relay", "get"]
+        stdout: StdioCollector {
+            id: mullvadRelayGetCollector
+            onStreamFinished: root.applyMullvadRelay(mullvadRelayGetCollector.text)
+        }
+    }
+
+    Process {
+        id: mullvadRelayListProc
+        command: ["mullvad", "relay", "list"]
+        stdout: StdioCollector {
+            id: mullvadRelayListCollector
+            onStreamFinished: root.applyMullvadCountries(mullvadRelayListCollector.text)
+        }
+    }
+
+    Process {
+        id: mullvadRelaySetProc
+        stdout: StdioCollector {}
+        stderr: StdioCollector { id: mullvadRelaySetErr }
+        onExited: (exitCode, exitStatus) => {
+            if (exitCode !== 0) {
+                root.mullvadActionStatus = root.shortLine(mullvadRelaySetErr.text || "Relay change failed")
+                mullvadActionStatusTimer.restart()
+            }
+            if (!mullvadRelayGetProc.running) mullvadRelayGetProc.running = true
+            // Relay constraint changes don't take effect on an already-open
+            // tunnel by themselves — kick a reconnect so switching location/
+            // multihop while connected actually moves the tunnel, instead of
+            // silently only applying on the next manual reconnect.
+            if (root.mullvadState === "connected" && !mullvadReconnectProc.running) mullvadReconnectProc.running = true
+        }
+    }
+
+    Process {
+        id: mullvadReconnectProc
+        command: ["mullvad", "reconnect"]
+        stdout: StdioCollector {}
+        stderr: StdioCollector {}
+        onExited: (exitCode, exitStatus) => root.refreshMullvad()
+    }
+
     // --- ProtonVPN ---------------------------------------------------------
 
     Process {
@@ -261,8 +453,8 @@ Item {
         stderr: StdioCollector { id: protonConnectErr }
         onExited: (exitCode, exitStatus) => {
             if (exitCode !== 0) {
-                root.actionStatus = "ProtonVPN: " + root.shortLine(protonConnectErr.text || "connect failed")
+                root.protonActionStatus = root.shortLine(protonConnectErr.text || "Connect failed")
-                actionStatusTimer.restart()
+                protonActionStatusTimer.restart()
             } else if (!tailscaleDownProc.running) {
                 tailscaleDownProc.running = true
             }
@@ -277,8 +469,8 @@ Item {
         stderr: StdioCollector { id: protonDisconnectErr }
         onExited: (exitCode, exitStatus) => {
             if (exitCode !== 0) {
-                root.actionStatus = "ProtonVPN: " + root.shortLine(protonDisconnectErr.text || "disconnect failed")
+                root.protonActionStatus = root.shortLine(protonDisconnectErr.text || "Disconnect failed")
-                actionStatusTimer.restart()
+                protonActionStatusTimer.restart()
             }
             root.refreshProton()
             if (root.pendingConnect === "mullvad") { root.pendingConnect = ""; root.connectMullvad() }
@@ -305,10 +497,17 @@ Item {
     }
 
     Timer {
-        id: actionStatusTimer
+        id: mullvadActionStatusTimer
         interval: 4000
         repeat: false
-        onTriggered: root.actionStatus = ""
+        onTriggered: root.mullvadActionStatus = ""
+    }
+
+    Timer {
+        id: protonActionStatusTimer
+        interval: 4000
+        repeat: false
+        onTriggered: root.protonActionStatus = ""
     }
 
     // --- Bar icon ------------------------------------------------------------
@@ -416,7 +615,13 @@ Item {
         property string detailText: ""
         property string state: "disconnected"
         property bool installed: true
+        // When true, shows a chevron that expands a provider-specific
+        // options section below this row (used for Mullvad's advanced
+        // options; ProtonVPN's row leaves this false).
+        property bool expandable: false
+        property bool expanded: false
         signal toggle()
+        signal expandToggle()
         width: parent ? parent.width : 0
         radius: 0
         implicitHeight: rowContent.implicitHeight + 12
@@ -477,8 +682,90 @@ Item {
                 busy: provRow.state === "connecting" || provRow.state === "disconnecting"
                 onToggled: provRow.toggle()
             }
+
+            Text {
+                visible: provRow.expandable
+                text: provRow.expanded ? "expand_less" : "expand_more"
+                font.family: Appearance.iconFontFamilyRounded
+                font.variableAxes: Appearance.iconFontAxes
+                font.pixelSize: 15
+                color: expandMouse.containsMouse ? Colors.foreground : Colors.muted
+
+                MouseArea {
+                    id: expandMouse
+                    anchors.fill: parent
+                    anchors.margins: -5
+                    hoverEnabled: true
+                    cursorShape: Qt.PointingHandCursor
+                    onClicked: provRow.expandToggle()
                 }
             }
+        }
+    }
+
+    // A single clickable "Location: Sweden ›" row inside the Mullvad
+    // options section — used for both the exit location and (when multihop
+    // is on) the entry location. Clicking routes back to root, which opens
+    // the shared country picker below rather than each field owning one.
+    component LocationField: Item {
+        id: locField
+        property string fieldLabel: ""
+        property string valueText: "Any"
+        property bool open: false
+        signal clicked()
+        width: parent ? parent.width : 0
+        implicitHeight: locRow.implicitHeight
+
+        RowLayout {
+            id: locRow
+            width: parent.width
+            spacing: 6
+
+            Text {
+                text: locField.fieldLabel
+                font.family: Appearance.fontFamily
+                font.pixelSize: Appearance.fontSizeSmall
+                color: Colors.muted
+            }
+            Text {
+                Layout.fillWidth: true
+                horizontalAlignment: Text.AlignRight
+                elide: Text.ElideRight
+                text: locField.valueText
+                font.family: Appearance.fontFamily
+                font.pixelSize: Appearance.fontSizeSmall
+                font.bold: true
+                color: Colors.foreground
+            }
+            Text {
+                text: locField.open ? "expand_less" : "chevron_right"
+                font.family: Appearance.iconFontFamilyRounded
+                font.variableAxes: Appearance.iconFontAxes
+                font.pixelSize: 14
+                color: Colors.muted
+            }
+        }
+        MouseArea {
+            anchors.fill: parent
+            cursorShape: Qt.PointingHandCursor
+            onClicked: locField.clicked()
+        }
+    }
+
+    // A failed connect/disconnect/settings-change message, shown directly
+    // under the provider row it came from rather than in one shared line
+    // for both providers — keeps an error attributed to whichever CLI it
+    // actually came from.
+    component StatusLine: Text {
+        property string message: ""
+        visible: message !== ""
+        width: parent ? parent.width : 0
+        text: message
+        font.family: Appearance.fontFamily
+        font.pixelSize: Appearance.fontSizeSmall
+        color: Colors.muted
+        wrapMode: Text.WordWrap
+    }
 
     // --- Panel -----------------------------------------------------------
 
@@ -494,7 +781,18 @@ Item {
             NumberAnimation { duration: Appearance.animationDuration; easing.type: Easing.OutCubic }
         }
 
-        onVisibleChanged: if (visible) root.refresh()
+        // Leaving mullvadOptionsOpen itself alone across opens (it's a
+        // deliberate "keep this expanded" choice), but the country picker
+        // is transient state scoped to one visit — closing the panel with
+        // it open would otherwise leave a stale filter/list waiting.
+        onVisibleChanged: {
+            if (visible) {
+                root.refresh()
+            } else {
+                root.mullvadPickerTarget = ""
+                root.mullvadPickerFilter = ""
+            }
+        }
 
         anchor {
             window: root.barWindow
@@ -548,28 +846,202 @@ Item {
                     }
                 }
 
-                Text {
-                    visible: root.actionStatus !== ""
-                    width: parent.width
-                    text: root.actionStatus
-                    font.family: Appearance.fontFamily
-                    font.pixelSize: Appearance.fontSizeSmall
-                    color: Colors.muted
-                    wrapMode: Text.WordWrap
-                }
-
                 Column {
                     width: parent.width
                     spacing: 2
 
+                    // Mullvad's connect row and its advanced options share a
+                    // single bordered card — the border wraps the whole
+                    // section (row, status line, and options together) and
+                    // grows to include the options/picker as they open,
+                    // rather than the options having a separate box of
+                    // their own below an unbordered connect row.
+                    Rectangle {
+                        width: parent.width
+                        radius: 0
+                        color: Colors.background
+                        border.color: Colors.muted
+                        border.width: 1
+                        implicitHeight: mullvadSectionColumn.implicitHeight + 16
+                        clip: true
+                        // Without this, the card snapped to its new size
+                        // instantly while the popup around it was still
+                        // animating open, so the border visibly lagged
+                        // behind (or cut off) content like the country
+                        // picker appearing/disappearing beneath it.
+                        Behavior on implicitHeight {
+                            NumberAnimation { duration: Appearance.animationDuration; easing.type: Easing.OutCubic }
+                        }
+
+                        Column {
+                            id: mullvadSectionColumn
+                            anchors.left: parent.left
+                            anchors.right: parent.right
+                            anchors.top: parent.top
+                            anchors.margins: 8
+                            spacing: 8
+
                             ProviderRow {
                                 label: "Mullvad"
                                 subIcon: "gpp_good"
                                 state: root.mullvadState
                                 detailText: root.mullvadDetail
                                 installed: root.mullvadInstalled
+                                expandable: root.mullvadInstalled
+                                expanded: root.mullvadOptionsOpen
                                 onToggle: root.toggleMullvad()
+                                onExpandToggle: root.openMullvadOptions()
                             }
+
+                            StatusLine { message: root.mullvadActionStatus }
+
+                            // Advanced options — auto-connect, exit/entry
+                            // relay location, multihop.
+                            Column {
+                                id: mullvadOptionsColumn
+                                width: parent.width
+                                visible: root.mullvadOptionsOpen && root.mullvadInstalled
+                                spacing: 8
+
+                            RowLayout {
+                                width: parent.width
+                                Text {
+                                    Layout.fillWidth: true
+                                    text: "Auto-connect"
+                                    font.family: Appearance.fontFamily
+                                    font.pixelSize: Appearance.fontSizeSmall
+                                    color: Colors.foreground
+                                }
+                                ToggleSwitch {
+                                    checked: root.mullvadAutoConnect
+                                    busy: mullvadAutoConnectSetProc.running
+                                    onToggled: root.setMullvadAutoConnect(!root.mullvadAutoConnect)
+                                }
+                            }
+
+                            RowLayout {
+                                width: parent.width
+                                Text {
+                                    Layout.fillWidth: true
+                                    text: "Multihop"
+                                    font.family: Appearance.fontFamily
+                                    font.pixelSize: Appearance.fontSizeSmall
+                                    color: Colors.foreground
+                                }
+                                ToggleSwitch {
+                                    checked: root.mullvadMultihop
+                                    busy: mullvadRelaySetProc.running
+                                    onToggled: root.setMullvadMultihop(!root.mullvadMultihop)
+                                }
+                            }
+
+                            LocationField {
+                                fieldLabel: root.mullvadMultihop ? "Exit" : "Location"
+                                valueText: root.mullvadLocationLabel
+                                open: root.mullvadPickerTarget === "exit"
+                                onClicked: root.openMullvadPicker("exit")
+                            }
+
+                            LocationField {
+                                visible: root.mullvadMultihop
+                                fieldLabel: "Entry"
+                                valueText: root.mullvadEntryLabel
+                                open: root.mullvadPickerTarget === "entry"
+                                onClicked: root.openMullvadPicker("entry")
+                            }
+
+                            // Shared country picker for whichever LocationField
+                            // was last clicked — filter box plus a capped,
+                            // scrollable list ("Any" always pinned first).
+                            Column {
+                                width: parent.width
+                                visible: root.mullvadPickerTarget !== ""
+                                spacing: 6
+
+                                Rectangle {
+                                    width: parent.width
+                                    implicitHeight: 24
+                                    radius: 0
+                                    color: Colors.surface
+                                    border.color: Colors.muted
+                                    border.width: 1
+
+                                    Text {
+                                        anchors.fill: parent
+                                        anchors.margins: 6
+                                        visible: mullvadFilterInput.text.length === 0
+                                        text: "Search country…"
+                                        font.family: Appearance.fontFamily
+                                        font.pixelSize: Appearance.fontSizeSmall
+                                        color: Colors.muted
+                                    }
+
+                                    TextInput {
+                                        id: mullvadFilterInput
+                                        anchors.fill: parent
+                                        anchors.margins: 6
+                                        color: Colors.foreground
+                                        font.family: Appearance.fontFamily
+                                        font.pixelSize: Appearance.fontSizeSmall
+                                        clip: true
+                                        focus: root.mullvadPickerTarget !== ""
+                                        text: root.mullvadPickerFilter
+                                        onTextChanged: root.mullvadPickerFilter = text
+                                    }
+                                }
+
+                                Flickable {
+                                    id: mullvadPickerFlick
+                                    width: parent.width
+                                    height: Math.min(mullvadPickerColumn.implicitHeight, 150)
+                                    contentWidth: width
+                                    contentHeight: mullvadPickerColumn.implicitHeight
+                                    clip: true
+                                    boundsBehavior: Flickable.StopAtBounds
+
+                                    Column {
+                                        id: mullvadPickerColumn
+                                        width: mullvadPickerFlick.width
+                                        spacing: 1
+
+                                        Repeater {
+                                            model: [{ name: "Any", code: "any" }].concat(root.mullvadFilteredCountries)
+                                            Rectangle {
+                                                required property var modelData
+                                                width: parent.width
+                                                implicitHeight: 22
+                                                radius: 0
+                                                color: countryMouse.containsMouse ? Colors.primary : "transparent"
+
+                                                Text {
+                                                    anchors.left: parent.left
+                                                    anchors.right: parent.right
+                                                    anchors.verticalCenter: parent.verticalCenter
+                                                    anchors.leftMargin: 4
+                                                    anchors.rightMargin: 4
+                                                    elide: Text.ElideRight
+                                                    text: modelData.name
+                                                    font.family: Appearance.fontFamily
+                                                    font.pixelSize: Appearance.fontSizeSmall
+                                                    color: countryMouse.containsMouse ? Colors.primaryText : Colors.foreground
+                                                }
+
+                                                MouseArea {
+                                                    id: countryMouse
+                                                    anchors.fill: parent
+                                                    hoverEnabled: true
+                                                    cursorShape: Qt.PointingHandCursor
+                                                    onClicked: root.pickMullvadLocation(modelData.code)
+                                                }
+                                            }
+                                        }
+                                    }
+                                }
+                            }
+                            }
+                        }
+                    }
+
                     ProviderRow {
                         label: "ProtonVPN"
                         subIcon: "gpp_good"
@@ -578,6 +1050,8 @@ Item {
                         installed: root.protonInstalled
                         onToggle: root.toggleProton()
                     }
+
+                    StatusLine { message: root.protonActionStatus }
                 }
 
                 Text {

dotfiles/.config/quickshell/modules/bar/Weather.qml

@@ -0,0 +1,413 @@
+import QtQuick
+import QtQuick.Layouts
+import Quickshell
+import Quickshell.Hyprland
+import "../../config"
+
+// Weather indicator — modeled on omarchy's weather bar pill
+// (github.com/omacom/omarchy, quattro branch,
+// shell/plugins/panels/weather) but rebuilt in this bar's own style: the
+// actual location/polling logic lives in the WeatherData singleton (config/),
+// shared across every monitor's bar; this is just the icon + panel UI,
+// same split as SystemUpdate.qml.
+Item {
+    id: root
+    implicitWidth: row.implicitWidth + 2
+    implicitHeight: Appearance.barHeight
+
+    // The bar's own PanelWindow — same barWindow-anchoring convention as
+    // every other popup-having module here (Volume.qml, SystemUpdate.qml,
+    // etc.), so the panel opens in a fixed spot rather than following this
+    // icon's exact position in its RowLayout.
+    required property var barWindow
+
+    readonly property bool busy: WeatherData.locating || WeatherData.loading
+
+    // Local to this popup instance — unlike WeatherData's own state, there's
+    // no need to share an in-progress search across monitors' bars.
+    property bool searchOpen: false
+    property string searchQuery: ""
+
+    RowLayout {
+        id: row
+        anchors.centerIn: parent
+        spacing: 4
+
+        Text {
+            id: label
+            font.family: Appearance.iconFontFamilyRounded
+            font.variableAxes: Appearance.iconFontAxes
+            font.pixelSize: 18
+            color: Colors.foreground
+            // Same spinner treatment as SystemUpdate.qml/
+            // BluetoothIndicator.qml's scan spinner while the location or
+            // conditions are still loading.
+            text: root.busy ? "progress_activity" : (WeatherData.hasLocation ? WeatherData.iconFor(WeatherData.weatherCode, WeatherData.isDay) : "cloud_off")
+
+            RotationAnimation on rotation {
+                running: root.busy
+                loops: Animation.Infinite
+                from: 0
+                to: 360
+                duration: 900
+                onRunningChanged: if (!running) label.rotation = 0
+            }
+        }
+
+        Text {
+            visible: WeatherData.hasLocation && !WeatherData.locating
+            font.family: Appearance.fontFamily
+            font.pixelSize: Appearance.fontSizeSmall
+            color: Colors.foreground
+            text: Math.round(WeatherData.tempC) + "°"
+        }
+    }
+
+    MouseArea {
+        anchors.fill: parent
+        cursorShape: Qt.PointingHandCursor
+        acceptedButtons: Qt.LeftButton | Qt.RightButton
+        onClicked: (mouse) => {
+            if (mouse.button === Qt.RightButton) {
+                WeatherData.refresh()
+            } else {
+                panel.visible = !panel.visible
+                grab.active = panel.visible
+            }
+        }
+    }
+
+    PopupWindow {
+        id: panel
+        visible: false
+        color: "transparent"
+        // Same contentWidth/contentPadding split as the other panels
+        // (Volume.qml, SystemUpdate.qml, etc.) rather than a single magic
+        // implicitWidth.
+        readonly property int contentWidth: 220
+        readonly property int contentPadding: 16
+        implicitWidth: contentWidth + contentPadding * 2
+        implicitHeight: mainColumn.implicitHeight + contentPadding * 2
+
+        anchor {
+            window: root.barWindow
+            // Unlike anchor.item, anchor.window doesn't default rect to the
+            // window's own bounds — set it explicitly so edges/gravity below
+            // resolve against the full bar. Bottom alone (no Left/Right)
+            // anchors to the bar's bottom-center, which lines up with this
+            // icon since it sits in the bar's centered RowLayout.
+            rect.x: 0
+            rect.y: 0
+            rect.width: root.barWindow.width
+            rect.height: root.barWindow.height
+            edges: Edges.Bottom
+            gravity: Edges.Bottom
+            margins.bottom: -4
+        }
+
+        HyprlandFocusGrab {
+            id: grab
+            windows: [panel]
+            onCleared: panel.visible = false
+        }
+
+        Rectangle {
+            anchors.fill: parent
+            radius: 0
+            color: Colors.surface
+            border.color: Colors.muted
+            border.width: 3
+
+            Column {
+                id: mainColumn
+                anchors.fill: parent
+                anchors.margins: panel.contentPadding
+                spacing: 10
+
+                RowLayout {
+                    width: parent.width
+                    spacing: 8
+
+                    Text {
+                        text: label.text
+                        font.family: Appearance.iconFontFamilyRounded
+                        font.variableAxes: Appearance.iconFontAxes
+                        font.pixelSize: 28
+                        color: Colors.foreground
+                    }
+
+                    ColumnLayout {
+                        Layout.fillWidth: true
+                        spacing: 0
+
+                        Text {
+                            Layout.fillWidth: true
+                            elide: Text.ElideRight
+                            text: {
+                                if (WeatherData.locating) return "Locating…"
+                                if (!WeatherData.hasLocation) return "Location unavailable"
+                                return WeatherData.locationName || "Weather"
+                            }
+                            font.family: Appearance.fontFamily
+                            font.pixelSize: 18
+                            font.bold: true
+                            color: Colors.foreground
+                        }
+
+                        Text {
+                            visible: WeatherData.hasLocation && !WeatherData.locating
+                            text: WeatherData.loading ? "Updating…" : "Feels like " + Math.round(WeatherData.feelsLikeC) + "°"
+                            font.family: Appearance.fontFamily
+                            font.pixelSize: Appearance.fontSizeSmall
+                            color: Colors.muted
+                        }
+                    }
+
+                    Text {
+                        visible: WeatherData.hasLocation && !WeatherData.locating
+                        text: Math.round(WeatherData.tempC) + "°"
+                        font.family: Appearance.fontFamily
+                        font.pixelSize: 28
+                        font.bold: true
+                        color: Colors.foreground
+                    }
+
+                    // Toggles the search box below — same tap target size
+                    // and hover feedback as the picker-target rows in
+                    // VpnIndicator.qml.
+                    Text {
+                        text: root.searchOpen ? "close" : "edit_location"
+                        font.family: Appearance.iconFontFamilyRounded
+                        font.variableAxes: Appearance.iconFontAxes
+                        font.pixelSize: 16
+                        color: editLocationMouse.containsMouse ? Colors.primary : Colors.muted
+
+                        MouseArea {
+                            id: editLocationMouse
+                            anchors.fill: parent
+                            anchors.margins: -4
+                            hoverEnabled: true
+                            cursorShape: Qt.PointingHandCursor
+                            onClicked: {
+                                root.searchOpen = !root.searchOpen
+                                root.searchQuery = ""
+                                WeatherData.searchResults = []
+                            }
+                        }
+                    }
+                }
+
+                // City search — always available regardless of how the
+                // current location was resolved (IP guess or a previous
+                // search), so a wrong auto-detected city is one click away
+                // from being fixed. Same search-box + result-list shape as
+                // VpnIndicator.qml's Mullvad location picker.
+                Column {
+                    visible: root.searchOpen
+                    width: parent.width
+                    spacing: 6
+
+                    Rectangle {
+                        width: parent.width
+                        implicitHeight: 24
+                        radius: 0
+                        color: Colors.surface
+                        border.color: Colors.muted
+                        border.width: 1
+
+                        Text {
+                            anchors.fill: parent
+                            anchors.margins: 6
+                            visible: citySearchInput.text.length === 0
+                            text: "Search city…"
+                            font.family: Appearance.fontFamily
+                            font.pixelSize: Appearance.fontSizeSmall
+                            color: Colors.muted
+                        }
+
+                        TextInput {
+                            id: citySearchInput
+                            anchors.fill: parent
+                            anchors.margins: 6
+                            color: Colors.foreground
+                            font.family: Appearance.fontFamily
+                            font.pixelSize: Appearance.fontSizeSmall
+                            clip: true
+                            focus: root.searchOpen
+                            text: root.searchQuery
+                            onTextChanged: {
+                                root.searchQuery = text
+                                searchDebounce.restart()
+                            }
+                        }
+
+                        Timer {
+                            id: searchDebounce
+                            interval: 400
+                            onTriggered: WeatherData.search(root.searchQuery)
+                        }
+                    }
+
+                    Text {
+                        visible: WeatherData.searching
+                        text: "Searching…"
+                        font.family: Appearance.fontFamily
+                        font.pixelSize: Appearance.fontSizeSmall
+                        color: Colors.muted
+                    }
+
+                    Text {
+                        visible: !WeatherData.searching && citySearchInput.text.length >= 2 && WeatherData.searchResults.length === 0
+                        text: "No matches"
+                        font.family: Appearance.fontFamily
+                        font.pixelSize: Appearance.fontSizeSmall
+                        color: Colors.muted
+                    }
+
+                    Flickable {
+                        width: parent.width
+                        height: Math.min(resultsColumn.implicitHeight, 150)
+                        contentWidth: width
+                        contentHeight: resultsColumn.implicitHeight
+                        clip: true
+                        boundsBehavior: Flickable.StopAtBounds
+
+                        Column {
+                            id: resultsColumn
+                            width: parent.width
+                            spacing: 1
+
+                            Repeater {
+                                model: WeatherData.searchResults
+
+                                delegate: Rectangle {
+                                    required property var modelData
+                                    width: parent.width
+                                    implicitHeight: resultText.implicitHeight + 8
+                                    radius: 0
+                                    color: resultMouse.containsMouse ? Colors.primary : "transparent"
+
+                                    Text {
+                                        id: resultText
+                                        anchors.left: parent.left
+                                        anchors.right: parent.right
+                                        anchors.verticalCenter: parent.verticalCenter
+                                        anchors.margins: 4
+                                        elide: Text.ElideRight
+                                        text: modelData.description ? (modelData.name + " — " + modelData.description) : modelData.name
+                                        font.family: Appearance.fontFamily
+                                        font.pixelSize: Appearance.fontSizeSmall
+                                        color: resultMouse.containsMouse ? Colors.primaryText : Colors.foreground
+                                    }
+
+                                    MouseArea {
+                                        id: resultMouse
+                                        anchors.fill: parent
+                                        hoverEnabled: true
+                                        cursorShape: Qt.PointingHandCursor
+                                        onClicked: {
+                                            WeatherData.selectLocation(modelData.name, modelData.latitude, modelData.longitude)
+                                            root.searchOpen = false
+                                            root.searchQuery = ""
+                                            WeatherData.searchResults = []
+                                        }
+                                    }
+                                }
+                            }
+                        }
+                    }
+                }
+
+                // Humidity / wind — same two-stat layout, just laid out as
+                // a row of icon+value pairs rather than full sentences.
+                RowLayout {
+                    visible: WeatherData.hasLocation && !WeatherData.locating
+                    width: parent.width
+                    spacing: 16
+
+                    RowLayout {
+                        spacing: 4
+                        Text {
+                            text: "water_drop"
+                            font.family: Appearance.iconFontFamilyRounded
+                            font.variableAxes: Appearance.iconFontAxes
+                            font.pixelSize: 14
+                            color: Colors.muted
+                        }
+                        Text {
+                            text: WeatherData.humidity + "%"
+                            font.family: Appearance.fontFamily
+                            font.pixelSize: Appearance.fontSizeSmall
+                            color: Colors.foreground
+                        }
+                    }
+
+                    RowLayout {
+                        spacing: 4
+                        Text {
+                            text: "air"
+                            font.family: Appearance.iconFontFamilyRounded
+                            font.variableAxes: Appearance.iconFontAxes
+                            font.pixelSize: 14
+                            color: Colors.muted
+                        }
+                        Text {
+                            text: Math.round(WeatherData.windKmh) + " km/h"
+                            font.family: Appearance.fontFamily
+                            font.pixelSize: Appearance.fontSizeSmall
+                            color: Colors.foreground
+                        }
+                    }
+                }
+
+                Rectangle {
+                    visible: WeatherData.forecast.length > 0
+                    width: parent.width
+                    height: 1
+                    color: Colors.muted
+                }
+
+                RowLayout {
+                    visible: WeatherData.forecast.length > 0
+                    width: parent.width
+                    spacing: 4
+
+                    Repeater {
+                        model: WeatherData.forecast
+
+                        delegate: ColumnLayout {
+                            required property var modelData
+                            Layout.fillWidth: true
+                            spacing: 2
+
+                            Text {
+                                Layout.alignment: Qt.AlignHCenter
+                                text: Qt.formatDateTime(new Date(modelData.date + "T12:00:00"), "ddd")
+                                font.family: Appearance.fontFamily
+                                font.pixelSize: Appearance.fontSizeSmall
+                                color: Colors.muted
+                            }
+
+                            Text {
+                                Layout.alignment: Qt.AlignHCenter
+                                text: WeatherData.iconFor(modelData.code, true)
+                                font.family: Appearance.iconFontFamilyRounded
+                                font.variableAxes: Appearance.iconFontAxes
+                                font.pixelSize: 18
+                                color: Colors.foreground
+                            }
+
+                            Text {
+                                Layout.alignment: Qt.AlignHCenter
+                                text: Math.round(modelData.maxC) + "°/" + Math.round(modelData.minC) + "°"
+                                font.family: Appearance.fontFamily
+                                font.pixelSize: Appearance.fontSizeSmall
+                                color: Colors.foreground
+                            }
+                        }
+                    }
+                }
+            }
+        }
+    }
+}

dotfiles/.config/quickshell/modules/bar/Workspaces.qml

@@ -37,7 +37,8 @@ RowLayout {
             MouseArea {
                 anchors.fill: parent
                 cursorShape: Qt.PointingHandCursor
-                onClicked: Hyprland.dispatch("workspace " + modelData.name)
+                // Hyprland's Lua config expects Lua syntax from dispatch
+                onClicked: Hyprland.dispatch("hl.dsp.focus({ workspace = " + JSON.stringify(modelData.id > 0 ? modelData.id : modelData.name) + " })")
             }
         }
     }

dotfiles/.config/quickshell/modules/osd/VolumeOsd.qml

@@ -11,16 +11,13 @@ PanelWindow {
     color: "transparent"
     exclusiveZone: 0
 
-    // Top-right, just under the bar — same fixed distance from the bar and
+    // Bottom-center: anchoring only the bottom edge lets the layer shell
-    // screen edge (Appearance.spacing) that every popup opened from the bar
+    // center it horizontally.
-    // itself uses, so this lines up with them instead of floating
+    anchors { bottom: true }
-    // bottom-center.
+    margins.bottom: Appearance.spacing * 4
-    anchors { top: true; right: true }
-    margins.top: Appearance.spacing
-    margins.right: Appearance.spacing
 
-    implicitWidth: 272
+    implicitWidth: 300
-    implicitHeight: 54
+    implicitHeight: 60
 
     WlrLayershell.layer: WlrLayer.Overlay
     WlrLayershell.namespace: "quickshell:osd"
@@ -49,13 +46,13 @@ PanelWindow {
 
         RowLayout {
             anchors.fill: parent
-            anchors.margins: 14
+            anchors.margins: 15
-            spacing: 12
+            spacing: 13
 
             Text {
                 font.family: Appearance.iconFontFamilyRounded
                 font.variableAxes: Appearance.iconFontAxes
-                font.pixelSize: 18
+                font.pixelSize: 21
                 color: Colors.foreground
                 text: {
                     const audio = osd.sink ? osd.sink.audio : null
@@ -67,7 +64,7 @@ PanelWindow {
             Item {
                 id: slider
                 Layout.fillWidth: true
-                implicitHeight: 16
+                implicitHeight: 18
 
                 readonly property real value: osd.sink && osd.sink.audio ? osd.sink.audio.volume : 0
                 readonly property bool enabled: !!osd.sink
@@ -76,7 +73,7 @@ PanelWindow {
                     id: track
                     anchors.verticalCenter: parent.verticalCenter
                     width: parent.width
-                    height: 4
+                    height: 5
                     radius: 0
                     color: Colors.muted
                     opacity: 0.35
@@ -85,15 +82,15 @@ PanelWindow {
                     anchors.verticalCenter: parent.verticalCenter
                     anchors.left: parent.left
                     width: track.width * Math.max(0, Math.min(1, slider.value))
-                    height: 4
+                    height: 5
                     radius: 0
                     color: Colors.primary
                     opacity: slider.enabled ? 1 : 0.4
                 }
                 Rectangle {
-                    width: 12
+                    width: 14
-                    height: 12
+                    height: 14
-                    radius: 6
+                    radius: 7
                     color: Colors.primary
                     opacity: slider.enabled ? 1 : 0.4
                     anchors.verticalCenter: parent.verticalCenter
@@ -113,10 +110,10 @@ PanelWindow {
             }
 
             Text {
-                Layout.preferredWidth: 32
+                Layout.preferredWidth: 38
                 horizontalAlignment: Text.AlignRight
                 font.family: Appearance.fontFamily
-                font.pixelSize: Appearance.fontSizeSmall
+                font.pixelSize: 13
                 color: Colors.muted
                 text: Math.round(slider.value * 100) + "%"
             }

dotfiles/.config/quickshell/scripts/sync-dotfiles.sh

@@ -0,0 +1,50 @@
+#!/bin/bash
+# Run by update-system.sh inside the update terminal, before the system
+# update — pulls the dotfiles repo and re-stows it so both machines pick up
+# config changes on every update.
+#
+# Never fails the update: a pull that can't fast-forward (local commits or
+# uncommitted changes in the way) or a stow conflict just prints a warning
+# and leaves things as they were, then the system update carries on.
+
+DOTFILES="$HOME/Projects/dotfiles"
+
+warn() { printf '\033[1;33m%s\033[0m\n' "$*"; }
+info() { printf '\033[1;36m%s\033[0m\n' "$*"; }
+
+if [ ! -d "$DOTFILES/.git" ]; then
+  warn "Dotfiles repo not found at $DOTFILES — skipping."
+  exit 0
+fi
+
+info "Pulling dotfiles..."
+# Fetch and merge separately so the warning says which one went wrong — the
+# remote is SSH via Bitwarden's agent, so a failed fetch is almost always
+# Bitwarden being closed or locked.
+if ! git -C "$DOTFILES" fetch; then
+  warn "Couldn't reach the dotfiles remote — is Bitwarden open and unlocked? Skipping stow."
+  echo
+  exit 0
+fi
+# --ff-only so a diverged branch never produces a surprise merge commit;
+# sort that out by hand instead.
+if ! git -C "$DOTFILES" merge --ff-only; then
+  warn "Couldn't fast-forward dotfiles (local changes or diverged branch) — skipping stow."
+  echo
+  exit 0
+fi
+
+if ! command -v stow &> /dev/null; then
+  warn "stow not installed — skipping."
+  exit 0
+fi
+
+info "Applying dotfiles with stow..."
+# -R restows: drops links for files removed from the repo and adds new ones.
+if stow -R -d "$DOTFILES" -t "$HOME" dotfiles; then
+  info "Dotfiles applied."
+else
+  warn "stow hit a conflict — nothing was changed. Fix it and re-run:"
+  warn "  stow -R -d $DOTFILES -t ~ dotfiles"
+fi
+echo

dotfiles/.config/quickshell/scripts/update-system.sh

@@ -0,0 +1,66 @@
+#!/bin/bash
+# Launched by SystemUpdate.qml (top bar, next to the clock) — opens a
+# terminal running whatever update command fits this distro, then notifies
+# once it's done. Ported from the old waybar custom/updater module
+# (.config/waybar/scripts/update-distro.sh); kept multi-distro even though
+# this machine is Arch, since these dotfiles aren't.
+#
+# The window it opens is floated + centered by a matching Hyprland rule
+# (system-update-terminal, in .config/hypr/UserConfigs/WindowRules.conf),
+# same treatment as Bitwarden's window, rather than tiling into whatever
+# workspace you happened to be on.
+
+iDIR="$HOME/.config/swaync/images"
+
+if ! command -v foot &> /dev/null; then
+  notify-send -i "$iDIR/error.png" "Need foot:" "foot terminal not found. Please install foot terminal."
+  exit 1
+fi
+
+# Printed inside the terminal before the actual update command runs, so it
+# reads as "updating" from the first frame rather than looking like an
+# empty/stuck window while pacman/apt/etc. take a moment to start printing.
+#
+# foot runs this in a fresh `bash -c`, which doesn't inherit shell functions
+# from this script's own environment (export -f only reaches bash processes
+# forked from *this* one, not whatever foot execs) — so instead, the
+# already-colored text is built once here with real escape bytes ($'...'),
+# then %q-quoted into a self-contained `echo '...'` that reproduces those
+# same bytes verbatim when the child bash parses it.
+msg="  Updating System — please wait  "
+line=$(printf '=%.0s' $(seq 1 ${#msg}))
+banner_text=$'\033[1;36m'"$line"$'\033[0m\n\033[1;36m'"$msg"$'\033[0m\n\033[1;36m'"$line"$'\033[0m\n\n'
+BANNER="echo $(printf '%q' "$banner_text")"
+
+if command -v paru &> /dev/null; then
+  CMD="paru -Syu"
+  LABEL="Arch-based system"
+elif command -v yay &> /dev/null; then
+  CMD="yay -Syu"
+  LABEL="Arch-based system"
+elif command -v dnf &> /dev/null; then
+  CMD="sudo dnf update --refresh -y"
+  LABEL="Fedora system"
+elif command -v apt &> /dev/null; then
+  CMD="sudo apt update && sudo apt upgrade -y"
+  LABEL="Debian/Ubuntu system"
+elif command -v zypper &> /dev/null; then
+  CMD="sudo zypper dup -y"
+  LABEL="openSUSE system"
+else
+  notify-send -i "$iDIR/error.png" -u critical "Unsupported system" "This script does not support your distribution."
+  exit 1
+fi
+
+# Keeps the terminal open (whether the update succeeded or failed — read
+# always runs regardless, since it's ; not &&) until you press Enter,
+# instead of foot closing the instant the update command exits and taking
+# any output/errors with it.
+WAIT_PROMPT="echo; read -p 'Update finished — press Enter to close...'"
+
+# Pull + re-stow the dotfiles first, so config changes from the other machine
+# land alongside the package update.
+SYNC="$(printf '%q' "$(dirname "$0")/sync-dotfiles.sh")"
+
+foot -T update bash -c "$BANNER; $SYNC; $CMD; $WAIT_PROMPT"
+notify-send -i "$iDIR/profile-pic.jpg" -u low "$LABEL" 'has been updated.'

dotfiles/.config/quickshell/shell.qml

@@ -4,7 +4,11 @@ import "./modules/osd"
 
 ShellRoot {
     Variants {
-        model: Quickshell.screens
+        // Exclude the Sunshine headless virtual monitor — nobody ever sees a
+        // bar there, but PanelWindow's exclusiveZone still reserves space for
+        // it, which left a black strip cut out of Steam Big Picture's
+        // fullscreen area on that output.
+        model: Quickshell.screens.filter(s => !s.name.startsWith("HEADLESS"))
 
         Bar {
             required property var modelData

dotfiles/.config/sunshine/.gitignore

@@ -0,0 +1,5 @@
+# Machine-local Sunshine state lives next to the stowed config; never commit it
+credentials/
+*.log
+*.log.*
+sunshine_state.json

dotfiles/.config/sunshine/apps.json

@@ -0,0 +1,47 @@
+{
+  "env": {
+    "PATH": "$(PATH):$(HOME)/.local/bin"
+  },
+  "apps": [
+    {
+      "name": "Desktop",
+      "image-path": "desktop.png"
+    },
+    {
+      "name": "Low Res Desktop",
+      "image-path": "desktop.png",
+      "prep-cmd": [
+        {
+          "do": "xrandr --output HDMI-1 --mode 1920x1080",
+          "undo": "xrandr --output HDMI-1 --mode 1920x1200"
+        }
+      ]
+    },
+    {
+      "name": "Steam Big Picture",
+      "detached": [
+        "setsid steam steam://open/bigpicture"
+      ],
+      "prep-cmd": [
+        {
+          "do": "/home/thomas/.config/sunshine/scripts/steam-bigpicture-prep.sh",
+          "undo": "setsid steam steam://close/bigpicture"
+        }
+      ],
+      "image-path": "steam.png"
+    },
+    {
+      "name": "Steam Big Picture (TV)",
+      "detached": [
+        "setsid steam steam://open/bigpicture"
+      ],
+      "prep-cmd": [
+        {
+          "do": "/home/thomas/.config/sunshine/scripts/steam-bigpicture-tv-prep.sh",
+          "undo": "/home/thomas/.config/sunshine/scripts/steam-bigpicture-tv-undo.sh"
+        }
+      ],
+      "image-path": "steam.png"
+    }
+  ]
+}

dotfiles/.config/sunshine/scripts/steam-bigpicture-prep.sh

@@ -0,0 +1,17 @@
+#!/bin/sh
+# Run before Sunshine launches Steam Big Picture: focus the headless virtual
+# monitor and park the cursor on it, so Big Picture (which spawns on whatever
+# monitor currently has focus/the mouse) opens there instead of wherever the
+# mouse happened to be.
+set -e
+hyprctl dispatch 'hl.dsp.focus({monitor = "HEADLESS-1"})'
+hyprctl dispatch 'hl.dsp.cursor.move({x = 5344, y = 540})'
+
+# Sunshine only flips the system default audio sink to sink-sunshine-stereo
+# after the streaming session/client handshake completes (~500ms after this
+# script runs and Steam is spawned) — see sunshine.log timestamps. If Steam's
+# own audio (SDL) initializes in that window, it binds to whatever was
+# default at the time (the real HDMI output) and never re-homes even after
+# Sunshine's swap. Set it here first so it's already correct before Steam
+# ever launches; Sunshine's own (redundant) swap right after is harmless.
+pactl set-default-sink sink-sunshine-stereo || true

dotfiles/.config/sunshine/scripts/steam-bigpicture-tv-prep.sh

@@ -0,0 +1,18 @@
+#!/bin/sh
+# Run before Sunshine launches Steam Big Picture for the 4K TV target.
+# Switches the headless virtual monitor from its default 1728x1080@60
+# (used for the Steam Deck target) up to 3840x2160@60, then focuses it
+# and parks the cursor there so Big Picture opens on it. Reverted by
+# steam-bigpicture-tv-undo.sh once the stream ends.
+set -e
+# NOTE: this Hyprland build uses the Lua config layer, which rejects the
+# usual `hyprctl keyword monitor ...` syntax ("keyword can't work with
+# non-legacy parsers. Use eval.") — hl.monitor() via `hyprctl eval` is the
+# runtime equivalent of the hl.monitor() call in layout/monitors.lua.
+hyprctl eval 'hl.monitor({ output = "HEADLESS-1", mode = "3840x2160@60.00000", position = "4480x0", scale = 1.00000000, transform = 0, vrr = 0 })'
+hyprctl dispatch 'hl.dsp.focus({monitor = "HEADLESS-1"})'
+hyprctl dispatch 'hl.dsp.cursor.move({x = 6400, y = 1080})'
+
+# See steam-bigpicture-prep.sh for why this runs here instead of relying on
+# Sunshine's own post-handshake audio-sink swap.
+pactl set-default-sink sink-sunshine-stereo || true

dotfiles/.config/sunshine/scripts/steam-bigpicture-tv-undo.sh

@@ -0,0 +1,6 @@
+#!/bin/sh
+# Undo for steam-bigpicture-tv-prep.sh: close Big Picture and restore
+# HEADLESS-1 to its default mode (the one the Steam Deck target expects).
+set -e
+setsid steam steam://close/bigpicture
+hyprctl eval 'hl.monitor({ output = "HEADLESS-1", mode = "1728x1080@60.00000", position = "4480x0", scale = 1.00000000, transform = 0, vrr = 0 })'

dotfiles/.config/sunshine/sunshine.conf

@@ -0,0 +1,5 @@
+audio_sink = sink-sunshine-stereo
+csrf_allowed_origins = https://xol.twhomelab.local:47990
+nvenc_preset = 4
+output_name = HEADLESS-1
+global_prep_cmd = [{"do":"/home/thomas/.config/hypr/scripts/SunshineIdle.sh start","undo":"/home/thomas/.config/hypr/scripts/SunshineIdle.sh stop"}]

dotfiles/.config/waybar/config

@@ -13,7 +13,7 @@
         "tooltip-format": "{ipaddr} via {gwaddr}",
         "tooltip-format-disconnected": "Disconnected",
         "max-length": 50,
-        "on-click": "orbit toggle top-right",
+        "on-click": "nm-connection-editor",
         "on-click-right": "kitty -e nmtui",
         "format-icons": {
             "wifi": ["󰤯", "󰤟", "󰤢", "󰤥", "󰤨"],

dotfiles/.local/bin/Plex

@@ -0,0 +1,18 @@
+#!/bin/sh
+# Wrapper for the plex-desktop package's /usr/bin/Plex (-> /opt/plex-desktop/Plex.sh).
+#
+# QT_QUICK_CONTROLS_STYLE=org.hyprland.style is set globally in
+# hypr/core/env.lua for other Qt/QML apps' theming (hyprland-qt-support), but
+# Plex Desktop bundles its own private Qt/QML runtime that doesn't ship that
+# style plugin — inheriting the var makes it fail to load its UI and exit
+# immediately with "module \"org.hyprland.style\" is not installed" (see
+# ~/.local/share/plex/Logs/Plex.log). This dir is first on $PATH, so it
+# shadows /usr/bin/Plex for both a terminal launch and the .desktop entry
+# (Exec=Plex is PATH-resolved) without touching the global env var.
+# QT_QPA_PLATFORM: hypr env sets "wayland;xcb"; under Wayland the bundled
+# QtWebEngine never runs the web client and the window stays blank.
+unset QT_QUICK_CONTROLS_STYLE
+export QT_QPA_PLATFORM=xcb
+# Unset in the session; without it the X11 cursor in Plex is huge.
+export XCURSOR_SIZE=24
+exec /opt/plex-desktop/Plex.sh "$@"

dotfiles/.local/share/applications/tv.plex.PlexDesktop.desktop

@@ -0,0 +1,31 @@
+# User override of /usr/share/applications/tv.plex.PlexDesktop.desktop
+# (~/.local/share/applications takes XDG precedence over /usr/share for the
+# same filename, so this is picked up by app launchers instead automatically
+# — no association/mimeapps changes needed).
+#
+# QT_QPA_PLATFORM=xcb is kept from upstream: hypr env sets "wayland;xcb", and
+# under Wayland the bundled QtWebEngine never runs the web client (blank
+# window, no [Web] lines in Plex.log). XCURSOR_SIZE=24 is also kept from
+# upstream: it is unset in the session, so the X11 cursor comes out huge.
+#
+# Change from upstream: Exec unsets QT_QUICK_CONTROLS_STYLE and calls
+# the package's Plex.sh directly, bypassing $PATH entirely. Plex Desktop
+# bundles its own private Qt/QML runtime that doesn't ship the
+# "org.hyprland.style" QQC2 style hypr/core/env.lua sets globally for other
+# apps' theming — inheriting it makes Plex fail to load its UI and exit
+# immediately with "module \"org.hyprland.style\" is not installed" (see
+# ~/.local/share/plex/Logs/Plex.log). Going straight to the fixed install
+# path (rather than relying on the .local/bin/Plex wrapper shadowing
+# /usr/bin/Plex on $PATH) means this keeps working even if $PATH order ever
+# changes.
+[Desktop Entry]
+Type=Application
+Name=Plex
+Comment=Plex client for desktop computers
+Exec=env -u QT_QUICK_CONTROLS_STYLE QT_QPA_PLATFORM=xcb XCURSOR_SIZE=24 /opt/plex-desktop/Plex.sh
+Icon=tv.plex.PlexDesktop
+Terminal=false
+Categories=AudioVideo;Player;X-Media;
+X-Flatpak=tv.plex.PlexDesktop
+StartupWMClass=Plex
+Name[en_US]=Plex

dotfiles/.ssh/config

@@ -0,0 +1,14 @@
+Host 192.168.1.87
+  HostName 192.168.1.87
+  User thoams
+  ForwardAgent yes
+
+Host 192.168.1.83
+  HostName 192.168.1.83
+  User thoams
+  ForwardAgent yes
+
+Host 192.168.1.86
+  HostName 192.168.1.86
+  User thoams
+  ForwardAgent yes

dotfiles/.zshrc

@@ -23,7 +23,7 @@ source $ZSH/oh-my-zsh.sh
 
 # My alias
 
-alias cl='clear'
+alias cl='clear && fastfetch'
 alias zed='zeditor'
 alias ssh-gavin='ssh thoams@192.168.1.83'
 alias ssh-raspberry-pi='ssh thoams@192.168.1.86'
@@ -51,3 +51,4 @@ export ZED_ALLOW_EMULATED_GPU=1
 fastfetch
 
 eval "$(oh-my-posh init zsh --config $HOME/.config/ohmyposh/zen.toml)"
+export PATH="$HOME/.local/share/turritopsis/flutter-sdk/bin:$PATH"

system/install.sh

@@ -0,0 +1,11 @@
+#!/usr/bin/env bash
+# Installs system-level config that stow can't manage (needs root).
+set -euo pipefail
+
+repo="$(cd "$(dirname "$0")" && pwd)"
+
+# pacman: shared [options] snippet
+sudo install -m644 "$repo/pacman/options.conf" /etc/pacman.d/options.conf
+if ! grep -q '^Include = /etc/pacman.d/options.conf' /etc/pacman.conf; then
+    sudo sed -i '/^\[options\]/a Include = /etc/pacman.d/options.conf' /etc/pacman.conf
+fi

system/packages.txt

@@ -0,0 +1,197 @@
+# ============================================================================
+# Packages installed by bootstrap.sh on a new machine.
+#
+#   - One package per line; anything after "#" is a description.
+#   - Lines starting with "#" are skipped (left here for reference).
+#   - [section] lines tell bootstrap.sh which installer to use;
+#     [services] lists systemd units to enable.
+#
+# Not listed here (bootstrap.sh handles them itself):
+#   - CPU microcode and GPU drivers: auto-detected from the hardware
+#   - yay: bootstrapped from the AUR before the [aur] section
+#   - svt-av1-essential-git: optional, also rebuilds ffmpeg against it
+# ============================================================================
+
+[pacman]
+adw-gtk-theme                      # Unofficial GTK 3 port of the libadwaita theme
+# amd-ucode                          # Microcode update image for AMD CPUs  -- auto-detected by bootstrap.sh
+awww                               # An Answer to your Wayland Wallpaper Woes
+baobab                             # A graphical directory tree analyzer
+base                               # Minimal package set to define a basic Arch Linux installation
+base-devel                         # Basic tools to build Arch Linux packages
+blueman                            # GTK+ Bluetooth Manager
+bluez                              # Daemons for the bluetooth protocol stack
+bluez-utils                        # Development and debugging utilities for the bluetooth protocol stack
+btop                               # A monitor of system resources, bpytop ported to C++
+dolphin                            # KDE File Manager
+# dunst                              # Customizable and lightweight notification-daemon  !! you use swaync for notifications
+efibootmgr                         # Linux user-space application to modify the EFI Boot Manager
+fastfetch                          # A feature-rich and performance oriented neofetch like system information tool
+ffmpeg                             # Complete solution to record, convert and stream audio and video
+filezilla                          # Fast and reliable FTP, FTPS and SFTP client
+firefox                            # Fast, Private & Safe Web Browser
+flatpak                            # Linux application sandboxing and distribution framework (formerly xdg-app)
+foot                               # Fast, lightweight, and minimalistic Wayland terminal emulator
+fzf                                # Command-line fuzzy finder
+galculator                         # GTK based scientific calculator
+# garcon                            # Freedesktop.org compliant menu library  !! XFCE desktop leftover?
+gdu                                # Fast disk usage analyzer
+git                                # the fast distributed version control system
+gnome-calendar                     # Simple and beautiful calendar application designed to perfectly fit the GNOME desktop
+gnome-disk-utility                 # Disk Management Utility for GNOME
+gnome-font-viewer                  # A font viewer utility for GNOME
+gnome-keyring                      # Stores passwords and encryption keys
+gnome-text-editor                  # A simple text editor for the GNOME desktop
+grim                               # Screenshot utility for Wayland
+gst-plugin-pipewire                # Multimedia graph framework - pipewire plugin
+gvfs                               # Virtual filesystem implementation for GIO
+gvfs-smb                           # Virtual filesystem implementation for GIO - SMB/CIFS backend (Windows file sharing)
+htop                               # Interactive process viewer
+hypridle                           # hyprland’s idle daemon
+hyprland                           # a highly customizable dynamic tiling Wayland compositor
+hyprlock                           # hyprland’s GPU-accelerated screen locking utility
+hyprshot                           # Hyprland screenshot utility
+imv                                # Image viewer for Wayland and X11
+jq                                 # Command-line JSON processor
+# kitty                              # A modern, hackable, featureful, OpenGL-based terminal emulator  !! you use foot as terminal (kitty config not in dotfiles)
+libgsf                             # Extensible I/O abstraction library for dealing with structured file formats
+libmatroska                        # Matroska library
+libpulse                           # A featureful, general-purpose sound server (client library)
+# libva-nvidia-driver                # VA-API implementation that uses NVDEC as a backend  -- auto-detected by bootstrap.sh
+linux                              # The Linux kernel and modules
+linux-firmware                     # Firmware files for Linux - Default set
+mkinitcpio                         # Modular initramfs image creation utility
+mkvtoolnix-cli                     # Set of tools to create, edit and inspect Matroska files
+mpv                                # a free, open source, and cross-platform media player
+mullvad-vpn-daemon                 # Mullvad VPN client (daemon and CLI)
+nano                               # Pico editor clone with enhancements
+network-manager-applet             # Applet for managing network connections
+networkmanager                     # Network connection manager and user applications
+noto-fonts                         # Google Noto TTF fonts
+noto-fonts-cjk                     # Google Noto CJK fonts
+noto-fonts-emoji                   # Google Noto Color Emoji font
+noto-fonts-extra                   # Google Noto TTF fonts - additional variants
+npm                                # JavaScript package manager
+nss-mdns                           # glibc plugin providing host name resolution via mDNS
+# nvidia-open                        # NVIDIA open kernel modules  -- auto-detected by bootstrap.sh
+pacman-contrib                     # Contributed scripts and tools for pacman systems
+pam-u2f                            # Universal 2nd Factor (U2F) PAM authentication module from Yubico
+papirus-icon-theme                 # Papirus icon theme
+pipewire                           # Low-latency audio/video router and processor
+pipewire-alsa                      # Low-latency audio/video router and processor - ALSA configuration
+pipewire-jack                      # Low-latency audio/video router and processor - JACK replacement
+pipewire-pulse                     # Low-latency audio/video router and processor - PulseAudio replacement
+pnpm                               # Fast, disk space efficient package manager
+polkit-kde-agent                   # Daemon providing a polkit authentication UI for KDE
+postgresql                         # Sophisticated object-relational DBMS
+postgresql-libs                    # Sophisticated object-relational DBMS - Client binaries and libraries
+proton-vpn-cli                     # Official ProtonVPN CLI Linux app
+qt5-wayland                        # Provides APIs for Wayland
+qt6-quickeffectmaker               # Qt Quick Effect Maker (QQEM) for creating and editing custom shader effects
+qt6-wayland                        # Provides APIs for Wayland
+rofi                               # A window switcher, application launcher and dmenu replacement
+sddm                               # QML based X11 and Wayland display manager
+slurp                              # Select a region in a Wayland compositor
+smartmontools                      # Control and monitor S.M.A.R.T. enabled ATA and SCSI Hard Drives
+steam                              # Valve's digital software delivery system
+stow                               # Manage installation of multiple softwares in the same directory tree
+sudo                               # Give certain users the ability to run some commands as root
+swaync                             # A simple GTK based notification daemon for Sway
+tailscale                          # A mesh VPN that makes it easy to connect your devices, wherever they are.
+thunar                             # Modern, fast and easy-to-use file manager for Xfce
+thunar-archive-plugin              # Adds archive operations to the Thunar file context menus
+thunar-media-tags-plugin           # Adds special features for media files to the Thunar File Manager
+thunar-shares-plugin               # Thunar plugin to quickly share a folder using Samba without requiring root access
+thunar-volman                      # Automatic management of removable drives and media for Thunar
+ttf-dejavu                         # Font family based on the Bitstream Vera Fonts with a wider range of characters
+ttf-iosevka-nerd                   # Patched font Iosevka from nerd fonts library
+ttf-jetbrains-mono                 # Typeface for developers, by JetBrains
+ttf-jetbrains-mono-nerd            # Patched font JetBrains Mono from nerd fonts library
+ttf-liberation                     # Font family which aims at metric compatibility with Arial, Times New Roman, and Courier New
+ttf-material-icons                 # Material Design icons by Google (deprecated classic Material Icons static style)
+ttf-material-symbols-variable      # Material Design icons by Google (Material Symbols - 4 axis variable)
+ttf-noto-nerd                      # Patched font Noto from nerd fonts library
+tumbler                            # Thumbnail service implementing the thumbnail management D-Bus specification
+uv                                 # An extremely fast Python package installer and resolver written in Rust
+uwsm                               # A standalone Wayland session manager
+vim                                # Vi Improved, a highly configurable, improved version of the vi text editor
+# waybar                             # Highly customizable Wayland bar for Sway and Wlroots based compositors  !! you've switched to quickshell (waybar is commented out in startup.lua)
+webp-pixbuf-loader                 # WebM GDK Pixbuf Loader library
+wget                               # Network utility to retrieve files from the web
+wireplumber                        # Session / policy manager implementation for PipeWire
+# wofi                               # launcher for wlroots-based wayland compositors  !! you also have rofi — need both?
+wpa_supplicant                     # A utility providing key negotiation for WPA wireless networks
+xarchiver                          # GTK frontend to various command line archivers
+xdg-desktop-portal-hyprland        # xdg-desktop-portal backend for hyprland
+xdg-utils                          # Command line tools that assist applications with a variety of desktop integration tasks
+# xfce4-appfinder                    # Application launcher and finder  !! XFCE desktop leftover?
+# xfce4-panel                        # Panel for the Xfce desktop environment  !! XFCE desktop leftover?
+# xfce4-power-manager                # Power Manager for Xfce  !! XFCE desktop leftover?
+# xfce4-session                      # Xfce's session manager  !! XFCE desktop leftover?
+# xfce4-settings                     # Xfce's Configuration System  !! XFCE desktop leftover?
+# xfce4-terminal                     # A modern terminal emulator primarily for the Xfce desktop environment  !! XFCE desktop leftover?
+# xfdesktop                          # Xfce's desktop manager  !! XFCE desktop leftover?
+# xfwm4                              # Xfce's window manager  !! XFCE desktop leftover?
+zram-generator                     # Systemd unit generator for zram devices
+zsh                                # A very advanced and programmable command interpreter (shell) for UNIX
+
+# Used by the dotfiles, previously only pulled in by caelestia-shell / waybar
+brightnessctl                      # Backlight control (quickshell, hypr keybinds)
+cliphist                           # Clipboard history (wl-paste watcher in startup.lua)
+playerctl                          # Media key control
+power-profiles-daemon              # Power profiles (quickshell battery widget)
+wl-clipboard                       # wl-copy / wl-paste
+openssh                            # SSH client/server (sshd service, git over ssh)
+avahi                              # mDNS daemon (avahi-daemon service, used by nss-mdns)
+
+[aur]
+bitwarden-bin                      # A secure and free password manager for all of your devices.
+# caelestia-shell                    # The desktop shell for the Caelestia dotfiles  !! alternative quickshell config, not used by your shell.qml
+flutter-bin                        # Cross platform widget toolkit for Dart (monolithic)
+google-chrome                      # The popular web browser by Google (Stable Channel)
+hyprmod                            # Native GTK4/libadwaita settings app for Hyprland
+# jellyfin-desktop-debug             # Detached debugging symbols for jellyfin-desktop  !! debug symbols, not needed
+minecraft-launcher                 # Official Minecraft Launcher
+# orbit-wifi                         # A WiFi/Bluetooth manager for Wayland with glassmorphism UI  !! removed from your config in commit 88484f8
+plex-desktop                       # Plex desktop client for linux
+plexamp-bin                        # Modern music client for Plex.(Prebuilt version.Use system-wide electron)
+puddletag                          # An audio tag editor for GNU/Linux
+quickshell-git                     # The shell your bar/OSD run on (previously a caelestia-shell dependency)
+pwvucontrol                        # Pipewire volume control for GNOME
+python-pywal                       # Generate and change colorschemes on the fly
+raw-thumbnailer                    # A lightweight and fast raw image thumbnailer that can be used by file managers.
+seafile-client                     # GUI client for synchronizing your local files with seafile server
+sunshine                           # Self-hosted game stream host for Moonlight
+# svt-av1-essential-git              # A no-nonsense SVT-AV1 encoder fork with sensible defaults and Quality of Life improvements  -- optional step in bootstrap.sh (rebuilds ffmpeg)
+ttf-icomoon-feather                # Icomoon feather font
+tumbler-extra-thumbnailers         # Customized thumbnailers for Tumbler
+turritopsis                        # Desktop Jellyfin client with mpv playback
+vesktop                            # A standalone Electron-based Discord app with Vencord & improved Linux support
+visual-studio-code-bin             # Visual Studio Code (vscode)
+waypaper                           # GUI wallpaper setter for Wayland and Xorg window managers. It works as a frontend for popular wallpaper backends like swaybg, swww, wallutils, hyprpaper and feh.
+# yay                                # Yet another yogurt. Pacman wrapper and AUR helper written in go.  !! bootstrapped by the script itself anyway
+# yay-debug                          # Detached debugging symbols for yay  !! debug symbols, not needed
+zen-browser-bin                    # Official package for Zen, a privacy-focused, feature packed Firefox-based web browser
+
+[flatpak]
+com.makemkv.MakeMKV                # MakeMKV
+org.jellyfin.JellyfinDesktop       # Jellyfin Desktop
+
+[installer]  # official install scripts, see bootstrap.sh
+claude                             # Claude Code CLI (official install script)
+oh-my-posh                         # Prompt theme engine (official install script; your theme is already in dotfiles)
+# ffmpeg                             # Static ffmpeg build — !! duplicate, ffmpeg is also installed via pacman above
+# python3.13                         # Standalone Python 3.13 — !! probably not needed, uv can provide Python
+
+[services]  # enabled with systemctl, start on next boot
+NetworkManager.service             # Networking
+bluetooth.service                  # Bluetooth
+sddm.service                       # Login screen
+sshd.service                       # SSH server
+avahi-daemon.service               # mDNS / .local hostnames
+systemd-resolved.service           # DNS resolver (used by the VPNs)
+systemd-timesyncd.service          # Clock sync
+fstrim.timer                       # Weekly SSD trim
+tailscaled.service                 # Tailscale
+mullvad-daemon.service             # Mullvad VPN
+proton.VPN.service                 # Proton VPN

system/pacman/options.conf

@@ -0,0 +1,5 @@
+# Shared pacman [options], included from /etc/pacman.conf.
+# Installed to /etc/pacman.d/options.conf by system/install.sh.
+Color
+#ILoveCandy
+#VerbosePkgLists

system/rebuild-ffmpeg.sh

@@ -0,0 +1,27 @@
+#!/usr/bin/env bash
+# Rebuilds Arch's ffmpeg package from source so it links against the installed
+# svt-av1-essential-git instead of the repo svt-av1 it was built with.
+#
+# Re-run this after a `pacman -Syu` that updates ffmpeg, otherwise the repo
+# build replaces this one.
+set -euo pipefail
+
+if ! pacman -Qq svt-av1-essential-git >/dev/null 2>&1; then
+    echo "svt-av1-essential-git is not installed; nothing to rebuild against." >&2
+    exit 1
+fi
+
+build="$(mktemp -d)"
+trap 'rm -rf "$build"' EXIT
+
+git clone --depth 1 https://gitlab.archlinux.org/archlinux/packaging/packages/ffmpeg.git "$build/ffmpeg"
+cd "$build/ffmpeg"
+
+# The PKGBUILD verifies a signed ffmpeg tag; makepkg won't fetch the keys itself
+mapfile -t keys < <(source ./PKGBUILD && printf '%s\n' "${validpgpkeys[@]}")
+if (( ${#keys[@]} )); then
+    gpg --keyserver hkps://keyserver.ubuntu.com --recv-keys "${keys[@]}"
+fi
+
+# No --needed: the version matches what's installed, we want it replaced anyway
+makepkg --syncdeps --install --cleanbuild --noconfirm